After THREE HOURS of tutorials: your video made my system work. Thank you so much.

Dude. Im donating. been looking for something like this for years. now i have the audio seperated from my call of duty game play videos easily. they have the coolest sounds on that game.

Thanks man! I could never take the few mins to finally wire up everything tight. I'm quite embarrassed being a producer and not figuring it out myself. Happens to the best of us! So helpful and on point! Didn't realize about the A1-A3 being able to send the input around on the top right, plus have not noticed the AUX Virtual ASIO Device in my FL Studio! That's all I was missing there.

You are a legend. Thank you so much for this!!!

The Video which i was exactly looking for!!!! Thanks a lot man : )

I couldn't figure out how to get youtube audio recorded on Cakewalk so I can play and record my e drums to it. Came to this video and you mentioned loopback, so I set the input on my Scarlett 4i4 to Loop 1 or 2 or 1 and 2 and bingo! Works perfectly. Thanks very much.

man i love you, i was losing my mind triying to figure out how to do this . and finally found it thanks bro

This is awesome! Thanks a bunch!

Great vid really needed this☝️

Excelent Video! So clear to explain it. You solve me a huge amount of problems with this, and is so useful for many purposes. Thanks you ! Greetings from Chile

Thanks! The software worked for me and I was able to record some stuff off KZread and into Cubase for an important potential gig. I found the explanation a tad lacking and confusing though, as he doesn't explain how the program routes things so well... But, he DOES tell you the "what to do" part, which is the most important. So the end result was success, though I still don't have a good understanding of the routing.

thank you brother no more screen recorder

This was the best. Helped me out tremendously. Now to figure out why my mic is not working lol

Thank you so much man!!

Thank U I am donating tooo!! Great tool

This is useful!! Thank you very much! From what you experienced, does this cause any latency to the audio stream?

Hey guys, I done did everything (except routing to stereo in my daw because I didn't see the option) It works!! but it is very glitichy. I set up the b2 and a1 correctly(i'm on windows 10). Anyone have this problem before? and how could it be resolved?

thank you!

thanks mate :)

THANKS A LOT!

finally a solution to my issue. wanted to stream drums on twitch with my daw and streamlabs but the audio from spotify was always a few milliseconds late on the audio feed. Thank you so much

Would you be able to still record vocals over the youtube audio? I want to upload instrumentals to rap over

My settings are as same as yours. And I can hear the audio from streaming platform perfectly. My question is i put FLUX stereo tool on the track and it showed the audio is MONO but my ears told me It's definitely stereo, whats going on??

Works with Cubase, thanks a lot

Thank You

Not one videos is clear how to record the audio from your interface in voice meter banana without a feedback loop. I’ve done everything and can’t figure that part out. Got audio everywhere but just a feed back look while recording in real time. Problem also is obs isn’t recording pro tools audio but picking it up

i have appollo UAD x8 , do i need third party softwere " bannana " to recored in windows 10 " youtube, and other streams

I get a signal to my DAW (Ableton) put not thru the AUX channel. It gives horrible sound quality.

Hey man, question could this work for a plug-in like bias fx? Will it have a direct monitor on the DAW?

How do I record all pro tools audio changes to upload to KZread or elsewhere?

Hi! Great video. What about if i want to record vocals in my DAW?????

ty

Thanks for this tutorial. When you playback what you have recorded in your DAW is it better to switch to proper manufactured ASIO driver (I use Focusrite) otherwise the sound is a bit crackling, is it correct in your opionion or is there a workaround? thanks so much again

@anttisaksi5735

Жыл бұрын

I had that problem! Thanks for the tip!!!! It's still not perfect but much better.

Great video. I am using Studio One and can get what you demonstrate working, but I can't seem to then get anything routed through my interface to record on my mics. I am recording a podcast so I need mics and PC audio recorded at the same time. Any ideas?

@BenoniStudio

5 жыл бұрын

It depends on what interface you have and what you are trying to do. If your interface has Loopback I'd just use that. Have you seen this video The ULTIMATE Guide To Screencast Your DAW - Voicemeeter Potato & OBS/Streamlabs kzread.info/dash/bejne/dqZtzahyqbW3Z5c.html It might give you some ideas of other ways you could use Potato to route audio

@thereisnousernames

5 жыл бұрын

@@BenoniStudio Will check it out, thanks.

@leohagan5274

4 жыл бұрын

I'm thinking about getting studio one 4. Can you tell me if this method would work for to import instrumentals from youtube to record vocals over?

