With this method you will be able to route your ASIO audio into OBS, but also use the inputs on your audio interface routed INTO your DAW. So you can use live inputs with plugins and capture everything while screen recording or streaming. There is TIMECODE in the description, so use that to jump to the sections you want to see. Hit that Like button and Sub 👍

This must be one of the best and most comprehensive tuition videos on youtube. You have just solved what was a massive problem for me. Thank you so much.

This is by far, the BEST video on KZread about VM. I was so frustrated for months, now everything works! Thanks !

Dear lord. This is the best fucking video I've found. For 2 weeks I've been trying to get a twitch account up for music performance. This video was all I needed.

My goodness! This is the only VM Tutorial that worked for me! Was able to feed my Zoom Podtrak 8 & Daw all into OBS!!!!

My friend, thank you very much! It was the second time he'd bailed me out. I almost gave up the idea of making a realtime virtual master bus for a mix with a looper and separately for vocals, unsuccessfully trying to set everything up in Voicemeter, but I saw your video in time and everything worked out! Thank you very much, you are a great fellow!

After 2 days of frustration and no progress... I stumble upon this video. Thank you!!

This is an amazing video! What a relief. I think I watched about 8 videos still scratching my head until I found this. Thank you! Step by step and makes perfect sense now.

This is only the 2nd video of yours that I've seen and I'm already in love with your content. Thank you so much!

@BenoniStudio

4 жыл бұрын

Thanks for watching

Thank you so much for this no nonsense, deep learning tutorial; dare I say “old school” in its presentation which, as I guess I’d be termed old school, I really appreciate. We can now move forward in our guitar tuition live streaming programme in part due to your input. Thanks again. Ged.

Thaaaaaank you for this! I've been pulling my hair out trying to figure out how to stream protools sessions on a PC. There very limited resources and after hours of searching I wish I had found your video sooner. The information is so scarce that you could probably sell this tutorial.

I can't tell you how long I watched this 18 min video but it was very helpful with what I'm trying to achieve. Thank you so much for this content!

Thank you very much for your help! I could never figure out how to feed my audio from Cubase to OBS/SLOBS for the longest time, and now, that's been resolved. Really appreciate the clear and concise help from this video!

Awesome! I have been looking for something like this! You exceeded my expectations with a very thorough tutorial with every option! Thanks!👌🏾👌🏾👌🏾

@BenoniStudio

5 жыл бұрын

Thank for the view and comment 👍

This is the best voicemeeter tutorial I've seen, I was struggling with voicemeeter on how to record my external mic and synths, now I know, thanks for this tutorial :-) :-)

@BenoniStudio

4 жыл бұрын

You should be able to get latency lower by reducing the buffer for your audio interface. And you should monitor the audio from the DAW, not from OBS because that will add more latency. All of this depends on the interface you are using, some have more routing options than others. Just tinker with it.

Wow, this was pretty comprehensive and incredibly useful!

Great Tutorial! Very in-depth and highly polished 😁👍

This is absolutely perfect! The best voicemeeter tutorial on the internet bar none!.. I must have watched hundreds and this is the only one that worked and made sense to me... An absolute lifesaver at this time, huge kudos for doing this!

@BenoniStudio

3 жыл бұрын

Enjoy 👍

the best tutorial in the youtube! thank you very much!

Fantastic, in depth tutorial. Got me just about set up, using my Clarett 2Pre. Looks and sounds great, I just have to play about with getting my Mic in the mix and I'm sorted. Cheers, fella!

Spent a full day and night at this as I was struggling to get my DAW and voicemeter (banana) to talk. Came across your Banana vid which led me to this. I can now do my charity live stream on Monday...thank you so much!

@DannyOLearyMusic

4 жыл бұрын

Scratch that, my voicemeeter is sending the 4/5 daw inputs i'm using to inputs 1 & 2 only. How do I change this? Really really stuck!

Man you just saved my life. Thanks for this tuto!!

Thank you this video is gold!

Thank you! Great video

This video solved a lot of my problems. Thumbs up!

Thank you... SO SO MUCH !! this has been a struggle for me, your tutorial is perfect ! :)

@BenoniStudio

4 жыл бұрын

great. thanks for the view 👍

This is the best tutorial I've ever seen. Holy shit. You're a legend.

