You're always a great tutor to me and a great friend to all that teaches each and every shortcuts in revit

Awesome! Right timing. I'm working on a project with shipping containers right now

It's incredible the huge range of topics about Revit in your channel !!Many times I was asking "how could I do that?" "is it possible to do this?" Thank you !

I did it with a mullion profile and it went well, thanks for teaching that other method :)

I’ve done a similar thing with timber boarding but used a nested array family in a curtain panel family….mainly to avoid all the mullion grids you get with an array. It works really well and is easy to cut or swap out for something else. The downside is you need to use masses to cut anything not square.

Thanks you for your advice

Thank you so much sir

king of revit!

I tried this same method, but with component: extrusions. But his solution seems better, thanks for the video!

Thank You

Yeah We also Tried this and Found 3types to do.. All worked.. Beam System Mullion and Other one..

Super excellent

thank you

Nice

Your content is great! The volume is incredible. This is an example however of overmodelling. Unless you are a cladding subtrade, this should just be a layer in your basic wall assembly. these flutes would only need to be depicted at 1:5 so it's good to know the capabilities of the tools, but like a sage bloke once told me, 'just because you can, doesn't mean you should'. Cheers people, we do BIM in 🇨🇦 too eh!

@TravisVanClieafBIM

3 жыл бұрын

Apologies...sorry...I should add, if you're working on a little project and you get to make design designs...add these to a basic wall as a sweep and then openings aren't an issue. However, you can only do this for vertically applied cladding, which is the only way it should be used. Sorry...in my humble opinion. 😆

@AussieBIMGuru

3 жыл бұрын

@@TravisVanClieafBIM that's my take too. No need to apologize haha (I know it's in the friendly nature of canadians to though!)

It was really a nice video, what if we use void for cutting the window and door place.

Danke

Thanks for your video it was very helpful. I was wondering if you could help resolve the issue of angled walls where the sheeting disappears as Revit cannot resolve the roof slope? In other words the top of the profile (cladding) is horizontal and cannot follow the slope of the roof so Revit replaces it with a standard "solid panel".

Cool

Great video, Can these panels be used going horizontally?

Hi! Your video is extremely helpful so thanks for sharing. Also, I'm trying to apply your method to sheet piles, yet the last element is overlapping. The fixed distance is 1200mm and when the wall length is not a multiple of 1200, this overlapping is happening. I've tried different ways to try and work around this and nothing seems to work. Your suggestion would be much appreciated. Thank you in advance.

It is better to create a family with an array. This way you can count how many sheets you put in the project. Also, you can create a set of parameters that will check the lenght of the wall and divide by the sheet width, giving you the count as well

@Detteermiig

2 жыл бұрын

Please elaborate, can you link to a tutorial or perhaps a family that you created already? Is it still easy to create openings for windows and attach it to the roof for automatic cuts?

Muito obrigada!!

I have a problem with this, once family is loaded into project the wall is invisible can you help please?some really great content here thanks.

Can you do it also with sweeps or reveals?

At 4:25, u move the thingy a little bit to the left using shortcuts. Can u tell me which ones pls? :)

When I try to do it as shown, there is gaps in between the panels of the finished wall. Any fix for this?

I noticed the offset size was 3.0mm. Is this to avoid the 0.75mm minimum length limitation in Revit?

How to create same profile in roof slab let me know

HELLO, I TRIED THIS FAMILY AND WORKING WILL, BUT THE PROBLEM IS THAT IF I WANT TO MODIFY THE PROFIL TO BE INCLIN FOR INSTANCE OR AD SOME OPENING FOR THE WALL THEN THE FAMILY CORRUPTED AND FAILED TO LOAD THE PROFILE. CAN WE FIX THIS

How to Color it with 2types of material.. Like alternative one?

use wall profiles instead. Create a profile Family. Load into project. Wall Profile. new type. use the Profile. Check the cut opening option, and you can even create special profiles for the corners. The only disadvantage is that you will have to copy the Wall Profile multiple times but you can use "Array" for that puropse

@balkanarchitect

3 жыл бұрын

Hi, yes I explored that option as well, that approach gives you easy openings but is harder to place, because you have to copy the profile and the approach in the video is much quicker to place but takes more time to make openings. I guess everyone has to choose what works better for them 🙂

@Detteermiig

2 жыл бұрын

Would you use 4 profiles if you want battens, cross battens and board on board?

