Every time I see videos like this it strikes me that concrete and rebar must be like gold in these country’s. They are all working in the dirt, not even the simplest of workbenches as long as the eye can see.

@Adamski727

Жыл бұрын

I take that back, there was a workbench in there 😅 Concrete on the other hand, nope.

@BaranTheBad

Жыл бұрын

It's intentional. You can drop heavy parts and tools all day long on a hard packed dirt floor and it wont do anything to the parts but try that on a cement floor and your gonna damage something and it much easier on the feet than a cement floor. The wester world just has a hard on for covering everything in Concreate. The Asian Squatting also means that they can get close to their work on the ground so they don't have to have a lot of work benches.

@horstmuller7512

Жыл бұрын

Working and living in the dirt must be a religion thing.

@scottvincent7666

Жыл бұрын

Is it possible that concrete and work benches could be taxable items?

@nainitalism

Жыл бұрын

You prefer to stand n work we prefer to sit. Is that a problem for your holier than thou attitude

glad to see everyone has on there safety sandals

Got to love the safety flip flops

@kellytaylor3134

Жыл бұрын

ye the new technology invisible steel toe cap 😄

Good job guys, I like when the boys are there learning. That transmission has many parts and certain direction for most. You guys have repaired many of these in the past. Good to see you keeping the parts clean. Nice work!

IMPRESSIVE, TEAMWORK, DEDICATIONS AND COMMITTED TO DO AN EXCELLENT WORK. ALL WAGES ARE WELL EARNED.GOD BLESS YOU ALL.

Amazing! All tolerances are less then 2 fingers!

I can't believe they can remember how all the parts go together. It's pretty amazing they can do this with such limited tooling.

@Nothingmore71

Жыл бұрын

i wonder who the hell taught them about machining and heavy equipment mechanics

Felicitaciones a estos maestros,cuanta experiencia junta,saludos desde la CD de MX. en America del Norte. 20 de Julio de 2022.

Son una maravilla estos maestros, me apasiona ver sus videos. Ellos simplemente trabajan, y ya, listo.

These men amaze me sledge hammer and 2 wrenches Respect my friends 🤛🇺🇸

Got to respect these hard working people they always get it back together and never no waste good mechanics but I never see a torque wrench wonder how they do a preload on the bearings

@rashedngadze8853

Жыл бұрын

It goes to show that torque wrenches are meant for maniacs to avoid bolt shear and plate warping during assembly. Also these guys discovered preloading bearings is a waste of time, nothing happens if its not done.

This is sooooo impressive. This video just goes to show you what a really good team of men working together can accomplish. Thanks (from America :)) !

Hojala esos mecánicos valoren esa coordinación mental k tienen. Y esa retentiva para volver a armar. Saludos desde HONDURAS

Me gusta el trabajo que realizan a los coñazo sin las herramientas adecuada muy buen trabajo los felicito a todos los mecánicos

I wouldn't have believed it, If I wouldn't have seen it. How these ambitious young men, where cleanliness is next to impossible, rebuild a sophisticated CAT transmission with basic hand tools and the ever present big hammers. Very good!! Thanks for showing us how it's done.

Good Jobs Rebuilding transmision wheel loader Caterpillar 966D, successfull always 👍🙏

@lo2740

Жыл бұрын

successful as it complete failure.

one of their cleaner rebuilds,still use that magic rag.🙂

excelente trabajo en equipo

Nice job 👍

CAT charges $50K for this repair. Three Hooba Doobas in sandals with a couple of wrenches, screwdrivers, pry bars and big hammers charge $43.69.

@1k20a

Жыл бұрын

these dudes work for the original parts they pull off lol. resale them

Amazing Love from new York.

The kid may no have videos games but who need them when you have real hero’s teaching a real job !!!! I wish all the teenagers have vision to be someone in life specially in country’s sub ……..his must be proud of him I would!!!!!!!!!🤫

Bravi ottimo lavoro al prossimo video un saluto Gek

great job guys

Teamwork like a moe foe. 👍

That's pretty impressive. If I were doing it I would be very concerned about having a few parts left over at the end. And who needs torque wrenches when one has a calibrated elbow... Also goes to show that a bit of dust and grains of sand are no problem at least for some transmissions. Looking at that one bearing, it seems someone forgot to maintain fluid levels. That can get expensive. I'm surprised that it looks like they didn't replace more bearings, such as those on the planetary gears and on the clutch center gear. Someone should show them the trick for using the old bearing to install a new one. It's a lot easier on the bearing.

