Restoration Curved Dagger of ARTILLERYMAN - MODEL of 1907
Тәжірибелік нұсқаулар және стиль
Hi! Today, the restoration of the curved dagger of the Bebut artillerymans. Sample of 1907. This dagger was produced in 1915, at the Zlatoust arms factory. The condition of the dagger is bad. There are no accessories for the handle and scabbard. Also, the length of the blade is missing about ~ 5-8 cm. Well, let's start the restore.
The first step is the disassembly of the dagger. Next, clean the blade from rust with a tool. After inspection of the surface of the blade, I found that it was badly corroded. It was decided to lightly sand the blade with sandpaper.
The stamps on the blade have been preserved and they are readable.
The wood scabbard of Bebut dagger turned out to be shortened, like the blade itself. They were covered with modern leather and modern glue. I completely cleaned the scabbard, sanded it further, primed it, sanded it, and so I came step by step closer to the fact that they became strong.
I made new fittings and pins for the dagger handle. In the same way, I made new fittings for the scabbard out of brass. As usual, I made a test for you. Please don't forget to share this video.
Sincerely, Alex. Thanks for attention!
Good luck and health to everyone! With best wishes, Alex!
Please subscribe to my channel: @ScrewsAndTools
🍖 My New Cooking channel! @screwsandtoolscooking
Patreon: / screwsandtools
Paypal: paypal.me/screwsandtools
Facebook: / scresandtools
Instagram: / screwsandtools
#screwsandtools #dagger #restoration
Пікірлер: 279
Часто смотрю видеоролики этого мастера! Браво! 🫡🫡🫡 Снимаю шляпу! ! ! ! ! ! Великолепен! ! ! ! ! ! !
@ScrewsAndTools
11 сағат бұрын
Спасибо, но я всего лишь учусь, далеко до мастера)
Доброго времени суток, Алекс! Бебут попался в относительно хорошем состоянии, даже ножны и рукоять новые не пришлось делать. Особенно понравилась форма стаканчика ножен! Спасибо за очередное отличное видео! 👍
@ScrewsAndTools
7 күн бұрын
Спасибо!!
@oleg_konovalov
7 күн бұрын
@@ScrewsAndTools 🤝
Бебут обрёл вторую жизнь, это классика и куча лайков. БИБИП в конце это здорово.
Оригинальная получилась рукоять, со следами окислов меди!!👍👍👍
@ScrewsAndTools
10 күн бұрын
Я сперва переживал, а шлифовать грубой наждачкой не хотел - а следы отобразились под конец очень натруально.
Алекс, работа как всегда, на высоте!!! Бебут получил вторую жизнь!!!
I thought the handle was ruined by the wire but it resulted in an interesting effect when removed and sanded smooth. This one really came together nicely!
@ScrewsAndTools
7 күн бұрын
Yes, it was so unexpected and pleasant to get a natural beautiful effect
Инструменты вашей мастерской становятся все лучше и лучше, отлично!
Алекс, спасибо за удовольствие наблюдать вашу работу! Ждем продолжения!
@ScrewsAndTools
9 күн бұрын
Благодарю!
I think the true star of this video is the scabbard. You went above and beyond to save it, instead of making a new one. And I always enjoy watching your brass work 😄. 👏Bravo👏. ✨️🗡✨️👍 P.S. I just added an antique U.S. Model 1840 NCO sword to my collection. It's in fair condition, and the blade sings 🎶 when struck. I love it 😊. P.S.S. I ordered my own tiny anvil!
@ScrewsAndTools
7 күн бұрын
I am happy for you, congratulations on your new acquisitions! By the way, you can always share photos in the Instagram direct, I'm interested. Thanks for your attention
Симпатичный экземпляр получился. Лайк.
Привет Алекс. Мне нравится как ты решаешь вопросы с реставрацией 😊
Nice that were able to save the scales and some of the sheath. Great work and your additions were perfect. I am disappointed there was no cutting of meat and vegetables, I was looking forward to lunch.
@chrisbailey5955
9 күн бұрын
😢😢
Beautiful work. And the tea slurp was great too.
I love your work. This turned out especially nice. I like how you save what you can of the original.
@ScrewsAndTools
10 күн бұрын
Thanks for feedback!
