Primarily handmade, even the speaker driver. Thumbs up to this Taiwanese manufacturer.

@alanrogs3990

Күн бұрын

I hope they reply to questions and/or requests for help with their products via email. Their mainland brothers are very lacking in aftermarket service and help.

@user-fu8vn7xo6c

Күн бұрын

@@alanrogs3990One other point- they are not using political prisoners as slave labor to lower cost.

@alanrogs3990

Күн бұрын

@@user-fu8vn7xo6c I am friends with an audio manufacturer in China and he doesn't use slave labor.

@user-fu8vn7xo6c

21 сағат бұрын

@@alanrogs3990I know that and do not mean everyone there is doing that. Most likely they do not, but some CCP partnered operations do. This is outlawed in Taiwan. Some mainland Chinese companies like Fosi Audio is doing a great job on budget amps sporting Texas Instruments ICs & quality supporting parts. I am selective in what & who I purchase things from CCP China. I have no such reservation with Taiwan at this time.

Out of my 25 years in the glass business, I have only seen one home that had high end speakers. Now had I said 35 years in the glass business I am sure I would tell you I seen more. But what I see is almost everyone uses bluetooth speakers now. And wow very beautiful and well crafted handmade speaker, I think the only thing I could criticize is the screwing of the circuit board to the enclosure without stand offs

@jimtincher7357

Ай бұрын

Actually there was a standoff... it looked like foam to absorb vibration and to isolate the board.

@LausbubDaniel

Ай бұрын

Die Arbeiten wie die Büffel ohne Gefühl

@wally7856

Ай бұрын

@@jimtincher7357 Notice how the board locally flexed once screwed down 12:51 . Inducing unnecessary flex in the brittle board doesn't seem like good practise, stand offs would be better. 10:37 those 2 inductors (coils) should be mounted perpendicular to each other. In their current orientation the magnetic field from one is close enough to induce a current in the other.

@TinNguyen-bw7ww

Ай бұрын

I think the professional level of workers is still poor

@richie4540

Ай бұрын

@@wally7856 maybe its part of the sound design ?

I’m Usher user for 10 yrs, never encountered any issues! Last yr I bought my 4th spk ML802, compare to other I have in the same price, it's an absolute bargain. As a woodworker, those who insist on using wooden mallets are simply not practical. After seeing other high priced spks processes, I must say their crafts is already quite impressive. While there are certainly some details to improve upon, in terms of the finished product and especially sound quality, it's definitely worth it!

@markmalasics3413

Ай бұрын

$26,000 US for a pair of speakers is an absolute bargain? I'll just go in my basement and chip what I need off my collection of gold bars.

タイムスタンプ 0:00 オープニング 0:11 スタート 0:17 エンクロージャー用合板接着工程 0:45 エンクロージャー用合板プレス成形工程 1:12 MC によるエンクロージャー用合板切削工程 2:56 切削加工後のバリ取り工程 3:22 エンクロージャー内装組み付け工程 4:49 エンクロージャー傷取り工程 5:49 バッフル傷取り工程 6:13 バッフル研磨工程 7:02 エンクロージャー外装組み付け工程 8:56 中空コイル製造工程 9:32 ネットワーク組み立て工程 10:45 スピーカーユニット磁気回路組み立て工程 11:10 スピーカーユニットフレーム組み付け工程 11:32 スピーカーユニット振動系組み付け工程 12:31 スピーカー組み付け工程 14:00 スピーカーストローク検査 14:13 バッフル組み付け検査 14:23 測定検査 14:33 完成 所々自信が無い所があるので誤りがあったら申し訳ない😢

@hofct

Ай бұрын

Good job 😃

@lemon_films

Ай бұрын

Thank you🥰

Наколенное производство... Особенно порадовала работа электродрелью, как дядя Миша в гараже... )))

Anybody else cringe when they screwed in the crossover PCB directly to the wood without any standoffs and it warped because they provided no clearance for the through hole soldering underneath? 😬

@bobkos333

11 күн бұрын

I saw the same thing and literally said "OUCH" out loud!

@user-tq1pd6pv3e

4 күн бұрын

Ещё я увидел стальной молоток стучали по дереву, много клея, очень много клея.

12:48 A very Hi-End approach. :D

@102AlienJim

Ай бұрын

nothing wrong here. The tool they are using to screw it in has a calibrated ratchet mechanism so that the screws cannot be over tightened. The boards are extremely flexible and durable as all modern circuit boards are. Go ahead and try to snap one in half with just your hands... It will easily bend 10 times what you see here with no damage.

