Thanks for the amazing video I was squeezing that piston for like 15 minutes with my channel locks and then I found your video saved my life lol.

@MyLooneyBin

10 ай бұрын

glad it helped, my friend, yes, it is a nice trick

Wow! It's so great you can do this kind of work yourself!

Thanks again for your videos! Great 👍

@MyLooneyBin

3 жыл бұрын

Glad you like them!

Play with it just long enough for it to just slide in there 🤣🤣🤣

I’d be willing to bet the piston was NOT lined up with the marking pin on the previous install job. That’s why the top wore out faster and unevenly. That pin wasn’t in the slot. There was more pressure from the pin on the flat surface of the piston. That’s one advantage of pulling the whole caliper as you can line it up easier and slide the whole caliper back on. However it is a pain. lol. Nice work overall.

@MyLooneyBin

2 жыл бұрын

nice information to know. on most of these types of videos, the gold is in the comments. thanks for adding the info!!

Dang here in Wisconsin cars rust like crazy, we have to grind/file away where the brake shims sit and apply caliper/brake grease where the pads meet the shims. Usually there’s a “frozen” caliper pin or two also lol

@MyLooneyBin

4 жыл бұрын

wow! yea, glad I don't have to deal with that, or I should say ... havent had to deal with that.

Thanks for the video you can use the pinch weld for the jack stands and maybe use some break cleaner on the rotors before putting everything back together..

@MyLooneyBin

4 жыл бұрын

Thanks man.

@Chronological_vic

Ай бұрын

Thank you

Thank you.

@MyLooneyBin

2 жыл бұрын

hope it helped man!

Never hang the caliper by the brake line. And you should always lather the back side of each brake pad with some "disc brake quiet" or you might run into a good amount of brake noise down the road.

@MyLooneyBin

2 жыл бұрын

That's a good point. Good to try and get a can or something to put it on

6:57 Thats what she said.

@inimanifest899

Жыл бұрын

And at about the 10:45 mark she says it again lol

Sweeet!! Thanks

Good ol caliper grease in caliper bushings they wear even at least in east tn lol

@MyLooneyBin

3 жыл бұрын

that's awesome, thank you for the tips! usually people can learn more from comments than they can from videos!!

@MyLooneyBin

3 жыл бұрын

btw, Michael, do you have any input on Daryll's question??

Nice

@MyLooneyBin

3 жыл бұрын

Thanks

Great video man, saved be bout 800 from jackass mechanic

@MyLooneyBin

2 жыл бұрын

Yea they will charge you big time, and always want to replace rotors? Not sure why

Put the jack stand at the jack points

@MyLooneyBin

Жыл бұрын

good point ... thank you

Ok New to changing breaks on Accord do the breaks need to be bleed

@MyLooneyBin

2 жыл бұрын

*legal disclaimer: consult a professional*. Because we didn't open any lines, there is no reason to bleed the system. You can use a C clamp to press the pads together. If you don't open the system, no need to bleed it

On the road again. The I Phone looks great. Appreciate your support and kind words. Pray all is going well in you new hometown.

What to do when that cilender won't turn?

@MyLooneyBin

3 жыл бұрын

people say they get stuck, and you just got to put WD-40 on them

@elihughes9317

8 ай бұрын

​@@MyLooneyBinyep, pb does the trick. I found myself using a large flathead on it's side to rotate the caliper

My 93 rear brakes dont look like this

@MyLooneyBin

11 ай бұрын

I think you might have drum breaks on the back so just search a drum break video and I should show you how to do it. I don't have any on my page

Lucky for you !!! I got drums on mine smh!!!

@supremeryder3212

6 ай бұрын

Yea i think he has a v6

@supremeryder3212

6 ай бұрын

Well no because it’s a4 lug. Wtf

Is there a special tool for this?

@MyLooneyBin

3 жыл бұрын

shoulgn't need it, but you might. A press

@coreyfairbanks7374

3 жыл бұрын

@@MyLooneyBin that did not work either.

Shade tree mechanics 101 call tools by their wrong names

Thanks dude but seriously we don’t need to be told we need a jack, jack stands, brake pads, etc

@MyLooneyBin

2 жыл бұрын

I never assume, better just to throw it in ... just in case, if you truly are an old toothless lion, you know some of these young cubs running around need direction!

@Blockhead_teda

2 жыл бұрын

Some people definitely do need to hear that