Happy Birthday!!🎉🎉 Thanks for watching!!

@Spacecruizer203

2 ай бұрын

Royal purple is good but it's dark so when u empty it u can't really tell what type of smoothy it is I always bring l left over oil to the mechanic shop so they can recycle it 🫡

Hope you're feeling better now after surgery Willy🙏, glass beads really makes a mess. I've been wiring in a 220v receptacle in garage to run a near future new 180A mig welder. I've never worked on a Briggs.🇺🇸

@DIYWilly

2 ай бұрын

Hey Lou-eye, I haven’t had much experience with Briggs either but I really like this engine on the minibike. I also need a 220v outlet on the other side of my garage. I want a Ac/Dc TIG and plasma cutter. You’re doing it yourself? I was thinking about it. I did 220 to the back yard for a hot tub and it worked. Nobody got hurt..😂 Thanks for watching!!

That’s 79cc Intake is so cool to look at! Fancy! I’m still rocking the 79/99cc engines daily. Getting them ready for Portland. Gotta make the engines reliable up to 100 miles without failure.

@DIYWilly

2 ай бұрын

Hey Elijah, Good to hear from you. I really like those manifolds also. I just purchased a AC/DC TIG machine and want to start making more manifolds. Have a great time in Portland. Looking forward to the video. Thanks for watching!!

@ElijahMiniBikes

2 ай бұрын

Lol, I’ve been learning to weld. Got myself a really rough shaped Tig welder maybe could get it working for minibike/go kart stuff. Finally can make those pesky intakes for those Briggs flatheads!

@DIYWilly

2 ай бұрын

Enjoy the welding machine!

Hope you heal up fast Willy we have had almost 5 inch of rain past 2 days been hard to work on anything and hole crew is at house today for my 41st bday to help me clean garage and tool room and organize stuff so I can nock out a few builds I didn't want anything for my birthday but some help getting garage and tool room together got some ribs in the smoker can't ask for more

@Spacecruizer203

2 ай бұрын

Happy bday heathens 🎂

@heathenprojects2639

2 ай бұрын

​@@Spacecruizer203was a pretty good day

Willayyyyy hows it going Sir glad your doing good

@DIYWilly

2 ай бұрын

Hey man it’s good to hear from you. Hope you’re doing well!

@Spacecruizer203

2 ай бұрын

@@DIYWilly all glory be to the gods 🙏

Good stuff DIY Willy! You'll need to find a Briggs with the model number beginning with "13" like a Model 130202 so you can use those 5 HP race parts. The first two numbers of the model number are the cubic inch size of the engine, so a model 130202 would be 13 cubic inches. The 3.5 HP and the 5 HP engines share the same exact piston but the block size and crankshaft stroke are different. I've got race parts on the shelf for a 5 HP Briggs build as soon as it gets its turn on the bench.

@DIYWilly

2 ай бұрын

I didn’t know enough about Briggs engines. Went out and bought all the billet shining stuff only to find out it won’t fit. Guess I’ll have to buy another engine. I’ll look for what you suggested. Thanks for the info and for watching!!

@heathenprojects2639

2 ай бұрын

I got a old methanol Jr it came off tj rail when we sold it I've thought about throwing it on a mini bike but the 40ish fpt be a little rough on most mini have to do a live axle swap for sure 😅

@DIYWilly

2 ай бұрын

@@heathenprojects2639Sounds fun but dangerous

@heathenprojects2639

2 ай бұрын

@DIYWilly ya the rail it was on weighed about 400 with tj in it and launched pretty violent in the first 60 foot it would pan out fail flat at the end of the 1/8 his best was 7.90 and 86 mph my buddy fox body ran in the 9s and tj would talk so much smack to him I'd roll around laughing as he turned red and tell me control your kid 😀

@DIYWilly

2 ай бұрын

😂

09 at the beginning of the model number means it’s a 9ci block. That means it’s A 3.5hp engine. There is no such thing as a small 5hp Now that engine can make 5 or more. Performance parts for the 9ci engines exist but are kinda rare and expensive. Look on eBay for a “mod 9” connecting rod. They are the strongest stock rods you can get.

@DIYWilly

2 ай бұрын

Hello jldwolfe, Thanks for the clearification. I’ve been round and round with what this little engine is and all I could find was 5hp from a snow blower. Really sucked that I couldn’t find parts I wanted. I will look up “mod 9” and see what rabbit hole I go down. Thanks again and thanks for watching!!

How much oil do i put in a 125cc pitbike willy do u know by any chance?

@DIYWilly

2 ай бұрын

I wanna say it’s a 1 1/2 quarts. 10w40 motorcycle oil Always check the dip stick when filling

@Spacecruizer203

2 ай бұрын

@DIYWilly I put 1 litre and the dip is saying full when I drained the shipping oil it only filled the quart to the 28 mark idk mabey they didn't put the exact needed amount thanks again willy 💪🏼💯