Thank you very much for this amazing guide through the very thick fog that is the internet!!

You deserve my sub, like, comment and love! Thank you sooooo much man. You made my day and now I shall sleep with a much lighter spirit. :)

This is super useful thank you

Very Nice!!! Thanks.

Most detailed video so far

Very helpful thanks

Great video! thanks a lot

Thanks man.. This really help me

Thank you good sir you are godsend I have been trying to wrap my head around this crap for a while now and you made it simple and easy to understand while being straight to the point. Also you have a fantastic commercial voice you must do some sort of voice acting or commercials and if not you should!

@BenoniStudio

4 жыл бұрын

thanks for watching 🤘

i fucking love you for this.. you will be one of the reasons why anselmineedyou will rise to the top

@BenoniStudio

4 жыл бұрын

enjoy 🤘

Just got komplete audio 6 mk2, Thank you brother.

@BenoniStudio

5 жыл бұрын

I have the original K6, they are solid interfaces.

THANKS A LOT❤🤘

Vey informative and details tutoial

Amazing tutorial thank you so much

@BenoniStudio

5 жыл бұрын

Thanks for the view 👍

THIS IS THE NUMBER ONE TUTORIAL AVAILABLE FOR DOING THIS!! YOU ARE AMAZING MAN!!!!! THANK YOU SOOOOOO MUCH!!!

@BenoniStudio

5 жыл бұрын

Cool man, enjoy 👍

@nz4129

5 жыл бұрын

BenoniStudio so after streaming a session I have run into a bit of an issue I’m getting a very aggressive crackle though voice meter..

@BenoniStudio

5 жыл бұрын

Are you listening through the ASIO drivers or WDM? You will have to try different drivers and also adjust the buffer. This will depend on your exact computer. You'll just have to experiment. Start with the buffer. If you are recording at the same time change the path to a non-os drive.

@nz4129

5 жыл бұрын

BenoniStudio ok been at work the past day, but will have a chance to try this out tonight! Thank you so much for getting back to me! I’ll let you know how it goes!

@nz4129

5 жыл бұрын

@@BenoniStudio So I have my A1 on VM Potato set to ASIO it is labeled as Komplete audio 6 as I have the old silver NI k6. I also have my A2 set to MME: Realtek Digital Output (Realtek) I am trying to use all 4 of my inputs to track and produce while streaming and recording my sessions for youtube tutorials as well as streaming my production sessions so people can see so basically need full access of my daw to do everything while streaming it all and having a clear path for my mic to be active and this has done it but with those crackles. So I did adjust my buffer rate but had to go all the way up to 48k 512samples does that seem normal because seems almost 4 times as high as you set it and you mentioned setting it as low as possible without getting any problems.

Bro thank you so...... much

Thank you very much for this incredibly detailed video. Even my dumb ass finally figured it out! Cheers from Switzerland!

@BenoniStudio

4 жыл бұрын

Enjoy 👍

Great.. Thanks man..

@BenoniStudio

5 жыл бұрын

Sure, enjoy dude

Thank you very much! I'm struggling for 4 weeks now to find a solution to this. Although it's important to mention that it's not going to work with every sound interface. I have a Focusrite scarlet solo 2nd gen and I tried this method with the same settings that you're showing in this video. I got huge latency and if I'm lowering the buffer size of my ASIO driver I get crackling sound. So I decided to upgrade my gear and I bought a Scarlet 8i6 3rd gen. I got the same crackling sound but this time it was less and it was in the background. The latency was the same. I've got really disappointed with Focusrite products after this. I sent back my 8i6 and I purchased a Steinberg UR22C. It was a relief to hear the sound finally without any latency and crackling sound. The only cons are about the Steinberg interfaces that the preamps are a bit weaker and the Headphone output gain is not that powerful as the Focusrite.

