鑫元鴻的輪組以前很超值，很耐用，早期用在捷安特廠車輪組上，我老車上還有一組用到現在。原來鑫元鴻從輪框、鋼絲都自己生產，大部份鋼絲都用協達或是DT，花鼓鑫元鴻也都自家的，不是用昆騰或是喬紳，怎麼一點錢都不留給別人賺 XD。國產就給讚啦！

so much pride in manufacturing, great work.

曲老闆聽著， 我見過的最好的自行車車輪製作， 非常最大和最好的結果,,,👍

I think a lot of people have ridden Formula wheels and hubs without ever knowing it. Great company.

@Minwary

5 ай бұрын

These are not Formulas

@Eseckiels

5 ай бұрын

@@Minwaryit’s says it right at the beginning that it’s the formula company

@AnotherMrLizard

5 ай бұрын

Most cheap bikes that have unbranded hubs are formula. Never see them otherwise in the higher end, with a cheap rim and a cheap hub I don’t know why they’re 1500.

@Jean-jk4zv

5 ай бұрын

@@AnotherMrLizardand you can see them applying a layer of carbon onto the al rim… what a scam

@itsjustpizza

5 ай бұрын

@@Jean-jk4zv Better call HED and tell them they're scamming people lol

Impressed by how manual the process is. Especially the carbon wheel.

@robinbantigny8640

3 ай бұрын

Hence the justified high price

@metricstormtrooper

2 ай бұрын

Fake carbon wheel.

@l.k.1011

2 ай бұрын

@@metricstormtrooperMy first thought as well.

@benturp3492

2 ай бұрын

Those rims did not look like high price ones 😂​@robinbantigny8640

療癒！讓人目不轉睛默默地看完了~

看製造過程會讓人想買，好的碳輪輪一直都是騎車人的夢幻逸品。

@kislovdmitriy

3 ай бұрын

Это не карбоновые обода. Это алюминиевые + плёнка.

Класс! Производство на высшем уровне 👍

Beautiful production line, these wheels are made with such care and pride, no wonder they are so expensive.

這是一個好工廠

와 멋지네요~

鑫元鴻讚

What amazing technology

Impressive operation

😎❤️🇹🇼‼️the bicycle kingdom!!!

And i thought some of my rides were monotomous. I have a new apprecition on so many levels.

原來是XERO 以前用過 鋁邊碳刀 不錯 .

OK I promise to no longer complain about the cost of a new set of wheels.

Fascinating! It was a good study to make me further appreciate my bikes :)

훌륭하네요

I hope the workers are safe. I see a lot of gloves that can be caught up and pull hands in the machine.

@szczuraki

Ай бұрын

Zobacz sobie ja wyląda produkcja w indiach😢

Nível superior ❤

That scott time trial bike at the end was beautiful

대단하네요 타이완의 자전거 기술력은 역시 세계최고입니다❤

@lemon_films

4 ай бұрын

감사해요🥰

Champion ! Give the taste to own this bike . Have a nice 2024.

Excellent work ❤👍🤝

알루휠 만들다 카본원사가 왜 나오나 했더니 저렇게 만드는구나 갓구운 카본휠 맛있겠다

Good job ❤

Good video, I like since the begining until the final and the keep in details in all the process of manufacturing. Greetings from Peru - Southamerica (march 22, 2024) 🇵🇪😉👍🏻

fantastico video muy bueno. gracias

Just incredible! Thanks for uploading.

@lemon_films

4 ай бұрын

Thank you🥰

❤❤❤❤❤❤

Very cool to see. Hubs on my mtb are formula and wouldn't be surprised if so are the wtb rims.

産業革命は偉大だ

Обода делали одни а на велике уже другие! Фокусы они такие! )))))

عجيب جدا. صناعة رائعة فوق الخيال 🌴🌴🌸🌸

Saya bekerja di pabrik yang sama

무척 신선하고 도움이 되는 영상입니다.

😊😮 fantastico lavoro,bravissimi

原來是公路車 看到一半就發現這東西不簡單 當然價格也非常不簡單...

Tremendous amount of hand work is surprising.

