VERY GOOD recovery service, BUT current is passing through the lathe spindle bearing, which will damage the machine. THEY HAD TO GROUND THE PART.

Absolutely fascinating! Say what you will, this man is a craftsman, great skills! Well done!!!

Beautiful machine work.

Muito bom mesmo este trabalho que vocês fazem parabéns 👏😊

I think this guy makes more money from KZread than as a machinist,

@rabahdifallah2205

17 күн бұрын

There is a big difference between a mechanic and an engineer who makes spare parts. There are precise calculations. This is called a machining engineer

@user-nj4uf3bi8q

10 күн бұрын

Они помогают людям! Вот в этом, кстати, и есть смысл коммунизма. А Вам лишь бы денег сорвать.

@Muotaman9958

4 күн бұрын

KZread barley pays ANY Money. They find always a Reason NOT TO Pay!!!

@thepubliceye

4 күн бұрын

@@Muotaman9958 I have friends that make over 60k US a year.

Everyone crapping on the work and manner in which it's performed need to keep in mind that knuckle is probably from a truck built in the 60s. They have no choice to replace it , probably none around and can't afford a new one if they even find one.

@ptv1250

12 күн бұрын

YOU CANNOT STICK WELD CAST IRON TO HOT ROLLED PLATE. IT DOESNT WORK! NEVER HAS! NEVER WILL! You can only braze cast iron and even then you have to preheat the material. This will never work!

@vetrieska11

10 күн бұрын

it's from an excavator, not truck. And we have quite similar in new machines, they don't change so much through years. so availability is not an issue a think, but the price is. I bet over $3k for this part.

This guy is a Master of His Trade.....

銲接的面積不夠抵抗強大的扭力！

Что за мода пошла все на резьбы и сварку. Резьба обычная не обеспечивает необходимый натяг деталей. Я понимаю если-бы резьба была конусная, тогда еще куда ни шло, а такой способ ремонта это полный провал. Только ради лайков.

@dankovalev257

18 күн бұрын

strengthen the thread with brass solder

@georgegonzalez2476

10 күн бұрын

These poor guys have not gone to any kind of post highschool technical Institute. They have just picked up a few tricks watching other older unskilled welders and mechanics. They may be doing their best, and what they do sometimes looks impressive. But in reality it's bodge and dodgework. Only feasible in a place where there are no laws or courts or government standards.

@masters_of_Kherson

2 күн бұрын

Без синей изоленты работать не будет 😂

Great job.

جميل جدا مزيان بزاف رائع اللهم صل وسلم وبارك على سيدنا محمد وعلى آله وصحبه أجمعين ❤❤❤❤❤

Nice job, pretty sure it won’t break again from the same place. Try to use work gloves !

very expert and preciciion

hega a dar medo ver o que essa gambiarra pode causar.

巴鐵師傅真的技術高超，簡單工具，配件决少，一樣可以完全修復

ارفع لك التحية والتقدير

These guy's overload everything.

@paulkurilecz4209

16 күн бұрын

If it is worth loading, it is worth overloading. 🙂

@edwardmartinez9459

11 күн бұрын

@@paulkurilecz4209 That's why your truck's are all down not to smart illogical statement.

@paulkurilecz4209

11 күн бұрын

@@edwardmartinez9459 Its a joke son. I say, its a joke.

@edwardmartinez9459

6 күн бұрын

@@paulkurilecz4209 Was this a comic channel or repair channel as for me being your son that is illogical there is no extrapolation of logic.

@paulkurilecz4209

6 күн бұрын

@@edwardmartinez9459 Did you ever hear of the cartoon character Foghorn Leghorn? It was a characteristic line of his.

Overloading vehicles can feed a bunch of good mechanics. Keep on with the heavy overloading!

Przepięknie jest to zrobione pozdrawiam serdecznie 👍👍👍👍👍

@Jarobart2

9 күн бұрын

Przestań pisać głupoty, to się rozpadnie w kilka sekund, jak można spawać odlew ze stalą.