@demoinglife

4 жыл бұрын

I have a similar crackling audio sound and I'm using a scarlet 6i6. You had no audio crackle sounds by getting a completely different audio interface? That's crazy

Thank you!! 9:52

Thanks! Great video and got me going nicely! Just a question, at the 10:30 mark you go into settings and set the channels up 1 in the left box of one and 2 in the right box of 2, got it but what happens if you do 1 and 1, 2 and 2 instead (In 1 has 1 and 1 In 2 has 2 and 2)? Thanks again!

Thanks for the help! The ONLY issue I have right now is that I am trying to use 5 inputs from my DAW. Voicemeeter Potato is picking up the 5 separate inputs, but my DAW is only picking up audio from Input 1? In other words, I cannot use all 5 tracks independently in my DAW. Is there a way I can link each respective DAW track to the 5 corresponding Potato tracks? VAIO3 is picking up correctly in OBS, I just want more control from my DAW.

Thanks for your tutorial. I was able to follow exactly through your instructions and set up my OBS to record and stream music. However, the audio is coming out distorted, and with a lot of crackling noises while monitoring through my headphones and in my recordings. It is completely unusable. I tried to increase the buffer size of my Focusrite Audio Interface and tested all of the available sizes. At Max buffer size the distortion is completely gone but the audio however freezes at certain times and has no sound kind of silent statics. Can you please tell me how to fix it if you know? Thanks.

@goobstersroom

2 жыл бұрын

im having the same issue

Can you record an input signal (a guitar), and playback existing audio (back tracks) while Capturing all of it in OBS without a feedback loop? I can't seem to get it to work

Thnx

BEST VIDEO

@BenoniStudio

4 жыл бұрын

thanks for the view 👍

Hi amazing video, so well laid out in detail step by step, subscribed! I am having a bit of a challenge however with this set up selecting VM aux in reaper as the ASIO driver in preferences. I have an old two channel input audiobox audio interface with mic in channel 1 and guitar in channel 2. Reaper hears both channels simultaneously and is not separating the two channels independent of each other. This despite the VM settings being correctly entered in the "Patch ASIO to Strips" (IN 1 has 1 and IN 2 has 2 as you describe). They are separating accurately in VM but not in Reaper? Interestingly, Reaper does separate them only if I select "Virtual Potato Insert Virtual ASIO" as the ASIO driver, however, I then receive no playback to VM to hear Reaper this way. I hope I have described the issue clear enough. Thoughts?

Is there a similar tutorial to this but for Adobe Audition by any chance ? Trying to split the Mic and Desktop audio onto separate channels.

Update: When I set A1 with Asio Zoom Driver (which is my interface) I don't get any signal in the Voice meeter VAIO. But I do see signal when I set to "WDM line Zoom", in this second instance I can't see the Patch Asio Inputs to stream. Hi, great tutorial. I just have a question. In the part when it comes to patch audio inputs to stream I can't see the channels, only MME Zoom audio interface. So I'm not being able con set and monitor the input in Cubase 10.5. I have a zoom r16 8ch. Thanks, I already subscribed.

Im having trouble with my setup. I cant seem to change my playback audio to Voicemeter AUX Virtual ASIO in Protools. idk what im doing wrong i follwed every step. PLEASE HELP 🙏

Well done. The only thing I'm still missing at this point is how to use the effects send return panel in potatoe, and if there's any way to add vst's directly to potato, because it's EQing suuuucks

@BenoniStudio

4 жыл бұрын

Potato does not host VSTs. OBS can though if that helps.

Hi. I have obs, voicemeeter potato, presonus music box (use 2 lines), and FL studio 12. Can you please help me set it up?

Any idea why, no matter what output I choose on A2 (WDM or MME), I hear a loud, consistent click every two seconds? The click worsens if I modify the buffering settings, so I know it's sample rate/buffer related. I'm using Reason 11 and a 3rd gen Focusrite 4i4.

why my RGB Lighting Audio triggered with Fl ASIO as DAW Engine + windows speaker output at taskbar but not any other option like asio or voice meeter??? i tried all possible scenarios i guess... is there any way to reroute this trigger into Voicemeeter somehow?

you left steps out, especially when it came to the routing, I notice the main output and realized this was not talked about, and I also have to ask what version of protools did you (8.28 time stamp) do this with because I'm on 11.3 and our screen don't look the same and I'm aware protools is are on a higher version, I just don't want any details left out... Thanks in advance

@SimoneStar

4 жыл бұрын

Check here: kzread.info/dash/bejne/ZGp-z6qiqJOrg7Q.html we're watching now and it's helpful but ymmv

Hi Hope your doing well. I thought i would contact you as i enjoy watching your lesson discussing the 11 rack and also Voice meeter. What I was wondering do you know of a way to use the 11 rack with amplitube or guitar rig running through Voice meeter and outputting to Skype. I have tried various methods but I only get a dry signal being sent to Skype. If it wont work with the 11 rack do you know of a way to make this work with a focusrite Audio Interface?

