Thanks for this video. Was very helpful during my install.

@CrashCitySxS

Жыл бұрын

Awesome!!!!

Awesome video and knowledge! helped me with my regular turbo gear reduction!

@CrashCitySxS

2 жыл бұрын

Awesome!

Great video guys always enjoy all the information you share with us keep up the great work!🤘👍

@CrashCitySxS

2 жыл бұрын

Thank ya sir. Finishing up hydro steer in sprinkles and will be working on that video very very soon...

@jackfirth6855

2 жыл бұрын

@@CrashCitySxS can't wait to see how she does!

Great vid. I bet that's helpful to a lot of people out there. 💯

@CrashCitySxS

2 жыл бұрын

Thanks!

Another cool video. We will be utilizing the bread trick real soon! 👍

@CrashCitySxS

2 жыл бұрын

Thanks! We used grease when we did ours but the bread is a whole lot easier to clean up!

Another great job!

@CrashCitySxS

2 жыл бұрын

Thanks!

Thanks for posting this

We pulled that 4seater transmission 4 times lol thank you for your help! we would've never figured it out

@CrashCitySxS

2 жыл бұрын

Anytime!!

Love the bread trick. Ive used it on worn pilot bushings as well.

@CrashCitySxS

Жыл бұрын

Heck yes

Another trick to remove the primary is put Teflon tape on puller and fill hole with water. Works like a charm! I tried the bread trick but the pro xp clutch wasn’t moving until the water trick

Great vid!! Would you guys ever do a gear reduction vid on the older XP 1000? (2014-2015) Love how you two keep it real!!!!!

@CrashCitySxS

Жыл бұрын

Ya we been talking about it since the non turbo transmission is the only one we haven’t filmed.

Another good one!

@CrashCitySxS

2 жыл бұрын

Thank ya sir! How’s the reduction treating you?

@genebond

2 жыл бұрын

@@CrashCitySxS It's perfect. Thanks again for doing it for me! I've got about another 500 miles on since the reduction. I got the power back from the 32" tire swap. No belt problems now!

Dang dude I bet you could do that blind folded! Very impressive and thanks!

@CrashCitySxS

2 жыл бұрын

Haha. We’ve talked about doing one blindfolded 🤣🤣🤣

Man you guys know your stuff wish I could bring mine down there and let y'all do it lol

@CrashCitySxS

Жыл бұрын

Time for a road trip!!

Quick tip for removing those axles that are threadloc on without heat. Use a 2 arm puller pops em right off.

@CrashCitySxS

Жыл бұрын

I wondered about that on the last one we did. THANKS for the tip!

Just got me a 2022 pro xp and I'm needing to come see yall soon.

@CrashCitySxS

2 жыл бұрын

Awesome! Congrats on the new ride!! We can fix ya up!

Great vid looks almost identical to my turbo s. Also I can’t get my wife to hang out haha

Hey maybe I should move down there where you guys are at and help me work on my Razor love your videos

@CrashCitySxS

2 жыл бұрын

Haha. Thanks! As busy as we are lately we may make you help us!

The large gear set that you tapped in with the dead blow (@35:00) if you're not upgrading the retaining ring do you have to remove that particular gear set? Seems you only pulled it out to show where the 4 bolt older style retaining ring was.

Thanks for the video. What is the new top end for low gear? My pro xp with stock gears can do 40+ mph in low. Obviously it won't go as fast with the new gears so what is your experience? Are the new gears noisy?

Thanks for video helped out a lot by chance do you have the torque or the inner belt housing to motor and to transmission and do I need to line the clutches up in any way working on a 2021 pro xp

@CrashCitySxS

2 жыл бұрын

You’re welcome. The turbo trans inner clutch cover will get everything lined up where it needs to be. No need for an alignment tool. Housing to engine bolts-37ft/lbs Middle housing to engine/trans-50 Upper housing to trans-37

I wish you were closer! Need me some reduction.

@CrashCitySxS

2 жыл бұрын

ROADTRIP!!!