@decoysk

Жыл бұрын

no torgue wrench needed. its 2 grunts for the small bolts 3 for the medium bolts and four for the large bolts..

Those guys at the parts washer station have very impressive safety squints.

Parabéns 👏👏👏 Ótimo trabalho!!!!🇧🇷

Someone needs to invent tables over there

Nice job..even without safety shoes

I love the press to get the parts apart just three guys lift and slam it on the dirt floor !

It's like watching a horror movie.

Great job on the repair

Hammering on bearings. clutch packs in the dirt. Bearings in the dirt. Sanding next to bearings. Bearings worn flat. Torching bearings. Not even a toothbrush available to clean the grooves. No micrometers or feeler gauges. At least they have some compressed air! If it doesn't fit, get a bigger hammer! Oh, the backaches!

Vocês sao otimos. Falta pessoas aqui assim com essa vontade pra fazer alguns trablhos mais dificil assim.😳 Brasil manda saudaçoes

Excellent.

Ótimo trabalho em equipe.

Amazing best video.. awesome..! Thank you for sharing this best video.. success always greetings from traditional Indonesian gold seekers ❤️🇲🇨🌷🌼⚒️⛏️✋👍👍👍

Muito bom ótimo vídeo

Super nice.. Please full cleaning video..

เรื่องงานซ่อมเก่งมาก ทั้งๆเครื่องมือทุ่นแรงน้อย

👍👍👍👍👍凄い技術ですね。🙌🙌🙌✨

Es admirable como desarman y arman una compleja pieza de ingeniería, pero poner engranes a punta de golpes?

nice skills

Imagine if they had a legit shop with all the best tools to work with? They would probably have this job complete in half the time. Definitely, pros, look what they can accomplish with the limited resources.

@livingmaga6299

Жыл бұрын

There's 5 of them on 1 transmission job that 1 man in United States does by themselves. What really impressed me was lol, no 1 was missing a Tow in video! 👏🤘

Anyone can disassemble a machine, clean the parts with a brush and put it back together. I’ve disassembled stuffs myself, that I don’t know how they work. Fixing the root problem is another story

I didn’t see a single new part go into that

i love how they keep everything nice and full of sand

That drive pinion is in rough shape, ouch.

Подшипник по ходил бы ещё) у нас тут всегда делают

Me puedes conseguir un vídeo de la transmisión de un cargador frontal Belaz 78221 él desmontaje de la transmisión y desarmado de todos sus componentes los felicito son muy buenos mecánicos

I understand there is not a lot of money going around for an air conditioned shop. But some clean work area’s would really help the quality of the rebuilds.

Great Pakistani Master he memorize all the fittings done by Komatsu"

Vocês são muito inteligentes dom abençoado

@ultra-rural

Жыл бұрын

o dom de nao morrer de fome né

These workers are impressive. buy some concrete for a floor to remove some of the dirt contamination.

Good ii boss 👍👍😊

These guys are amazing no book no sofisticiuf tools just there bare hands to take apart a heavy duty bulldozer part ! Amazing ask someone in U S A to do the job ! No lift No concrete floor dirt floor most people will laugh at you ! Not even a fork lift ! Just a chain hoist ! Amazing ! So far !

@lo2740

Жыл бұрын

there is nothing amazing in that, it's total amateur hour and ridiculous.

Very professional work, Truly amazing engineering/production 👍

@TheNorthsquad

Жыл бұрын

are ¥ou kidding me

@jrondyer1049

Жыл бұрын

That previous statement was written by a very knowledgeable individual. Lol

@lo2740

Жыл бұрын

the comment of an expert in the field, obviously.🤣 also, engineering has nothing to do with a litteral cesspool "mechanic" shop, doing everything possible wrongly.

Ausgezeichnet 👍👍👍👍👍

Very skilled 👌

👍Good

Nice job guys. How long did it take?

You have the old bearings sat right there which are perfect for using to drive in the new ones, but instead you guys pound directly on the new bearings with a hammer. Suppose it keeps work coming into the shop...

@lo2740

Жыл бұрын

if it was the only problem, lol. Why all thse pakistan indian videos are always exactly the same, these guys have no clue and do everything wrong, they also have no tools, how could a shop have no tools in any part of the world, its not about money because they are a business, they necessary charge the parts, also sine the country is very poor the good are also cheap, they could certainly afford the proper tools and work correctly. SO the only conclusion is that, in some part of the world, with certain mentality, that is just how things are done, and it suits them.

I wonder how many times the same gear train has been rebuilt and how long between rebuilds.