@9gaggertons476

Жыл бұрын

Did you eventually get your question answered? I'm trying to get my scarlett audio interface to work with Skype too.

Thank you! But in this metod i can't record on pro tools more than 2 inputs? i've a 8 input audio interface, and pro tools with VMinput lets me choose only 2 input ( like advanced metod ).. the 3th imput route to input 1 and 2... who can help me please? Thanks! However, great vid! Sorry 4 my english!

Thanks a lot. you can to explain better as a ger....and i cant it write omg. greets from germany and more tutorials please

nice job, is the only video who can really help! but i have a problem on the input sound. i work with a focusrite scarlett 2i2 3rd gen and it woks very well without this method, but when it came trought voicemeeter it begins to make a sort of cliping effect(?) so my stream have this problem on sound too. i´ve seen the video many times and i can´t solve the problem (even changing the buffer size and sample rate). hope you can help me!

@BenoniStudio

3 жыл бұрын

I'm not sure what Windows drivers are provided with the 2i2, but sometimes you have to switch from WDM to MME. A better way to do this is with Loopback which is available on the Scarlett 8i6, 18i8, and 18i20 Gen3 units. I think the 4i4 may have it too.

this is the closest i've gotten to fixing this. when i play into my interface, there's a constant ticking. i've changed the buffer size to every available option, in both the asio settings and scarlett mix control, it doesn't seem to make any change.

I got this to work! Thanks! This seems like a good solution for 8 channels or less (Tutorials etc)... Is there a way to stream 16 audio channels with plugins? I am trying to figure out how I would be able to livestream band performances, running my 16 channels into Reaper, mixing and adding EQ, Compression etc.... and streaming the stereo Audio WITH plugins with the Webcam video.... I have a Focusrite Saffire 8pre interface lightpiped with a Presonus Digimax FS 8pre for 16 total. My DAW is Reaper. I understand that Voicemetter might not be the option here, but is there something that can handle more channels?

@CreatorsMediaTools

4 жыл бұрын

How about sending sub-mixes from Reaper to Voicemeeter/OBS rather than every individual channel? Reaper's routing is very good.

@MilesTippett

4 жыл бұрын

@@CreatorsMediaTools I ended up using Synchronized Audio Router for this issue, and I was able to send my whole Reaper master bus to SAR. Works great!

Thanks for the video. Unfortunately with Ableton and a Scarlet 2i4, I'm getting clicks and pops - even when I set the buffer to maximum - which is unusable anyway because the latency gets so high. The clicks correspond to the size of the buffer. Lower buffer = faster clicks. Larger bugger = slower clicks, but the clicks won't go away. Maybe this just doesn't play nice with Ableton. Bummer.

@TravisShallow

4 жыл бұрын

I'm using ProTools and I'm getting the same clicks and pops, Im also using a CamLink 4k video capture USB, and when i turn that off the clicks go away, but when its on the clicks and pops come back. Still trying to figure out a solution.

@9gaggertons476

Жыл бұрын

Is this still an issue? I want to use a scarlett 18i20 and Ableton to Skype with a guest for a podcast

hey, thats the second vid I watch and you seem to be pretty good in this stuff! Maybe you can answer me some questions? When I choose WDM on Voicemeeter my sound is totally distorted. MME and ASIO works fine. On the official forums they say choose the best device possible so that would be ASIO I assume. But you also said you use MME, but isnt it very old and has more latency? I just use ASIO for no eventhough I just use my computer quite usual, like watching TV shows, playing games (streaming), ect. no professional Audio recording or whatsoever. And there is one more big issue: Sometimes I just want to watch a movie with DTS on my big screen and thats kind awkward. When I shutdown VB its working as intended. But when I use VB with the 2nd virtual output and setting up my SPDIF-Out of my Audigy 5 to A3 I can basically see on the bars in VB that it receives all 5 channel but my Onkyio TX-NR509 only receives stereo. There is this tool VB-Audio Cable Control Panel. It says Input 6 ch but output only 2 ch. Any idea how to fix this?

