legend, just helped my troubleshoot my cladding profile. cheers!

Keep up the good work! Nice tutorial!

@DzanTa

5 жыл бұрын

Thank you!

Thank you for this!

@DzanTa

6 жыл бұрын

Klemen Potnik You are welcome. Please let others know so they can benefit as well.

Very well done!

@DzanTa

6 жыл бұрын

JonathanLight1 Thank you!

I tried to draw this but the sheet in horizontal position and I get error I think I will have to draw again

kk thank you very sir,Gods grace i will waits tomorrow..

Try offsetting the profile in autocad to get the correct gauge of the sheet. You can't draw a line that is 1/64" long in Revit.

Any way to edit the profile of the wall when complete? or "attach top/base" I am getting an error when I try to make the wall profile work without a perfect rectangle?

@DzanTa

5 жыл бұрын

Edit Profile on a wall should work unless the curtain wall spacing is messing things up. Attach Top/Base should work too. I would need to look at the file you made. Get with me tomorrow (Thursday)

Hi! Thanks you alot for this information. I have another question to do. It can change the color of the curtain wall? (sorry for bad english, not main lenguage)

@DzanTa

5 жыл бұрын

The material of the panels and mullions can be changed in the Property window.

Great video, can you use this method to create horizontal panels. I created the extrusion on the left view, but when i add panel to storefront it doesnt repeat vertically. It is only 8' tall

@DzanTa

2 жыл бұрын

I donnot think you can. You may have to use an adaptive curtain panel family

can you use this on a vertically curved wall by making it as a mass ?

@DzanTa

5 жыл бұрын

In this case no. You will have to use an adaptive curtain panel family on a divided surface such as rhomboid. Use the conceptual massing environment.

Hi Dzan Thank you for your video. I have tried to make a metal panel but I keep getting errors when I try and use it in my project. Is there a chance that you could look at it for me? Thank you Tony

@DzanTa

4 жыл бұрын

Sure. I can help u in a few hours...

Does this only work in revit 2019 and later I followed this step by step in 2017 and only get errrors when i try it

@DzanTa

5 жыл бұрын

It should work in older versions too. What errors pop up?

I've actually learned that if you're offsetting and trying to tab in to select all lines and it's not working you can off click once then tab in and it'll work for ya.

Thanks for the video! I need to edit the profile of the curtain wall to a round shape. When I edit it, the panels that are being affected by the profile, Revit is automatically changing them to Glazed panels and it is not letting me use the corrugated panels. Any thoughts on how can I resolve this problem?

@DzanTa

3 жыл бұрын

not sure what you mean by round shape....custom profiles for curtain panels need to be simple with not too many complex curves...otherwise, it defaults back to glazed panel. Hope this helps

@adrilemmen

3 жыл бұрын

@@DzanTa Thank you for your prompt reply. It is also happening when I put a wall opening. I have my curtain wall set it up with my vertical grid spacing at a 3' fixed distance and my horizontal grid at 20', that is the actual panel size given by the manufacturer. When I make a wall opening for my 7' high door there is reaming 2' panel. This 2' panel is the one that Revit is changing to the glazed panel instead of the corrugated panel.

@DzanTa

3 жыл бұрын

@@adrilemmen you may have to delete the panel and recreate it custom. Hard to diagnose.

Gracias!

@DzanTa

4 жыл бұрын

De nada

Hi Dzan, thanks for video. I am having an issue getting the corrugated part of the panel to repeat. I get two section of corrugated panel with a big stretch of flat space that grows with the size of the wall.

@DzanTa

3 жыл бұрын

That happens sometimes. It is due to the amount of bends. Make a profile that has less bends for the panel or make a bend as a mullion profile and repeat the mullion instead of the panels.

@davinhartley6099

3 жыл бұрын

Thanks Dzan, I'm have issues with door and window openings not aligning properly. Is there another way to create a corrugated metal panel using a sweep method but have the sweep run vertically and then repeat horizontally?

@DzanTa

3 жыл бұрын

@@davinhartley6099 try using a beam system where the reference plane is set to vertical. You can also try to create a custom in-place family and array it.

I've comeback to this 3 times and have gone thru it step by step. Every time i get to the part of loading in the metal wall panel it loads into new file but half the panel drawn is corrugated and the other half is just a smooth wall. Am i not locking something correctly making the metal wall family?

@DzanTa

5 жыл бұрын

probably....I would need to see your file or see what you are doing.