THE SPARE PARTS CAN BE PUT BACK IN NEXT WEEK WHEN ALL THE UNTORQUED BOLTS FALL OUT AND IT COMES BACK IN FOR A NEW VIDEO .....LOL

Any body notice that lock ring ? much abused many times of and on . Next month it will be apart AGAIN !

Those wrenches take a beating...literally.

Apparently rebuilding dozer transmissions requires hammers... Lots of hammers...And Mountain Dew assembly lube...

@RVMD95

Жыл бұрын

All the sand coating the finely machined internal parts comes at no charge.

@lo2740

Жыл бұрын

that is kebab grease inside, mixed with sand.

Браво

why dont you have a tarp over your work area to block the hot sun?

I heard that MountainDew is too aggressive to clean parts from the transmission. :P

a tonne of sand in the bearings always helps in these countries.

Where can you buy those sandles

👍👍👍👍👍👍

ab 22:47 wird es wirklich interessant, solche Fachkräfte fehlen uns hier auch noch :-((

👊😉

WHEN YOU BASH THE BEARING IT MAKES THE RUN MUCH SMOOTHER AND LAST TWISE AS LONG .🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣

@lo2740

Жыл бұрын

especially when you add the sand afterwards.

And here we are with all the extra ratchets and sockets, we never touch, and they take all these transmissions and engines apart with hand wrenches and home made hammers. Just amazing 🤔🤔

So did we see why it was slow to engage? er no.. apart from the square roller bearing everything looked ok. Thats the beauty of the big old Cats, they can be repaired in the field with the most basic of tools, especially when you use a pair of circlip pliers as a crow bar to lift a clutch plate.... $64k question, did it run again when refitted and how well did it work..

@chadwickalexanderjr1758

Жыл бұрын

I too was hoping to see said dozer after repair.

@stewatparkpark2933

Жыл бұрын

@@chadwickalexanderjr1758 966D is a front end loader .

@lo2740

Жыл бұрын

it ran for a wekk, which is quite a performance for the country.

Gears and axles have a limit to the load placed on them. If you have ever seen them load a truck or bus with people and things you can understand why they have a constant problem with gears bearings and axles.

Gollum trying to get his precious at 8:00

hey guys, my respect, you are good specialists but why do you always work on the floor, don't you have tables?

I wouldn't even consider putting a precision component in my equipment literally rebuilt in the dirt.

How many hours did this work last? I am from Iraq 🇮🇶..

@lo2740

Жыл бұрын

35 minutes.

When it came time to put it back together, they had no clue what bolt went where. So they didn't put the bolts in at all. That transmission never ran again.

Дядька который яйца чешет в кресле -это эффективный менеджер?

@ziyodmullaqulov3079

Жыл бұрын

Кот

I changed a headlight once,

Werkbank fehlt in der Bude ?

Enjoyed watching this. I take it the bloke sat in the chair scratching his balls was the boss?!*

Святой молоток 🔨 а подшипник где лязгули ,должны были сами сделать ,новые то и я поставлю.

This is automatic transmisision ?

Jesus you would think they would at least us a bench instead of squatting and ruining knees. Crap doing a trans on a dirt floor, smh. You think they ever heard of brass for beating on steel?

I wonder what the Cat. Techs are thinking if they watch this.

@chadwickalexanderjr1758

Жыл бұрын

Anyone who's ever rebuilt a carb on a Briggs is cringing right now!

@denistierney4642

Жыл бұрын

The reply is not printable

At bevelop west we pay a lot of money without reason.

Imagine what these people could do with real professional tools!! ARE YOU LISTENING CATERPILLAR?????

@horstmuller7512

Жыл бұрын

Teach them reading and they will build rockets.

@lo2740

Жыл бұрын

they could do nothing, because what they do it is total amateur hour. Plus, its a shop, a commercial operation, even in pakistan tools and concrete floro and table do exist and any commercial operation can afford them, the problem is mentality, that is how they live, and "work" and they like it.

get these guys some makitas atleast holay

Caterpillar could learn a few things from these guys... those flat bearings might of been the cause of failure, ya think...

@chriscur79

Жыл бұрын

The flattened edge bearings you speak of are one way clutches, a sprag to be specific

@chriscur79

Жыл бұрын

Whoops. Just saw the flat bearings! Lol ok take the sprag comment back! The first ones on reaction center supports were sprags though!

Nice safety shoes guys....LOL - i dont want to know, how many death and injuries they have every month

11:23 Is this washed with kerosene?😳

Caterpillar will be surprised how easy to overhaul cat transmission with out a manual reference