@yahenp2084

5 күн бұрын

@@Jarobart2 Wszystko będzie dobra. Pomalowali go sprayu. +50 do wytrzymałości. :)

goo work

Aqui no Brasil esse serviço chama-se Torneiro Mecânico. Não conheço em nossa região alguém que faça um serviço desse tamanho com essa qualidade. Parabéns

Nice machine work but don't think it would stand up to much load

Fist you see all the voids in that weld and freak out. Then you think to yourself: It is a threaded joint, the weld is there just to keep it from rotating; its gonna hold. Then you notice the gear teeth and realize that the load path is rotational, not axial... What happens when you try to turn a nut loosely screwed on a bolt held in place by a chewing gum?

@user-fq1wu9hm4v

Күн бұрын

使用1分鐘就故障🤣🤣

Well done.

عمل ممتاز جدا جدا وعاشت اليدي ❤

Soportara esa pieza el mismo impacto al que fue sometida cuando se rompio esa pieza ya presenta fatiga de matrial la sodadura no reemplaza bien al conjunto de la pieza la soldadura no reemplaza al toal de la pieza ¿ Cuanto durara esa reparacion ?.Ahi hay que reemplazar la pieza por otra igual..A la vista es un buen trabajo.

Super , what is the welding rod you use to weld mild steel and castiron ??????

Awesome way to repair that broken part , thank you .

Оно чугунное!!! Оно отвалится

Excelente serviço! Parabéns!!

Bahot shaandaar kaam hai aapka

Trik yang digunakkan sangat sempurna

not to nitpick, but I personally would have taken a little bit more time in welding that adapter. I saw too many voids and inclusions. Not good where water is a potential concern in the environment. Allows for easier egress of water into the weld seam thus oxidize/rust build up, thus failure/breakage yet again. If its worth doing, it's worth doing right - the first time.

@orlandosoto6080

4 күн бұрын

And the man will keep his job, that’s how he makes a living as long as it keeps breaking he keeps eating 🤷

Verdadeiro gambiarreiro!!

Апо мне а с техникой я с далеких 70 прошлого столетия то мужики молодцы ни чертижей ни спец приспособ и делают чудеса

@eieipaing5923

2 күн бұрын

Tjyýxqevbcchhch7v

Melhor do que o original 2*

Sungguh mengagumkan, idea dan kerja yang sempurna

You are a genius

I enjoyed the beautiful job ,you have done

BRAVO !!!

You do amazing work ,I would love to own that large lathe,

Hola meparece que la rosca no es muy aconsejable para guía y el material original parece fundición y el que puso postizo es acero la resistencia no es aconsejable me parece a mi

Excellent

Kann man das überhaupt machen ,Gusseisen und Stahl schweißen?! Aber sonst eine sehr gute Dreh-Arbeit. Danke für das Video.👏👏

عمل جيد وافضل من البلاد عمل مضبوط

Интересно🤔💭 сколько продержалась такая пор.... фия

I thought it wouldn't work...then he painted the rust and I knew it would work just fine. It's those little details that bring a job together.

But what about the root of the seam, boil it so that there are no pores?

КЛАСС!!! Да у них там всё равно, что сталь, что чугуний - варится одним электродом и обрабатывается одним резцом. 27.00 - завели Виману...

الله يعطيك الف عافه انت باكستاني

Are those safety sandals?

When welding in the lathe, always have the earth clamped to the part, do not send the current through the bearing, this can seriously f**k the bearings!

@thepubliceye

22 күн бұрын

I have rotary ground on the spindle, just like a weld positioner I bet they do also given they do this type of repair every day.

@MatthewTinker-au-pont-blanc

22 күн бұрын

@@thepubliceye I doubt it very much ! Not many people know about the risque. I've worked with Pakistanies, great guys, but they have a different mindset !

👏👏👏👏

👍👍👍

Ловко!

👏

well done ! Can you weld cast iron?

Should have "V'd" weld pathes for penetration. He cut the weld off.