え？アルミリムにカーボンファイバー貼ったなんちゃってカーボンホイールってこと？それでもまぁ工程とても興味深かった！

@user-gv5pg9yb9q

4 ай бұрын

アルミの型にカーボンテープを貼り窯で焼いて成形しアルミの型を外します。

I saw a very crucial step！

Thank you for posting this!

@lemon_films

4 ай бұрын

Thank you🥰

멋지네요 굿~ 👍👍

OK 🆗 WELCOME TO BOGOTA DC COLOMBIA

Wow hermosas❤

😊 Vielen Danf fürs Hochladen - bin Maschinenbaumeister und Fahrradfahrer - das Bike gefällt mir sehr. 😊

@lemon_films

4 ай бұрын

Thank you🥰

Xero の １０Sホイール昔使ってました！

That was a wheely good video.😐

@lemon_films

4 ай бұрын

Thank you🥰

@JamesSmith-qs4hx

4 ай бұрын

@@lemon_films based 🙏

如能大量平宜就好，好有興趣租用-一試。😂

Nice work.....

Yep, specialized places a sticker on, marks it up 100%, and calls it a day.

Интересно

Very good! 👏👏👏👏

Nice

見た目はカーボン、中身はアルミ？

Quality production, patience and care. I knew if couldn't be Mainland China - because there would be spitting, filthy conditions, poor quality, waste and out-of-date machinery. Obviously this was Taiwan: efficient, civil, skilled, honest, quality. Two entirely different countries, two different nations.

wow that's a lot of precision tech

Прикольно

nice

They are made of aluminium covered with a carbon film, which is why they are cheaper than full carbon.

@johnhenrick2298

4 ай бұрын

Thank you. I was wondering why the aluminum rims and then the carbon fiber.

@markifi

2 ай бұрын

i don't think that's right

今では台湾製自転車部品は高級品だからなあ。それでもイタリアやフランス、アメリカ製よりは安いけど。 自分が使っている物も日本メーカーのマレーシア工場製か台湾メーカーばかり（中国製のパチ物は怖くて使えない）

Super ! ❤⭐⭐⭐⭐⭐⭐🌹🙏☀️💐

L’Asie usines du monde

認真工作啊，百萬印工要來了😂

I long for the steel italian handmade frames of the seventies

I wonder if the staff at the manual calibration part of the line have a target of a certain number of wheels they have to get through per shift? Since calibration is the final step in manufacturing, I hope the staff I given time to fine tune all the wheels to the correct spoke tensions.

@fanda6122

5 ай бұрын

almost certainly, i know when they make frames for pro teams they make sure to use the best most experienced workers in the factory and there's no time constraints but what consumers get is the rushed time crunch version

@itsjustpizza

5 ай бұрын

They definitely don't. Nearly every single brand new wheel requires at least a minimum amount of truing and bearing adjustment before being sold.

@JoehnDoue

5 ай бұрын

evidence?@@itsjustpizza

@itsjustpizza

5 ай бұрын

@@JoehnDoue my fingers, a truing stand, my eyes lol. Formula has been around for many years, but this is pretty standard for (as I said) pretty much all wheels. Next time you're in your LBS probe their brains a little bit. These mass produced wheels especially need checked before they go out the door. Not doing so is an amateur move idc how much they cost.

@JoehnDoue

5 ай бұрын

ok@@itsjustpizza

자덕으로써,좋은경험했습니다.휠생산공정도 손이많이가는군요.

interesting to see how carbon wheels are actually more of a hassle to make, and how wheels are actually kind of hand-made. I had in my mind a 100% automated process for some reason.

@MadChalet

5 ай бұрын

Are they carbon wheels? It looked like a wrap put onto aluminum rims, no? Check 4:29

@cegalleta

5 ай бұрын

@@MadChalet I thought it was a mold, never had seen hybrid carbon-aluminum wheels marketed as such before. It could potentially be dangerous if that's the case tbh, because of galvanic corrosion

@Fr3dr1k

4 ай бұрын

@@MadChalet How to make a perfect rim with leaves?? Well you need a mold... here in aluminum, which then goes in the oven. Everything is in pictures... a minimum of reflection

カーボン調のディープリムホイールもフチの部分はアルミなんだね

Beautyful

職人の経験や勘、その日の気分や天候で出来に差が出るホイールよりもこういう設備が整った工場で量産されるホイールの方を信頼しています

👍👍👍

大陸工廠很多可以好好來學習提升製程

мне б такой.