@markfergerson2145
9 күн бұрын
That seems to be his trademark so to speak, keeping as much as possible of an original while fabricating only what is necessary. His fabricated parts, Ike the brass on the scabbard and the caps on the scales screws, are always in keeping with tradition. I must also say that his brass fabrication skills have improved greatly since I began watching his videos.
Как всегда бережное и аккуратное отношение к истории.И отличная работа!!!
@ScrewsAndTools
6 күн бұрын
Благодарю!
Another wonderfully done restoration. Dankeschoen.
Amazing work bringing that handle back
Шикарный каманный бебут!
Another beautiful restoration! Thanks for sharing it with us
Most impressive ..like the ageing effect on the brass work.
Отличное видео и отличный результат!) Как всегда, интересно! Спасибо!
Can't believe I've never said thus before but I love the "the rest is history" jar
Хорошая работа вышла
One of your best pieces of work. Always enjoyable to watch you create and restore.
@ScrewsAndTools
9 күн бұрын
Thnka you!
Отличная работа!
Мастер прямо таки вышел на новый уровень, поздравляю. И "котэ" на занавеске с нами. 👍
Another Masterpiece Bravo! ❤
Awesome restoration, my friend! Don't stop. I love you channel ❤
Mr. Alex, sir, you did a wonderful job in restoring this blade. I really appreciate the fact you did not speak badly of the person who tried to repair it themselves, whomever they may be. In truth, I thought the scabbard and scales would be very difficult to restore yet they came out beautifully. Perhaps one day you coud do a step by step tutorial on how to make a snug fitting scabbard for a blade? Especially since you do not use anything that is beyond the means of a general hobby person or someone who wishes to be self reliant. Take care, enjoy delicious tea, cook up a good meal, take time out with family, and bibip.
@ScrewsAndTools
7 күн бұрын
Hi! Thank you more for your attention and interest. As for the scabbard, at this stage I don't plan to shoot very detailed videos because I don't have free time. At this stage, there is such a lesson on how to make a scabbard.Sure, If you are very interested and need this - (www.patreon.com/Screwsandtools/shop/how-to-make-scabbard-for-caucasian-type-40108?Link&)
Браво мастеру! 👏👍🔥
Very very beautiful restoration ❤
Nice job as always Alex you never cease to amaze us all
Beautiful work
Such a great restoration as always 👍👍
Серпянка хороший ход. Тоже ее часто применяю для армирования поверхностей.
Beautiful job Alex, it looks great! Always enjoy your videos!
I am very glad the scabbard was able to be striped and saved. I am also glad they wired the handle instead of ruining the chances of someone knowledgeable being able to fix and restore it. Job well done! BEEP BEEP!
It is amazing to see you work with those very interesting blades. Thank you for sharing!
@ScrewsAndTools
5 күн бұрын
Thank you!
Bene spacca e taglia tutto sei un 👌Gueriero
Спасибо, Алекс!!!!
Отлично получилось👍👍👍👍👍👍👍👍
The jar should say "The rust is history"
GREAT JOB MY MAN ! YOU ARE THE MAN !
Definitely one of the better ones you have produced, well done 👍
@ScrewsAndTools
9 күн бұрын
Thank you!
Алекс реставрация на качественном уровне. Но ножны это другая история, здорово и красиво получаются. Спасибо за видос, лайкаю.
@ScrewsAndTools
9 күн бұрын
Спасибо за отзыв
What a transformation great job.
Алекс привет. Ну, что тут скажешь 😏 всё просто замечательно получилось 👍 И следы от проволоки на рукояти даже смотрятся отлично😁 хорошо, что не убрал. 👍👍👍🤝🤝
@ScrewsAndTools
7 күн бұрын
Да такой приятный след остался я даже не ожидал))
Клёвый бебут 🤙
@ScrewsAndTools
10 күн бұрын
У меня их уже два с половиной)
Tremendous work as usual! Your videos are so much fun to watch too! 😊
Вот зацепило как ножны восстанавливал - это 5... Рукоять тоже ... Как всегда спасибо за видео;
Посмотрел с удовольствием. Мастеру респект!
@ScrewsAndTools
10 күн бұрын
Спасибо, но я учусь только
@user-ut4yo7el4c
10 күн бұрын
@@ScrewsAndTools Дорогу осилит идущий...
I like the tiger stripe the wire left. Very cool restore!
@ScrewsAndTools
9 күн бұрын
Thanks!