Esse cara é bom na restauração e recuperação. Se fosse no Brasil ja teriam descartado a peça e mandado comprar uma nova (sistema americano óbvio) .

Không thể tin được thật đấy

ما شاء الله

Very impressive repair. How did it hold up?

Seems like the inner of the larger plate should have been welded as well, larger perimeter is now the weaker area. While threaded, still not a bonded joint...

@workingmanGW

10 күн бұрын

agree. would be stronger

суровый ремонт. Хз надолго ли. Токарь молодец

Золотые руки.

If ya squint, it's mint!

have not seen you for a while was worried if you were okay

Wow! Great work! 👌👍

Why does he thread everything rather than make fittings?

Сказать нечего мастер профи

Робота бездоганна, блискучі розрахунки. Але як зварити чавунний корппус з металом, а потім метал з чавуном я не зовсім зрозуміло. Чи може особливі електроди???

Top demais Excelente profissional 👍👍👍👍👍👍👍👍

ótimo serviço !

For me that piece will be short-lived 😁😁😁

Nice repair, but you don't have brake on this wheel any more. steering axle = probably front (if not all wheel steer), so not nice. Hope that excavator don't travel to fast.

Вроде бы ребята понимают, что и как надо делать, но делают так себе качество....

@bobhenry6159

17 күн бұрын

so-so bad, right?

@greenhat7742

17 күн бұрын

@@bobhenry6159 Not bad but not good either.

Nice work but the attempt at a paint job was a waste of time.

And a good coat of paint will cover a multitude of sins

The spray paint makes up for the welding 😂

PAJAMALAND

whowwwwww

What a disaster, I guess it fail after few seconds. And paint on greasy surface?

@Bugsy0333

7 күн бұрын

Comming from a hack !

I think everyone is missing the point! The videos are made for entertainment only that’s all and remember where the videos come from 🤷

По виду, стружкам и звуку металл чугун. И он варил электродом без присадок. Надеюсь это не ось машины.

@user-tr6uk7ru5y

9 күн бұрын

Ну а что же это ещё если не ось. Это ступица.

@user-jn4ck6us6s

8 күн бұрын

У них специальные электроды по металучугунию.

😷🤒🤒

How did he put the threads in the pieces ?

@Chocolazulu

19 күн бұрын

Simple he cut the OD and ID threads duh 😵‍💫

Маладес

perfecto - you are the last hero's, in europe thay can yust change parts 😢

@johnmalenchek6597

18 күн бұрын

Ever wonder why there are so many one armed machinists in Pakistan?

The arc soldering need really improvement to make better job and as already said, the V shape pathes would be welcomed and needed. I don't think it will be able to handle as much load than before it broke. Anyway, interesting to see but so many Not well done details.

here in indonesia that repair cost more higher than buy a new spare part, therefore here the lathe mechanics are not creative..

Looks good but I don't think it's going to hold up I'm like the rest of the comments that is a joke the way they're doing that if it makes it through the first two days it would be a miracle

Overloaded?? Its not loaded until its overloaded!

Inadequate. Non-compliant. Insufficient. Shoddy. And worse. The welding is not up to any standard. The little bit of shallow threading plus shallow welding, that's not sufficient. It's going to break again, and perhaps the first time it's loaded down.

I am sure glad they won't ever be using my lathe, since they think it's ok to weld through the bearings.

Мастер "Золотые руки!"

Prvi ki bi varil na moji struznici, bi letel skozi zaprta vrata.

不理解这样根本不坚固，为什么不放进去两边切斜角焊接

The thread is pointless!

You do realize that welding cast iron to a hot rolled material goes against every single rule? This video is an absolute clown show…The only thing he should be making there is a clown cart to ride around in. The axle housing already cracked from being overloaded. Does he think that one bead of stick welding is going to hold that together? This is hilarious😂😂😂😂😂😂😂

@Jarobart2

9 күн бұрын

But thanks to paint on greasy surface it will last few seconds longer. 🤣🤣🤣