I ruined my drivers rear because of that crap on the axle splines. wish i would have seen this prior. thanks for the knowledge.

@CrashCitySxS

Жыл бұрын

Yup them putting that stuff on there is dumb. I guess to try to quiet down the Polaris popping noises they have?? 🤷‍♂️

Great video, can you give us part numbers for the gears you used? I just want to lower my low range gearing. Thanks!!!

@CrashCitySxS

2 жыл бұрын

3236132 3235232 low gear set.

Nice job!!!! So been thinking about getting a new 4 seater General can you do this to it? Also where you located? Thank you!!

@CrashCitySxS

2 жыл бұрын

Scottsburg IN. Yes! You can do some reduction in a general...

How do you normally get there gear off the one shaft that can't be reached with the puller? I think in this video you use a press but curious what you used to press it off

@CrashCitySxS

6 ай бұрын

Have a hobo freight 20 ton press we use. Gotta get 1/8” plate to get between the bearing and gear and it’ll pop off and outta there

If secondary is spinning in park and neutral and hard to shift do I add shims or remove shims? Clutch alignment looks good

@CrashCitySxS

2 жыл бұрын

Depends on machine…what are you working on

@BradFizer

2 жыл бұрын

@@CrashCitySxS it’s a pro xp but I got it. Added two shims and it’s perfect now. Weird it didn’t need extra shims before the gear reduction

@CrashCitySxS

2 жыл бұрын

Most likely just from having the primary off and not getting it perfectly back on where it came off. No big deal. Just sometimes it happens. Can either tighten primary more or if it was too far in pop it off and put it on with less torque. Or with the new secondary on the pros adjust the shims!

I have a 2021 pro xp 4 and wanting to do this same reduction. What were the part numbers to do this reduction?

@CrashCitySxS

Жыл бұрын

Send us a message on our Facebook page or email us at crashcitysxs@gmail and we can help ya out

For ear reduction parts?

Have you guys done any clutch work on your pro?

@CrashCitySxS

2 жыл бұрын

We’ve helped a few people get their clucthing lined out on the pro

What’s the average time for removal of the transmission, rebuild, and reinstall?

@CrashCitySxS

8 ай бұрын

Bout 3-4 hours for us

What is your personal opinion on doing the 12% reduction across all gears to run 35s on a Pro XP4? No hardcore rock climbing or mudding. Just light to medium trail riding.

@CrashCitySxS

2 жыл бұрын

It would work but would also want to put a high load or big tire clutch kit in it more than likely. But you could try the 12% first and see how it does. Just depends on your driving style!

@kielgloden3183

2 жыл бұрын

@@CrashCitySxS rough estimate to have you guys do the aforementioned gear reduction and install a HD primary?

@CrashCitySxS

2 жыл бұрын

Send us a message on our Fb page or email us at crashcitysxs@gmail.com and we can communicate easier!

@VictorRodriguez-eb4xq

9 ай бұрын

Great video, where are you guys located? If close enough might have to see about bringing mine…

Do you sell a kit or have part #s for the total reduction

@joebonifas9529

Жыл бұрын

For a 22 pro xp 4

@CrashCitySxS

Жыл бұрын

You can use our discount code CRASHCITY5 at www.rockpeakutv.com to get some good pricing on the parts. Send us an email at crashcitysxs@gmail and we’ll figure out what % you want and get you the part numbers to order

Where you at? Ain't seen you in a while! Is all ok?

@CrashCitySxS

2 жыл бұрын

All is ok. Just getting a slow start to the year I guess lol. Got the shop caught up. Getting our rzrs lined out. Should have a vid here in a day or two!

@sxsoutcast7651

2 жыл бұрын

@@CrashCitySxS Can't wait!! Been waiting for that beast rzr and sprinkles to hit the trails...

what do you want for the tires???