@PotatMasterRace

Ай бұрын

@@102AlienJim All decent speakers I had disassembled used standoffs.

@johnstuartsmith

24 күн бұрын

Many of the speakers I've dissassembled used standoffs as well as hot glue to attach the crossover components to the circuit board. The inside of a speaker cabinet gets plenty loud and years of vibrating capacitors and resistors will degrade solder joints.

@roverwaters3875

6 күн бұрын

😂😂

The most satisfying tool for me is the air powered caulking (gluing) gun. My right hand asked me "Can we get one?".

@pattygq

Ай бұрын

I don't know what I'd use it for but I need it lol

@teazer999999

Ай бұрын

@@pattygq I've been weatherproofing a house, going through many tubes of calking, and just thinking about it makes my right hand hurt.

Почти как и я в гараже делаю. Только мегафрезера нет!😁

@mrPOCCU9IHUH

28 күн бұрын

Забавно то, что эта шарага, продавая пару колонок за 14 килобаксов, не может обеспечить персонал СИЗами.

@user-lr5qv4xm5g

6 күн бұрын

А ну ка покажи своё произведение.

I own a fine pair of wood veneered Usher 520s speakers. I have had them for almost 15 years. Very good speakers and well made.

12:48 Плату при таком "подходе" к её креплению в результате механически повело! Не долго будет такой фильтр работать.. В скором времени пайки радиоэлементов дадут микротрещины (холодная пайка) и контакты пропадут. Это уже далеко не высококачественно!)))

@genaishivatov1737

Ай бұрын

Согласен (особенно если паять бессвинцовкой, как делает законопослушный, eu-шный Pro-Ject), солидные фирмы не используют дорожки для сигнала - только кусок ламината как основание для поверхностного монтажа "элемент к элементу".

@thinknoob1930

Ай бұрын

согласен

@TheElSonador

Ай бұрын

Там не пайка, а насрано и вообще кроссоверы надёжнее собирать на скрутках.

@user-bq6ym2ee6y

Ай бұрын

​@@genaishivatov1737какие фирмы сейчас это делают, подскажите пожалуйста?

@user-zt3hm4hw8z

Ай бұрын

Тоже согласен. Китай, он такой Китай. Ширпотреб. Высококачественного ничего не увидел.

ML802一直是我的Hi-END，聽2-3小時都不膩

Since 1972'...WOW One year younger than me 😊 Congratulations, and good job !

ฝีมือคนใต้หวันเยี่ยมมาก ตั้งใจทำมาก

สวย เเต่เสียงก็เเล้วเเต่หูคนชอบ

I own a pair of Usher Mini-Two's that I bought in 2012, the construction is immaculate even for this entry-level model. It still uses pretty much the same curved birch-ply construction and internal bracing done with MDF, except mine is satin finished instead of the polished look of the higher end models. I still listen to them up to this day, the price/performance of these speakers are so good, I think I need to spend at least $6,000 to get something that's noticeably better!

Luar biasa .bisa langsung melihat prosesnya.terima kasih

Amazing process, highly precise and durable

I love this! The way they do epoxy at 11:02 is genius!

Trabalho fantástico. Saudações do Brazil.

I've never ( cough) put a screw through a foam surround... Those cabinets are beautiful!

四十年前上高中的我組裝音嚮前後級功放搭配的揚聲器就雅瑟音響🔊。突然想起青澀的少年時代…

@micklee8839

Ай бұрын

同感，三十多年前我十七岁组装了CD，场 效应管BTL功放和音箱，两年的零花钱就没了。

@laplacelaplace4582

Ай бұрын

以前在台北市漢口街有販賣展示店，不曉得是否還在

This is why there is so many people in audio. The profits are insane. I get that it is low volume, but still. The ones being made retail for 14 grand, the taller ones 20. With 1000 dollars in materials and labor, good return.

@ubacow7109

Ай бұрын

There are some that are really high value and little to no profits as well, like Philharmoninc Audio and Ascend acoustics. Philharmonic in particular will sell you probably a speaker that costs him like $3K+ in parts and labor but only makes out like $100-200 per speaker

@niceguy100000

Ай бұрын

I think pro audio has lower profits and much better engineering. Midfield monitors or even main monitors.

@ChicagoRob2

Ай бұрын

@@ubacow7109 Agree - Ascend puts a lot of money into custom SEAS drivers and laminated bamboo cabinets, while competitors are using MDF and cheap drivers.

@ChicagoRob2

Ай бұрын

@@niceguy100000 I have Kali LP-6 monitors, and they are insanely good for $400/pair. Plus, no amplification is required, which adds even more value.

