Revit Tutorial (Day 73) - Parametric Corrugated Panel
(Quarantine Day 73)
Today we are going to do a simple exercise and create a parametric corrugated panel.
I did this profile quite randomly, you can make it any shape you like.
Basic steps are:
1. create part of the profile.
2. load it into the host family.
3. make an array with this profile and create a formula to control the array number with the total width.
Done.
Let me know if you have any questions.
Пікірлер: 21
شكرآ لك
Thank you Bin. Another very useful video 😊. Could you tell me how does it turn around corners? And is it possible to split the panel into different heights on top of each other? Many thanks again!!
@BINHE615
2 жыл бұрын
Try Day 219 I think. good luck.
Hello, is it possible to add mullions? It seem to always replace panels
@BINHE615
Жыл бұрын
Yes, you can. This curtain panel will not work if the shape of the panel is not rectangular. It will be replaced by a system panel.
Hi Bin, thanks for the tutorial! How would I create a similar corrugated panel that oscilliates downwards rather than across ? Thanks!
@BINHE615
3 жыл бұрын
I have been waiting for this question since I uploaded that video. :). I’ll have a look tonight.
@BINHE615
3 жыл бұрын
Not too sure what the word oscilliate means... :p do you mean this? kzread.info/dash/bejne/qKKGwcOCmMvNnNY.html
@Cinima00
3 жыл бұрын
@@BINHE615 Sorry if the phrasing was confusing. Basically, a corrugated panel that would look like this exact video's, but it is instead rotated clockwise 90 degrees.
@BINHE615
3 жыл бұрын
@@Cinima00 90degrees? Can you do a sketch if possible?
@Cinima00
3 жыл бұрын
@@BINHE615 here you go :) imgur.com/a/i17Diye
Would it be possible for you to remake this a little slower and with you talking like your newer videos?
@BINHE615
3 жыл бұрын
I'll write it down.
is it coggureated panel can cut opening ? and can calculate area m2 sir ? btw good tutrial sir
@BINHE615
3 жыл бұрын
I believe you can use a face based family (with a void to cut the base) to cut this panel.
@BINHE615
3 жыл бұрын
And for area, you can just create a parameter and use Length*Height as formula.
@I_kiza_real
3 жыл бұрын
Thank you so much for your answer sir, and one question again, can I add a new door automatacily in this wall coggurated wall ? (Have embedded function like curtain wall)
@BINHE615
3 жыл бұрын
@@I_kiza_real You can not place a door in this panel because it is a Generic family. But you can convert this family into a curtain wall panel, and create a curtain wall with it. Then you will be able to add some curtain grids and change the panel into a door. Maybe I can do a quick video to show you how to achieve this.