@CrashCitySxS

2 жыл бұрын

35 roxxzillas for a 15” wheel are about 1.5” taller than our 14” wheel ones. Got a good deal on them...couldn’t pass em up

If you were to guess...what would you say the comfortable riding speed would be in low on a 2020 rzr xp 1000 if I go with 54% reduction and the top speed in high with a reduction of 27%? Riding on 35" xtr370s...

@CrashCitySxS

Жыл бұрын

15 and 55

@TheMeanderingNomad

Жыл бұрын

@@CrashCitySxS thank you

@CrashCitySxS

Жыл бұрын

You’re welcome

@TheMeanderingNomad

Жыл бұрын

Just following up! I have a 2020 xp1000 I did a 54% reduction in low, 27% in high & reverse as well as upgraded Retainer and double reverse chain. I now can ride up to 25 mph in low maybe 30 tops but that's pushing it. I can get to 60 mph in high possibly 65 mph if I push it...I'm running 32" xtr 370s. I'm happy with this set up. I'll be going 35 xtr370s next so it should run nice. I've got a hunterworks clutch kit with my flywheels weighted to their max. I'm riding pretty good with clutch engagement and rpms. Just letting you know since I inquired about it before I did it! Thank you

Do you work on sxs’s for customers? I’m in Evansville got a pro xp not sure how to get in contact with you don’t have a Facebook but I’ve seen your name everywhere

@CrashCitySxS

Жыл бұрын

You can email us at crashcitysxs@gmail and we can go from there!

What 3 jaw pulled is that? Or where you get it? Thanks

@CrashCitySxS

Жыл бұрын

Just a ole autozone special lol. Thanks for watching

@rawbdiggity

Жыл бұрын

@@CrashCitySxS thanks, hands down best vid on gear reduction. Sub’d

@CrashCitySxS

Жыл бұрын

Thanks for the sub!

Who makes a gear reduction for a maverick x3 2021. I haven't had luck trying g to find anything

@CrashCitySxS

2 жыл бұрын

If you can’t find anything for an x3 there probably isn’t anything available. X3 low gear is good though!

I have 2022 XP pro. Transmission fluid leaking out of the transmission prop shaft seal. I replaced the trip lip seal, but still leaking there. The UTV has 25 miles on it. What could cause this? Thanks

@CrashCitySxS

9 ай бұрын

Are you talking about the output to the driveshaft/prop shaft? There’s the triple lip seal and also a oring on the outer of the snorkel adjuster that the triple lip seal goes in. You will have to pull transmission out and disassemble to change that oring

@nitro1max1

9 ай бұрын

That is the one, thanks for info, not sure what to do at this point.@@CrashCitySxS

@CrashCitySxS

9 ай бұрын

@nitro1max1 get ahold of Polaris customer service and see if they can help out. With only 25 miles it’s clearly a damaged oring from factory

@nitro1max1

9 ай бұрын

One question, do you have to split the case to replace the seal, or can you get the snorkel out from the front where the trip lip seal is? Thanks Again

@CrashCitySxS

9 ай бұрын

@nitro1max1 have to split cases. There’s the pinion shaft that will prevent the output shaft from coming out on its own

I have a 2020 pro xp which Parts do I need?

@CrashCitySxS

Жыл бұрын

Hit us up on Fb or email us at crashcity@gmail and we’ll figure out what’s gonna work best for you

Hi Do you need some great lighting for your car to help you better driving, off-road. We're the pro auto lighting manufacturer for nearly 20 year and we're looking for sponsorship!

@CrashCitySxS

2 жыл бұрын

Yes we’ll take a sponsorship! 1 million dollars and a lifetime supply of Redbulls (regular and sugar free) would be fantastic!!! A new Pro R (well put your lights on it and give it away) a toterhome and huge trailer to travel all over the country too! Shoot us an email at crashcitysxs@gmail.com and we’ll work out the details!

#snizzlefrizzle

@CrashCitySxS

2 жыл бұрын

🤣🤣🤣

35s make you tip over easily

@CrashCitySxS

Жыл бұрын

If you can’t drive lol!