@BenoniStudio

5 жыл бұрын

When I say I use MME, I am referring to the audio driver for my computer speakers, the 2nd audio source. You should indeed have ASIO for the #1 source since that's where Potato gets it clock and sample rate from. For your second question, I don't know. I'd have to actually get hands-on with the equipment to figure out the routing.

@snip4yt

5 жыл бұрын

@@BenoniStudio ok thanks, and what is the reason you use MME instead of WDM on your second audio?

just an FYI. Some focusrite audio interfaces don't play well with voicemeeter. I could not use my Scarlett Solo interface with Voicemeeter, as the resulting audio was terribly distorted. I switched to a different brand (Audiobox) and no more distortion.

Ok, this makes great sense. But, for the sake of asking, can I do everything the same but cut out the DAW. Im really just trying to multitrack from my interface to OBS.

@BenoniStudio

4 жыл бұрын

Yes....kinda. The inputs would be setup in OBS from your interface.

XLNT!!!

@BenoniStudio

4 жыл бұрын

thanks for the view 👍

wouldnt you get a copy right strike using it or does the fact you are doing it this way prevent this

Can we get an updated version of this please. i hear alot of people are transitioning to the ASIO capture plugin / Audio monitor plugin. If you are now using that instead can you make a new video on how to do the same thing

@BenoniStudio

3 жыл бұрын

I have not used that, so I don't know, i'll have to check it out first. But an audio interface with Loopback is the best way to go today.

Works perfectly on my Focusrite 2i2 on my Zoom R16 however, in VoiceMeeter when i select A1 - ASIO Zoom r16 driver it doesn't playback , doesn't detect inputs either (already setup ASIO inputs strip) unless i select WDM Line Zoom R16, but this has no input , only for playback Planning for full band Multi channel live stream set up mixed in DAW to OBS Any idea? hopefully not a Driver issue

@BenoniStudio

4 жыл бұрын

Again, the easiest way would be to simply patch the output of your interface into your computer. It would also be the lowest latency. They cable is only about $8 - it will make your life easier. You could also get an audio interface that has loopback built-in. Does the Zoom R16 have loopback? I've never used that model.

@SHAMYxk7

4 жыл бұрын

@@BenoniStudio I think that would be the best setup for me, 2 interface since mine doesn't have loopback Still really appreciate your tutorials, exactly what i need unfortunately voicemeeter has limits to but your tutorials really made me understand how they work Thank you so much again for your help!

@diegoyakich9194

4 жыл бұрын

I also have a zoom R16. But can't see the patch Asio inputs to strips, they just don't appear. (10:29).

i cant see my plugins on OBS, how do i fix that?

Hey there. Thanks for the video, and thanks for introducing me to these software. I'm having an annoying issue here though.. all my playback and recording devices are set to 48khz on the device list, but I'm still having that nasty crackling sound during pro tools playback. Even voicemeeter is displaying different sample rates on top of the virtual input tracks. Would love some help. thanks.

@BenoniStudio

5 жыл бұрын

What sample rate is your DAW set at? Try to match things up if you have problems. And you may need to up your buffer.

@Akurios

5 жыл бұрын

@@BenoniStudio DAW is at same 48khz. Let me try raising the buffer size till it stops.

@Akurios

5 жыл бұрын

@@BenoniStudio All sample rates are 48khz. Buffer is at a whopping 1024, but I still have the crackling and popping sounds which only occur when voicemeeter is running. Don't know what else to do.