@nigelphillips7454

Жыл бұрын

@@BenoniStudio hi does does this voice meeter banana tutorial help edison record more clearly with asio4all if dont understand me ill try to be more specific please reply me i would really appreciate it

i got it to record on my DAW (ableton) but now im not gettin any audio from my daw lol ? how can i fix this?

I want to use my DAW as a live karaoke with KZread and mic inputs (with DAW insert effect) simultaneously.

@lipphil4494

3 жыл бұрын

is it posible in focusrite?

did everything in the video. I keep getting "Could not complete your request because Pro Tools could not set sample rate to specified value" whenever I try to access one of my sessions after selecting my playback engine.

@BenoniStudio

4 жыл бұрын

You probably have a sample rate mis match between Pro Tools and Windows.

@TheWesleyt

4 жыл бұрын

@@BenoniStudio I got the same error. Then I turned off pro tools, made sure my hardware out was the ASIO in Voicemeeter, then made sure to left click and change to Voicmeeter input down in the bottom right (from his earlier instruction in the video regarding the speaker icon). It seemed doing those two things fixed the problem for me. Haven't had the problem since.

I have a little bit more of a technical thng that I THINK loopback recording can do. Basally , I want to record guitar on my daw. I lay down the track, record it. Then I add effects to it. THEN I want to be able to record me manipulating the effects in REAL TIME...... To my DAW. So that I can have a track (rendered) of me manipulating the effects in real time (like delay for example). Can loopback recording do that?

@BenoniStudio

3 жыл бұрын

Yes, loopback can do that. I always recommend loopback or using two interfaces. This video is for those without 2 interfaces or an interface that includes loopback.

@now_im_here3661

3 жыл бұрын

@@BenoniStudio Oh awsome. I have a pretty big audio interface so I can always route outputs to imputs and such. I also just figured out that I can record just automation. So I think I got it covered. Sorry.. Total FL studio newb here lol

You rock. I would love more help. I'm just new to streaming audio tech and I have lots to learn. Let me know if you open to stuff like that.

@BenoniStudio

3 жыл бұрын

If you are new to streaming with an audio interface, you may be interested in loopback. Loopback is built-in to some audio interfaces/drivers and makes it easy to route audio in to a DAW or out to OBS for streaming. This video is for those who don't have an interface with loopback or don't want one. But loopback will make your life easier. Many interfaces include loopback, here's an example: PreSonus Universal Control Loopback - Record Computer/KZread Audio Into Your DAW kzread.info/dash/bejne/d6VqssyrlJnco9Y.html PreSonus Universal Control Loopback - Record DAW ASIO Audio into OBS/Streamlabs kzread.info/dash/bejne/dGSrrqezqa3MXbg.html EVO 8 LOOPBACK - Record Computer Audio Into a DAW kzread.info/dash/bejne/X3tplNiYaLW5Zpc.html EVO 8 LOOPBACK - Stream/Record Your DAW kzread.info/dash/bejne/gnZ62bGqkpmoldo.html Again, you don't have to necessarily get these exact interfaces, there are others like the Gen3 Focusrite Scarletts that also have loopback.

@jrelliottproductions

3 жыл бұрын

@@BenoniStudio NICE. Thank you very much. I'll check into loopback for sure and watch those videos as well. Blessings

@nigelphillips7454

Жыл бұрын

@@BenoniStudio hi does this tuorial help asio to work in fl studio and does the start of the video help you fully install voice meeter please reply me asap thanks

Hi - Right I followed it as closely as I could. Inputs etc all set up. When I click monitor I see the track monitored in VM Banana AOK. However, after recording, when I playback there's just silence? So I swapped my Playback Engine back to my AI (Focusrite Solo) and the track comes through but there's a lot of crackling? It's annoying as every time I want to swap Playback Engine it has to shut and reopen the project. Must be some simple way to listen back what I've just recorded and I'm being dumb? Any hints appreciated! And also any idea on the crackling would be useful. It seems to be the track recording with the crackle issue - if I listen this video it's AOK so can't be speakers/headphones. PS my goal is to record Spotify tracks into a DAW and me playing guitar along to them. That’s all I’m after really! :)

@gamefantasticcuz

4 жыл бұрын

Hey, I have this same issue I was wondering if you found a solution.

Dose this work on mac?

@BenoniStudio

4 жыл бұрын

No. Windows only. For Mac you can try Quicktime, Soundflower, or a program called Loopback.

5:28 at the ned explanation in short!

Better than the other videos but still couldn't do it ahhhhhhh

@macaroon147

5 ай бұрын

lol

@BenoniStudio

5 ай бұрын

The best way to do this today is with an audio interface that has loopback built in. You'll save yourself a ton of trouble.

Simple, you made it pretty complicated though.