√ *Watch the Video* √ *Buy The Part at 1A Auto* 1aau.to/m/Shop-TRQ-Parts √ *Do it Yourself* √ *Save Money*

@jamalbrody554

2 жыл бұрын

I realize it is kinda off topic but does anybody know a good place to stream newly released tv shows online?

This is the most excellent & thorough brake video I’ve ever seen. Thank You… I saved $450 in labor costs by using your video as a tutorial to replace the brakes on my 2014 Honda Accord. I am much obliged to y’all. Thanks again !

Thx for sharing. I came to learn how to reset the caliper piston. Knowing that it has to be rotated back to reset its home position was the ticket for me. Again, thx for sharing.

Watched quite a few of these before I change out my pads & rotors. Like this one the best. Thanks!

Telling us the torque specs is a nice touch. Thanks. A though video.

Watched this video 3 times as its the best tutorial video that I have come across. I let the commercials run to their full length just to help out your channel.

That was the best demo ever. Thanks

Very, very high quality video! Best I have seen. If I was so inclined to tackle this job. No mas though. If I had a lift I would probably make a run at it. Thank you for including the torque specs and pointing out the details to get the job done right the first time!

@TRQ

10 ай бұрын

+Vernon Wolley Thanks for watching our video! 1aau.to/m/Shop-TRQ

Thank u for this video but the torque for rear brake caliper is 17 ft-lb for accord 13-17

Very good video,explain very nice every step...

I bought the brake set from and back from 1a auto and I don't regret it.

Great job! Very thorough

Thanks buddy, appreciate the video.

Excellent video, great step by step instruction !!!!

@TRQ

Жыл бұрын

+Tim Allen Thanks for watching our video! 1aau.to/m/Shop-TRQ

Do you have to open the master cylinder lid when you compress the caliper back in to relieve the pressure?

What kind of material are the bristles made of on the bore brush you use to clean the ports at 8:20?

Thanks to show that replaces rear brake pad and rotor

must I use that block to turn the piston? thought I heard a 3/8 extension fits in there perfectly...perhaps not...

Thanks a bunch for Your valuable info. 👍😎

@TRQ

2 жыл бұрын

+alberto m penaloza Thanks for watching our video! 1aau.to/m/Shop-TRQ

Very Nice" 💥 🤙 🛠

I've never seen anyone else have the pads sit in the shims without brake grease. And I know it's a practice to grease the caliper, but it allows dust to collect on the grease

Thank you!. Now Thanks to HONDA I need to buy or borrow the tool to push the capiler.

NICE!

Most through video I have seen for brake replacement

@TRQ

3 жыл бұрын

+Deborah Facciani Thanks for the feedback! 1aau.to/m/Shop-TRQ

Got to justify the 3hr quote😂

Why didn’t you cover adjusting the E brake?

You forgot to put the screws back in the road or you can clearly see how they’re not in there

Those boots looks really inflated....good idea to bleed them after greased

@SUArmy12

3 жыл бұрын

Ran into this issue when I did mine. They seem to go under vacuum and don’t move as well when you force the air out. Is that the way they would come from factory?

and i sit around complaining about how hard it is to do repairs on my chrysler. that was a lot of work just to change out the breaks on that honda.

@markwarren7959

3 жыл бұрын

Try dong a brake job with drums. This is a walk in the park.

Why did you have to unbolt the bracket for the ebrakes?

@kazymerchyk

Жыл бұрын

You don’t have to, but it makes getting the caliper to clear the rotor to remove it easier

Waaaaay too much grease on the pins! in this case, more is not better.

@TRQ

4 ай бұрын

+@xr500t Thanks for the tip! We'll pass this info along to our production team. 1aau.to/m/Shop-TRQ