@BenoniStudio

5 жыл бұрын

Are you listening through the ASIO interface or computer speakers? If it's computer speakers, try changing the driver. If it's the ASIO interface, the only think I could suggest is getting another one and try some new ASIO drivers. If this method isn't working for you, try the two interface method or the cable method. How To Use Two Audio Interfaces To Record/Stream Your DAW w/ OBS or Streamlabs kzread.info/dash/bejne/lK1kmcywlJSxdZs.html the cable method is at the end of the video.

@Akurios

5 жыл бұрын

Listening through my asio interface. The whole thing is weird though. This just started with VB Potato. Everything was fine with banana before I reinstalled it, thinking potato was the issue. Will check the other options. Thanks a lot.

Why am i getting a lot of clicks and pops from the pro tools audio?

can you do this video like for skype and zoom minus the obs

@HoboInASuit4Tune

4 жыл бұрын

It's the same but iwth an extra step - a virtual camera plugin for OBS, to use your OBS composite video as a webcam source.

can you do this vid for studio one 4?

@BenoniStudio

5 жыл бұрын

it should be pretty much the same for any ASIO daw.

Has anyone used this for a 5.1 surround setup?

Idea is good but you lose latency in live performance when using Voice meeter

Does anybody know how to "Set the input of the mic track to VM-VAIO 1" in Ableton??? I feel like that's the only thing keeping me from making a loop-free solution

@AshRavens

4 жыл бұрын

yeah I'm looking for the same thing. Anyone?

@BenoniStudio Short help? All worked until 9:50. Then I don't get the signal into OBS. Activated B1, B2, B3 and see the signal in Voicemeter but the OBS Voicemeter AUX output stays dead...tried all other voicemeter outputs... no luck...

@BenoniStudio

4 жыл бұрын

Go over the instructions again and verify that you have set everything exactly as I show. Make sure you have an Audio INPUT Capture in OBS and you have selected the correct output from Voicemeeter. Head to the website for text instructions too. benonistudio.com/the-ultimate-guide-to-screencast-your-daw-voicemeeter-potato-obs-studio-streamlabs/

@chrisr1241

4 жыл бұрын

BenoniStudio thank you. I already viewed the video 10 times but now I will try your text instructions. I set the obs input capture correct but still see nothing on the meter... the voice meter buses show signals... sound card is rme babyface

@BenoniStudio

4 жыл бұрын

The Babyface should have Loopback. So you shouldn't even need to use Voicemeeter to get the DAW audio into OBS. I use a PreSonus 1824c which has loopback, so that's what I usually use - like this PreSonus Universal Control Loopback - Record DAW ASIO Audio into OBS/Streamlabs kzread.info/dash/bejne/dGSrrqezqa3MXbg.html

@chrisr1241

4 жыл бұрын

@@BenoniStudio You are really my king! I still have the same problems with voicemeter but your hint was the key. I installed the asio obs plugin and activated loopback. Runs perfect! So I can start making audio videos... Amazing!

Can this be done with Voicemeeter Banana or does it have to be Potato and if so why?

@BenoniStudio

3 жыл бұрын

It should be, I think I have a video using Banana. Potato has more channels though.

Followed it word for word through 12 minutes in, i get clicks even tho all my buffer rates match, and it doesnt add MIC into the DAW in OBS..

@cyntelsince.8886

3 жыл бұрын

im in ableton, highly doubt it makes a world of difference tho..

Didn't work for me - audio files recorded in Pro Tools were insanely laggy and full of clicks/pops. Never happens when I go straight into Pro Tools (without OBS.) Any help would be appreciated

@BenoniStudio

4 жыл бұрын

I don't know what you are doing so I can't say. What sound is being routed where and why? Are you using an ASIO driver for A1 in Potato? Did you raise the buffer?

is there a Mac variant of Voicemaster Potato?

@BenoniStudio

4 жыл бұрын

No. But there are other programs like Soundflower or Loopback that should work.

Is there a Mac option?

@BenoniStudio

4 жыл бұрын

You'll have to look to things like Soundflower for Mac. Or a program called Loopback rogueamoeba.com/loopback/

Idk why it doesn’t work on me, I followed everything to the teeth. I just wanna record whatever audio output I have in my DAW to OBS.

@BenoniStudio

3 жыл бұрын

This video is for those who don't have an interface with loopback, and it works well for that. But my preferred method is an interface with loopback. And I would highly suggest that anyone who needs to do this more than a few times to pick up an audio interface that has the loopback feature.