@reddrhino63

5 жыл бұрын

4th try was successful! Turns out under properties for my modified curtain wall I changed the max spacing to be 4ft like the panel width was and that resolved it. Now to cut out openings is my next step. Thanks again! :) Dzan Ta

Hi Dzan, i keep getting error "cannot sweep" "no good view could be found"

@DzanTa

4 жыл бұрын

I would check profile sketch and path again

please are good in revit structures

Hi! I am getting an Error - can't create sweep message and I can't figure out why. I figured it probably has something to do with how I've drawn my profile, but I've messed around with it a few times now and still no luck. Any suggestions? Thank you!

@natashayaworsky7565

3 жыл бұрын

Never mind I figured it out! I think it had too many segments so I just did fewer repetitions of the corrugation.

@DzanTa

3 жыл бұрын

Try keeping the sketch of the profile simple and lock the lines to the correct reference planes

For some reason my panel is not extending up and down any suggestion ?

@DzanTa

4 жыл бұрын

Make sure you magenta line sketches are aligned and locked to the reference planes

Can we use same family as roof type or just use it like wall type???

@DzanTa

2 жыл бұрын

You can use it as a sloped glazing type where the panels are using the corrugated profiles

Can you tell me why my pattern will not repeat. I can only draw the pattern the length of the pattern then it just stretches the pattern.

@DzanTa

3 жыл бұрын

You probably need to constrain it better

can you apply this to a curved canopy?

@DzanTa

2 жыл бұрын

I would use Roof by Extrusion command

I can attached to a roof with slope, always change the panel for a glass panel after attaching. Any help please

@DzanTa

5 жыл бұрын

you will need to use an adaptive curtain panel for the panels that are not working. This is a bit harder to accomplish.

@biswarupmondal5778

4 жыл бұрын

@@DzanTa Sir I think It;s possible without Adaptive Curtain Panel

@DzanTa

4 жыл бұрын

@@biswarupmondal5778 send me your model so I can help you after lunch

@DzanTa

4 жыл бұрын

Dzanta@gmail.com

@biswarupmondal5778

4 жыл бұрын

@@DzanTa sir if you use the mullion profile like as the curtain panel profile then it's possible. also i am sending my sample file where you can see also a corrugated sheet Gable Roof. Thanks

it not work with me in revit 2017 how is this possible...or else i need revit 2019

@DzanTa

5 жыл бұрын

it should work in 2017...this is just making a custom family. the principles apply to the family, not the version of the software. If you can send me a video of what you are doing, I can better understand where it isn't working for you.

Hi I am keep getting error (There is no open view that shows any of the highlighted elements. searching through the closed views to find a good view could take a long time.)

@DzanTa

4 жыл бұрын

I would start by closing the file first. Then opening it to 1 view. Then do whatever sequence of events you performed to see if you get the same error. Is the error occurring when you are in family making adjustments are when you are loading it into a Project file?

As stated below I followed this several times and keep getting an error message...can you help with this, I also emailed you can you help

@DzanTa

4 жыл бұрын

Check email response

@DzanTa

4 жыл бұрын

I looked at your family. Instead of creating a profile with a lot of s curves and making a panel that repeats....do this instead: Create a profile sketch of just 1 s curve as a Mullion Profile. Then load this into the Project. Use the Properties to swap out the mullion profile with your custom one. Then make sure the repeating distance is only the length of 1 s curve distance. I hope this helps.

This is beautiful, thanks for the tutorial. But using this system it's not possible to cut holes/create different openings shapes on it for doors, windows and etc, therefore, it becomes pretty much useless.

@DzanTa

Жыл бұрын

Actually, if you create this panel as a custom vertical wall, you can host a door or window in it. You can also use the wall opening command or face based opening command to make holes. Since it's a wall, you should be able to Edit Profile too.

is it can fill with door or window (automaticly cut wall0) sir ? tkyu

@DzanTa

4 жыл бұрын

A Curtain Wall has a properly called Automatically Embed. If this feature is checked, the curtain wall will be hosted by the wall you draw it in. If you are talking about a door, you can load in a curtain panel door and then select a panel to switch it to the curtain wall door.

@I_kiza_real

4 жыл бұрын

@@DzanTa tkyu sir, but my door is from metal rolling door because I use this coggurated for my factory design, when i created a hole from "opening wall" in revit is success 90% the rest is failed because the coggurated wall become a glass again. Can you have the solution sir? Tkyu

@DzanTa

4 жыл бұрын

@@I_kiza_real If your door is a typical door that is hosted by a wall, you can switch your panel out to a wall. Then, insert your rolling door into that wall so it will be hosted by that wall within the panel within the curtain wall.

Good Day, I Have Repeated The Procedure For More That 3 Times, I Keep Getting Error.

@DzanTa

4 жыл бұрын

I can help you in about 2 hrs. What error do you get?

hi, good video but i have a problem when i try to load the metal panel mafily to the generic model i get an error that there is no loops. what do you think about that!