отличная работа, очень красиво
So amazing, an object of beauty, and functional.
@ScrewsAndTools
8 күн бұрын
Thanks!
Beautiful craftsmanship. Hope to own a blade like that one day.
@ScrewsAndTools
8 күн бұрын
^_^
Шикарные циковки,береги их, современные стоят безумно
Молодец. Смотрится очень аутентично. Видно набитую руку.
Hello Alex, beautiful restoration! Great job on saving most of the original pieces! Love the brass on the scabbard! All the very best to You and Yours from Brian in Southern California
@ScrewsAndTools
9 күн бұрын
Greetings! And thank you for feedback)
Очень интересное решение с заклепками.
Как всегда залипательно! Без всяких супер пупер инструментов ! Мастер! Тысяча лайков! 👍🔥👏
@ScrewsAndTools
10 күн бұрын
Спасибо!)
Never disappointed in your restorations,your confidence in your work is obvious always a pleasure to watch
@ScrewsAndTools
7 күн бұрын
Thanks ^_^
Your skills keep improving. A beautiful job well done. BEEP BEEP!
@ScrewsAndTools
9 күн бұрын
Thanks!!
Very nice,you killed it.great looking piece.just keep on doing what you do best and carry on.great video 😎😎😎👍👍👍
excellent work, and you have some new tools again, good to see
@ScrewsAndTools
8 күн бұрын
Thanks!!
Very nice and excellent work.
Amazing work Alex, I'm so envious of how easy you make things look but I know how difficult your work really is. Best wishes from here in the UK.
@ScrewsAndTools
6 күн бұрын
Thank you!!
КЛАСС👍👍👍 на этот раз бибип услышал)))
@ScrewsAndTools
10 күн бұрын
Ура)
very good, congratulations
Bonjour vous êtes super tu continues comme ça c est super tu est un mec super
Залипаю на работу мастера. Браво!
@ScrewsAndTools
10 күн бұрын
Я не мастер, я только учусь, но спасибо)
Я рад новому видео, скачаю потом посмотрю, уверен что понравится..
Wow, well done!!!
Impressive! Looks very strong.
Amazing restoration ! ⚔
@ScrewsAndTools
7 күн бұрын
Thank you!
Incredible as always! I can’t tell you how much I appreciate the way you balance preservation and restoration with these pieces because it’s sickening to watch people put a mirror shine on an old knife that never had one
@ScrewsAndTools
7 күн бұрын
Thank you for your understanding and feedback, yes I agree with you
A very nice job
Всё Люкс! Добавьте "шарик" на нижний "стакан"! 👍👍👏✋💂♂️
Great work, Alex 😊
@ScrewsAndTools
9 күн бұрын
Thanks!
Workmanship
Well Done Sir!
Another great job
@ScrewsAndTools
10 күн бұрын
Thanks!
ооооо!!!! бииибип!!!! гуд гуд!!!🤣🤣🤣
Бебут всегда было классным оружием интересно какого он времени? Вам благодарность за ролик и субтитры.
@ScrewsAndTools
9 күн бұрын
Образец 1907 года, данный выпуск 1915 года. Спасибо за внимание
Magnifique.
Awesome restoration, Alex! Beep! Beep!
Gorgeous job, as always!!! Full beep beep!!! 🥰😂🥔🥔🥔
@ScrewsAndTools
10 күн бұрын
^_^ )))) thanks
Very nice.
Однозначно лайк!!! 👍👍👍
Oto.....mistrz....👍💪👏😀 Pozdrawiam Cię cieplutko....🕊️🥂🇵🇱
I thought I might mention a technique you might try with brass, create a paper template the exact size and shape you want and using a chisel to cut the outline, this saves potential damage from snips and saves time filing into shape. It’s a technique I discovered from an Indian craftsman and i have adopted it myself and really like it.
@ScrewsAndTools
7 күн бұрын
Hi! Thanks for your interest and advice, I'll try!)
Sensacional
Круто, Алекс!!!
Buen trabajo hermano, salu2y bendiciones de México🇲🇽🔪🗡🏹🤗
ულამაზესი მამუშევარია
Залипательно!
nice
Красота👍
Хорошо Друг😁
о, пескоструйный аппарат, отлично
@ScrewsAndTools
8 күн бұрын
Редко использую)
жорж респекто красивая вещь