The really sad part is software that are packages with the audio device should already do this out the box. for example, Universal Control of Presonus should have all these operations and features right within their software. People shouldnt haveto or be forced to use a 3rd party software like voicemeter, when the DAW included softeware such as Universal Control should already do this out the box. This is why I am pissed off at Presonus and many other audio device companies. I have a friend of mine, who just purchased the Studio 192-Mobile, its brand new. and ever since he got that device, its been nothing but nightmares. To the point that Studio One v4 he has doesnt recognize the audio device. He even had people from Sam Ash and Guitar Center come to his studio to make it work, And they all have failed. The device has been RMA'ed (twice) and twice it still doesnt work. He feels ripped off, and rightfully so. 1 week later and newer version of the audio device came out, (My friend was pissed when he seen that). I dont think these companies are putting their heart into these audio devices because if they did , these devices would work as they should be, And they shouldnt need 3rd party applications to somewhat solve their problems, when the audio device should already be packaged with all this. BTW - Great Video and awesome voice. straight to the point too, awesome work :)

@BenoniStudio

5 жыл бұрын

It would be great if all interfaces included something like this. The PreSonus Studio 1824c does have this in Universal Control, its an option called Loopback that works pretty much like this. I don't think the 192 has loopback though. Alot of RME interfaces have it built-in to the driver as well.

@TwstedTV

5 жыл бұрын

​@@BenoniStudio I miss the M-Audio Firewire 410 and the 1810. They worked like a charm. And when you choose a Audio Device in any DAW with those devices connected, in the list it actually showed (ASIO-Firewirer-410) , -- And the sound went in via computer and through the Firewire and on to the internal DSP directly within the device and internally the device simultaneously output the sound to ALL outputs on the device at the same time. Unlike Studio-192 that its either or. and you have to mess around with windows settings and DAW settings, its like building a rocket just to get sound. My friend has been going through hell with his Studio-192 that he has and he is about 2 seconds from throwing it across the street. My friend is not naive with audio gear either, he works in the industry for a living, so its not like he is brain dead about it. It seriously doesnt work like its suppose to. The Studio-192-Mobile is just pure crap.

Everything I playback thru voicemeeter sounds so bad.. Is anyone else dealing with this issue? Any suggestions?

@BenoniStudio

Жыл бұрын

In the year 2022 I would recommend everyone simply buy an audio interface that has Loopback built in. Its more reliable and avoids the latency problem. These days you can get an audio interface with Loopback for around $99 and its worth it if you want to stream your DAW. If you are new to Loopback, checkout the Loopback chapter of this video Audient iD44 MKII Audio Interface - EVERYTHING YOU WANT TO KNOW kzread.info/dash/bejne/hKKJo7CfpJmvfps.html Loopback will work the same on any other interface, like the EVO 4 for example.

I get choppy audio from ableton live to voicemeeter.. stuttering like crazy :(

@demoinglife

4 жыл бұрын

I have a similar problem. Trying to find a solution. Are you running a powerful computer Daniel? Maybe our computers can't handle the buffering of audio. I wonder if BenoniStudio has a solution.

@threadatlas

4 жыл бұрын

I have the same problem with Vaio 3 and abelton, i have a 3900 rysen with 32 gbs sooooooooo

i still have delay

@BenoniStudio

4 жыл бұрын

As long as you are using an ASIO interface, you should be able to reduce the buffer to eliminate latency as long as your PC has good specs. And you should monitor though the interface, not the output of OBS.

@NicanorVillanueva.

4 жыл бұрын

@@BenoniStudio i fix it instaling voxengoconverter...it is a vst pluguin , i put it in the stereo output and then obs took the signal just fine

1.11 o hi mark

@BenoniStudio

3 жыл бұрын

Let's throw the football awkwardly.

Repeat after me: you don't need Voicemeeter, there are much easier ways.

Literally the most convoluted bullshit ive ever seen

@BenoniStudio

4 жыл бұрын

...then you've never seen this kzread.info/dash/bejne/pYiHo8Gsh6qzZJc.html