@DzanTa

4 жыл бұрын

Check your profile sketch and ensure it isn't too complex as well as a closed loop sketch. I can help you tomorrow between class breaks...

@ilyassfrikech1450

4 жыл бұрын

@@DzanTa I will be very grateful if you can help me in this. I tried everything but all in vain

@DzanTa

4 жыл бұрын

@@ilyassfrikech1450 I can help you in about an hour...

@ilyassfrikech1450

4 жыл бұрын

Dzan Ta ok, thank you I ll be here waiting

@DzanTa

4 жыл бұрын

@@ilyassfrikech1450 i am ready. What is your phone number

please can you also help me with ridge cap ,how to make ridge cap

@DzanTa

6 жыл бұрын

george alhassan Send me a picture of what you are wanting

@DzanTa

6 жыл бұрын

george alhassan Do you mean an angled ridge vent family that goes oner the top of the ridge of a roof?...if so, i made one already and will send tomorrow morning

How do you add windows or doors

@DzanTa

3 жыл бұрын

With this method you cannot add in normally. If you create it as an in place wall family, then you can insert doors and windows

Can I use this as a roof?

@DzanTa

3 жыл бұрын

Yes

Please make a video about how to make Spanish tile roof with curtain wall or beam system method(I know Mass method but sow heavy)

@DzanTa

3 жыл бұрын

I will do asap...probably next week sometime

@babakmb1738

3 жыл бұрын

@@DzanTa so thanks🌹

@DzanTa

3 жыл бұрын

hi....I just uploaded a video for you based on your request... kzread.info/dash/bejne/qqqT3K6ulJXMnrQ.html

I tried this and I keep getting an error message, "Can't make type "Test Curtain Panel 1"."

@DzanTa

5 жыл бұрын

You may need to redraw your profile sketch

@victoriaunruh5761

5 жыл бұрын

@@DzanTa Thank you for the quick reply, I've tried redrawing my profile sketch and it didn't change the issue. I'm able to make the metal panel family, I can load it into my Revit project, but when I try to change the curtain panel to my new profile, that's when I get that error message.

@DzanTa

5 жыл бұрын

@@victoriaunruh5761 the curtain panel in the project may be drawn such that it cannot accommodate the number of panels and spacing...try redrawing the host curtain panel as a simple straight wall, then a curved wall, then a wall with multiple curves of varying radii to test your custom panel.

thank you very much sir

@DzanTa

6 жыл бұрын

george alhassan No problem. Let others know too

Hi Dzan Ta would you mind checking my Revit project that I have mailed to you? many thanks. experiencing some problems and I believe it's due to alignment and locking incorrectly.

@DzanTa

4 жыл бұрын

Ok. Will do and let you know asap

Can I download this anywhere?

@DzanTa

3 жыл бұрын

I don't have the file anymore...sorry.

i mean gable roof ridge cap

Doesn't want to work, it keeps saying "cant make type "metal sheet"" i don't know where i could be going wrong.

@DzanTa

4 жыл бұрын

I can help you tomorrow morning

@tobi_ffs

4 жыл бұрын

Dzan Ta Thanks alot! I can't wait.. 🙌

@DzanTa

4 жыл бұрын

@@tobi_ffs HI....I am available now to help you....

@tobi_ffs

4 жыл бұрын

Dzan Ta How can i send my files for you to check out?

@DzanTa

4 жыл бұрын

@@tobi_ffs dzanta@gmail.com

cant get it to work on REVIT 2020. can I get the family file?

@DzanTa

3 жыл бұрын

What is your email address so I can send you the file?

@kirkhood4041

3 жыл бұрын

@@DzanTa dead_666@live.com

@DzanTa

3 жыл бұрын

@@kirkhood4041 ok. Will send asap

@kirkhood4041

3 жыл бұрын

@@DzanTa thanks a lot. is it possible to edit the profile?

@DzanTa

3 жыл бұрын

@@kirkhood4041 yes. Look for it in the list of families in the Project Browser

How can I make this a roof sheet? TIA

@DzanTa

9 ай бұрын

Use the roof type that is called roof glazing.

@DzanTa

9 ай бұрын

kzread.info/dash/bejne/oHtrlMSSeqqxlrQ.htmlsi=Doo6U9TxMH8c3Ad7

@beauruutz

9 ай бұрын

Thank you so much!! I've been sitting at my pc for about 6 hours trying to figure it out...@@DzanTa

I do not know what happens but following all the steps does not make the curtain wall like in the video.

@DzanTa

5 жыл бұрын

do you need me to remote into your system to help you?