There was an error occur when applied to non rectangular roofs. Is there any solution..?

Ist it possible top cut the last segment?

Hi I cant make the wall attached to the roof. Need some help.

I'm not getting the profile name in curtain panel option.

Puedes hacer esos muros con reveals y poder usar el poder de union de puertas y ventanas de los muros

Esa familia puede ser usada el el techo ?

I tried but doesn’t work there are spaces between the elements. Can you help me ?

How is your line thickness so less?

How is your line thickness so thin.

How to made comercial shop shutter..?

Great video! I only have one problem. When I try to attach the curtain wall to a sloped roof it shows an error and replaces the curtain wall saying "Can't make type Metal Sheet Cladding Profile" and then "Missing Curtain Panels will be replaced with System Panels to complete command" Do you know how can I fix that? Thanks!!

@HenryMidfields

2 жыл бұрын

I'm having a similar problem as well. Are there settings in the exterior glazings or save file paths that I need to follow? EDIT: I checked the instructions from 5:50. So I needed to lock the extrusion edges to both the top and bottom reference lines to resolve the "Can't make type Metal Sheet Cladding Profile". Would that answer your question?

How can I make sandwich panel in revit

Any Solutions for raking custom panels? ive made void extrusions to cut in family but its not working?

@alexisvonhardenberg8803

2 жыл бұрын

Can't cut with void families, but you can cut with solid families, however you will need to cut each panel individually..

Impractical

could you make video about create one schedule to sort and calculate column's length and beam's cut length ? the section is the same size. thank you

@cxp5851

3 жыл бұрын

i created construction frames in revit , i tried using all the beam to create, but i must pull every beam's handle to control the ending, if using columns for vertical beams for horizon then its very quick, its automatically control the ending. i want to create one schedule like one schedule of structural frame

Hi! Great tutorial! is there a way to make the panel horizontally? Thank you!!

@andyl1042

2 жыл бұрын

if you want walls with horizontal profiles you can do that in the standard Wall Family editor - this may be useful kzread.info/dash/bejne/hXymlKN9p9XKpNo.html

@compadrelucas

2 жыл бұрын

for horizontal you can use a profile to be swept on the wall when you make a wall type. although, it is excessively heavy on geometry and should not be used on bigger models

Thanks , from Iraq country

how to make a cooled room sandwich panel like brick wall

if I am not mistaken, if you "join" the wall and cladding the door opening will automatically cut through the cladding.

@I_kiza_real

3 жыл бұрын

Realy? Are you has been try it?

@3-body-problem

2 жыл бұрын

I believe you cannot join disimilar elements. Can only join floor with floor, wall with wall etc...

But when I attach it to the roof - it's not working - gets deleted

how to put LOGO on this corrugated sheet

i can imagine these elements take quite a bit of CPU power to render

I think a solution for that window fixing problem is that first we make a generic wall and fix window. And after that we select that wall and convert it into our designed wall. A temporary solution

@andreassandmo1

2 жыл бұрын

How can you convert a generic wall with windows into a curtain wall?

So i wanna do the same but on top i needed to be attached to a roof that has a slope. And when i do the attach it replaces the panel with empty or glazed ones. Anyone knows how can i avoid that from happening?

@enmanuelespinal1993

3 жыл бұрын

kzread.info/dash/bejne/eZOYrLiye5uXetI.html

@alexisvonhardenberg8803

2 жыл бұрын

You can cut any shape you need with a solid in place family and then hide the cut shape in your views or give it a visibility parameter that you can turn on off. however you will need to cut each panel individually.

hello, i've been stuck on this for a while because no matter what i do i keep getting the error messsage Changes have been made that cause a curtain wall with type driven grid lines to exceed the maximum allowed number of type driven lines (200 in direction (1) and 200 in direction (2)). If you really need this many type driven grid lines, please split the affected wall before proceeding. . how can i get past this? thank you!