Mr Video Editor you need a redo regarding how the mold works in carbon rim manufacturing.

@permanenceinchange2326

3 ай бұрын

The carbon you see is pre-impregnated with resin and harder. this is stored at low temperatures, so it doesn't cure. The fabric is cut at 45 degrees, and then 2 layers are pressed together (or maybe more). When the layers are put in the mold, a plastic bag is put in, this is used to push the layers against the walls of the mold using air pressure. In the oven, the resin gets cured. (now you know this, watch again... you can see every step)

Me encanto, muy buen contenido 👍

@lemon_films

3 ай бұрын

Gracias🥰

這樣做法精準不高會誤差

tension testing 是应力释放么？

46000台幣阿 好貴但厲害

當你在開趴語音控製要喊過你的音響，智能有時候很好用有時候後也會讓你冒煙

❤❤❤❤

Saludos desde México 😊 Buen video

@lemon_films

4 ай бұрын

¡Gracias!🥰

C’est la fabrication de roues aluminium recouvert de carbone que nous voyons ?

Nice quiet first half…

@russyJ20

2 ай бұрын

Very relaxing

👍

以前曾在做碳纖輪圈的小工廠工作，只能說差好多，自動化機器做出來的速度跟製程，以前工廠做的八成都是手工，根本比不上

Hope you pay youre staff well, given that the cost of producing these wheels is very low and the sale of these products is high.

Ceramicspeed : 8:35; 8:44.

wow this front hubs is the same roval by dt swiss 21 spoke

한국은 자동차 산업으로 전환하며 대만에 자전거산업을 넘겨준 과거가 생각난다...

Nice videos from Taiwan ❤ 10:39 but why standing position? Better to lay down on a recumbent bike. It was forbidden 1934 😣

原來碳纖維輪組的框,還是有個鋁框做基底!

@andrewwarcup684

5 ай бұрын

That's the impression I got, as there was no reference to it been removed.

@zhoujack662

5 ай бұрын

那只是為了貼碳布方便做成型使用，拿進去烤箱時就會拿起來

@lovedrinkbeer

5 ай бұрын

I think the first aluminum alloy rim and the later carbon rim are different products.

@ot1560

2 ай бұрын

@@zhoujack662 可是製程中還在那個鋁框上雷射蝕刻產品編號，而且影片一開始就是產線上大量製造鋁框，怎麼看都是輪組的一部分

3:40 must be to get all the metal shavings out of the rim.

Круто! А разьве скотт делается в китае?

I am curious. Was it poor video editing or were those carbon wheels simply carbon sheets bonded to aluminium wheels? Or was it that an aluminium wheel rim is first produced in order to act.as a template mold and then used as a guide for the carbon layup? Thanks in advance.

@jamesbennett1691

4 ай бұрын

I'm also curious about this... surely its not some kind of alloy/carbon mix as i can't see what the point of that would be

@thetinusnl8834

4 ай бұрын

Glad I'm not the only one wondering. For a moment I thought carbon rims are just alloy on the inside, but I can't imagine that...?

@yukiko_5051

4 ай бұрын

It's alloy wheels with carbon surface. This is why those wheels are cheaper than full carbon wheels

@markifi

2 ай бұрын

it's a poor edit. you can see the aluminium rim being finished and then they cut to a shallow section carbon rim being made in the stainless steel mould. if you don't believe me, why would they first drill and engrave an alloy part that would just be hidden under carbon? it would be an unnecessary step. this isn't what's happening in the video

9:00 some so called professional dealers charge sky high price to build/tune the wheel. The staffs in the factory build 1000X more but get 1/1000X wage

原來碳纖維輪組也有鋁合金材質喔？

@user-xj1if6ml3n

4 ай бұрын

這根本偷料只有貼皮這樣叫碳纖維 偷很大

2:34 Typically there is a piece of steel inserted into aluminum rims at the joint.

@karlwalters3763

5 ай бұрын

Not if they are welded. If they are pinned then it is most likely an aluminium plug.