@igorfodel9641

5 жыл бұрын

@@DzanTa if u want i can send u the file and maybe you can see what is wrong... I cant see it..

@DzanTa

5 жыл бұрын

@@igorfodel9641 ok....dzanta@gmail.com I will look at it in the morning and resolve

Can I get this panel? have a link to the RVT file?

@DzanTa

5 жыл бұрын

I will give link tonight

@DzanTa

5 жыл бұрын

sorry....I looked everywhere...I don't have the Revit family anymore. I have only the mp4 video I made to upload to KZread. If I have time, I will make it again tomorrow or Thursday to upload to my Dropbox and send you a link then.

@DzanTa

5 жыл бұрын

here you go.... www.dropbox.com/sh/w0ao8v5lezxswg0/AAA3iMcPdJ2Bj_ZFl1Gj5gXga?dl=0

@DzanTa

5 жыл бұрын

here you go.... www.dropbox.com/sh/w0ao8v5lezxswg0/AAA3iMcPdJ2Bj_ZFl1Gj5gXga?dl=0

I tried your tutorial so that I can make a roof out of it but I can't make this work. I must be doing something wrong but I don't know what... great tutorial though.

@DzanTa

4 жыл бұрын

Once you make the custom panel, create a roof using the sloped glazing roof and switch out your default panel to the custom one in Type Properties

@grimmsdottir5993

4 жыл бұрын

Thank you, I did that and it worked ! But now it appears glazed while I put the parameter so it looks full. No matter what I do it only appears in a weird transluscent purple in the project... 🤨

@DzanTa

4 жыл бұрын

@@grimmsdottir5993 Open up the custom curtain panel family you made. select the geometry. assign it a material in the Properties. Save and reload into project.

@grimmsdottir5993

4 жыл бұрын

Dzan Ta Thank you, it worked just well 😊

Is there a way to just download it? Pleaaaaaase

@DzanTa

3 жыл бұрын

I am in class all day. I will try to find my family file and send to your email address....what is your email address?

@carepointglobal1356

3 жыл бұрын

@@DzanTa h.saad@consultant.com

@kirkhood4041

3 жыл бұрын

@@carepointglobal1356 can i get this file also. keep getting errors.

I REALLY LIKE THIS VIDEO EXCEPT I GOT LOST WHEN YOU FINISHED THE FAMILY PANEL AND YOU DIDN'T SHOW US HOW TO APPLY IT ON A WALL OR ROOF

@DzanTa

3 жыл бұрын

This video was meant to show you one way of making a panel. There is another video on my site showing how to use it for walls, roofs, etc....

When you guys make these videos it would be helpful to load it and use it in a model as a demo and show how it interfaces with a sloped roof above and window openings. The problem with using curtain walls as the motif is that this family wont attach to the underside of an angled roof and it also doesn't like clipping for windows..doors yes but not windows.

@DzanTa

Жыл бұрын

Curtain walls can attach to the top of a roof. You might have to edit profile to make it work. Panels can be swapped for panel doors. Or, you can swap a panel for a wall and insert a door in that wall. I have another video that shows the application of it...just dig into my channel. You'll find it.

The wall I created works well up to 5 feet wide. longer than that it stretches normal wall then it repeats the pattern after 10 feet. So what I have is 5 feet wide of the corrugated wall then about 10 feet flat, then 5 feet corrugated again. There is NO loop ? Her is how it looks : i67.tinypic.com/1znqsfb.jpg

@DzanTa

5 жыл бұрын

Check your sketch to ensure the profile is aligned, dimensioned and locked properly. What is the realistic width size of the manufactured panel? Use the vertical spacing property to control this width. Theoretically we should be able to make a single giant panel using your custom profile swap such as in the Curtain Wall 1 type. Send me your profile sketch so I can play with it. Dzanta@gmail.com

Can't draw sweep on mine.

@DzanTa

4 жыл бұрын

Ensure your sweep profile isn't too complicated

@aint_just_a_support5780

4 жыл бұрын

I want to use it for my roof...

@DzanTa

4 жыл бұрын

@@aint_just_a_support5780 create the profile as a custom curtain panel, load I to project, create roof using slope glazing system family and swap curtain panel definition.

ALso you can't add windows or doors.

Nathan Solarino...please email your comment to me....KZread comment is cut off and I can't read it to help you. dzanta@gmail.com

Nope. Cant create sweep. Error cannot be ignored. Followed this video to the letter at least 10 times in Revit 2021.

@DzanTa

3 жыл бұрын

I have time on Wednesday if you need help...kinda booked up until then

@williambolton4698

3 жыл бұрын

@@DzanTa That is very kind and generous. I'm tied up at work on Wednesday but I am genuinely grateful for your offer.