@justinvanzyl8175

2 жыл бұрын

Did you ever fix this issue? I am having the same problem now

@zuhaltarak

Жыл бұрын

@@justinvanzyl8175 did any of you fix this issue? :)

For a visual approach is ok but in a large scale project a think it would be a very time consuming try to deal with the openings issues, in the work we do that whenever we want to show a 3d detail view in sheets but never in the entire buliding not to mention that in the sheets that representation use to look awful in a large scale views mainly

@3-body-problem

2 жыл бұрын

That sounds like the way to do it. Create a zoomed in 3D view of a specific corner of the building (maybe entrance) and clad just that small region for the sake of rendering presentation.

HI SIR CAN YOU HELP TO LEARN REVIT

So what's the fun using revit and doing all manual , creating the metal sheets and then modeling the wall behind the cladding , again making openings manual !! Supose u have a huge facade r u going to do it one by one 😟I dont wanna mention any other bim software her , but really is this the right method , i have seen other great method in another software u will just have to select the product from bimobject and then apply it on the " walls " not the opposite . And it will just cut all the openings automatically .

@AussieBIMGuru

3 жыл бұрын

Usually we just use surface material on an equivalent layer thickness with a good texture map. Modelling corrugation is a waste of time and pc memory.

@faresjawad3096

3 жыл бұрын

@@AussieBIMGuru u dont have to model it in Archicad for example u just apply it from bimobject website with a proper thickness and cuts all openings no waste of PC memory .

@AussieBIMGuru

3 жыл бұрын

@@faresjawad3096 it's a waste of memory for the PC to have to render the shadows and detail. If people want to do it that's fine but I don't see the point unless it's super small project scale.

@faresjawad3096

3 жыл бұрын

@@AussieBIMGuru I think it will help u in archtecural coordination the thickness of the cladding might hit a drainage pipe and if u put just a texture u wont feel it or c it .

@AussieBIMGuru

3 жыл бұрын

@@faresjawad3096 but if you make the layer the same depth you would. I only think it matters if the corrugation has a design intent, e.g. running pipes between a wide sheeting tray.

"Changes have been made that cause a curtain wall with type driven grid lines to exceed the maximum allowed number of type driven lines (200 in direction (1) and 200 in direction (2)). If you really need this many type driven grid lines, please split the affected wall before proceeding." can someone help me with this comment?

Do you ever use archicad?

@faresjawad3096

3 жыл бұрын

I was wondering Because in Archicad u can do this in one click and it will cut the openings automatically .

@faresjawad3096

3 жыл бұрын

I was wondering Because in Archicad u can do this in one click and it will cut the openings automatically .

@mosholombi

3 жыл бұрын

@@faresjawad3096 thats true...so fast

Its easier to just model the cladding in as a model in place wall, you can join to other walls and the door and window openings are automatically cut out.

How to make easy things complicated = Revit

@syedyousuf95

Жыл бұрын

Which is easy software?

Hey Balkan ,thanks again , I WOULD like to know please, is it possible to sub to your patreon as a level "x" then change the level later , like for eg if I start this month with 5 dollars then I'm planning the next month to go for the 30 dollars level ,is it possible to change ?

@balkanarchitect

3 жыл бұрын

Yes! You can change or cancel at any time 🙂

@zatlanibrahim5438

3 жыл бұрын

@@balkanarchitect thx

Wouldn't it be easier to just find a corrugated steel texture on Google, make a new material, and insert that material as the new finish for the wall? That's what I did. It took like 6-7 minutes, and you keep that wall forever in your template. It will also work great with openings/doors/windows/etc.

@balkanarchitect

3 жыл бұрын

Yes but in floor plan view you will not have accurate representation and renderings will look much less realistic 🙂

@shane250

3 жыл бұрын

@@balkanarchitect Thanks for the info. I render on Twinmotion (Free, faster, and more realistic). It imports and auto-updates from the Revit file if you get the free extension.

@balkanarchitect

3 жыл бұрын

I know, I'm planning some tutorials on twinmotion in the future! 🙂

@shane250

3 жыл бұрын

@@balkanarchitect YESSSSS!!! I'd love to see those! Damn...Is there anything you can't do???

@mosholombi

3 жыл бұрын

@@balkanarchitect Thnx...cant wait for that

Let's not include a way to make steel clading in an architectural software... they will problably figure something out... Autodesk...👎