@fwerf5084

Ай бұрын

that's the real bullshit of audiophile audio. price is insane, but such videos confirm there's no rocket science in it. just very well, hand made speaker from decent self made components. definitely not worth these insane money. adam audio monitors (to name of other dozens!!) are relatively well priced and sound just amazing for my needs.

China hat sich sehr gut Entwickelt. Und alle Handwerker im Video sind sehr Professionell. Den einzigen Kritikpunkt sehe ich nur bei der Gehäuse Stärke im bereich wo die Chassis eingesetzt sind. Da würde ich innen Anfasen, wegen Kompressionseffekten. Vielen Dank für das Video😊💚 P.s. Ich baue meine Lautsprecher selbst und habe auch einen Kohlefaser Kefler 8 Zoll Bass von Usher. Extrem Tiefer Bass -3db bei 27 Hz

@jackronin4371

25 күн бұрын

Taiwan not China.

@Ampmic

25 күн бұрын

@@jackronin4371 Ohh sorry, i have thing Usher comes from China

@lemon_films

20 күн бұрын

Thank you from Taiwan🥰

Нужно уберечь Тайвань от коммунистического зла 👍

As someone watching from the US • Watching your videos is most relaxing even at 2 x speed. Hope your customers appreciate the skill talent and dedication of your workers for this very important job for the community • It’s good to see how well you understand the design and layouts of the speaker systems to get the job done efficiently - loads of experience is evident with this skilled set of workers • Watching your people doing a great job make me think there is hope for the other parts of society who don't even try to have a job. Your crew is a great role model for all of us • Thanks so very much for posting and sharing! All the best and God Bless. 🇺🇸

@lemon_films

Ай бұрын

Thank you🥰

This video is so satisfying to watch. Thank you for posting! And I have owned Usher speakers in the past and they are quite warm and special.

@lemon_films

Ай бұрын

Thank you🥰

Que bonito es tener las herramientas adecuadas para ensamblar las bocinas, saludos desde Venezuela..!

Amazing... the best qualitys Made of Taiwan...so beautiful.. enjoy your music with Usher...❤❤...15:12.

@alanrogs3990

Күн бұрын

They learned it from Japan.

Очень приятно смотреть на процесс сборки 🙂👍

還有很多小細節可以再 精進！老外就是厲害在越不注意的地方，越是有 畫龍點睛 的音效，以HI END的角度分析。如果以20萬級距內，他是可以跨獎。揚聲器的調音是哲學問題，當你深入了解，其實就是 陰陽太極的對應！個人研究喇叭，超過15000hr才摸出其中的精華處，可惜 音響行業，還是民族性產業，還是很敬佩 創辦人 阿水大師！

I love to assemble electronics and could solder all day long

Фильтр на плате, динамики стальными клеммами, ну так себе качество

모든 유닛을 자체제작하는지 모르겠지만 요새같이 분업화된 오디오계에서... 중국 말고도 동양에도 자사 유닛을 만들어서 생산하려는 완성품업체가 있네요. 앞으로도 좋은 제품 많이 만드시고 세계적 명성도 얻으시길.....

Should not max torque the screws in until they are all screwed in..also she max torque the screws on one area only..this puts alot of stress on that one area..good way to stripp screws..u alternate diagonally the application..

@ChicagoRob2

Ай бұрын

Watch some B&W videos, to see what true high-end loudspeaker manufacturing looks like.

@MuscleBN

Ай бұрын

First of all your statement is not relevant to My response..I am a mechanical engineer and a hi end audiophile for over 40 years...and be careful about referencing b&w speakers because only the 800 series is manufactured in England and everything else in mass produced in China..and I am not diminishing some of the Qualiry components that come out of China..But emphasing the "mass produced" statement

@tiloalo

Ай бұрын

They didn't show the whole sequence, so hard to tell if she only torqued one or all. Also, the driver used may be set to only reach a set torque.

@MuscleBN

Ай бұрын

Yes, but my point with a heavy driver and a huge magnet structure has a lot of weight centralized initially.so the pull force will be enhanced in that location before the whole driver is installed.also the driver with that much weight should be supported while all the fasteners are attached.Then and only then should they be torqued in a diagonally opposed fashion

@tiloalo

Ай бұрын

@@MuscleBN true, but honestly there is so much wrong in this video that they don't seem to care much...

Шедеврально а скажут чото это хай энд, такого кустарного производства я ещё не видел!

Proses produksi speaker berdiri lantai kelas atas Mantap

Parabéns! Serviço altamente qualificado e de qualidade! Salvador, Ba, Brasil.

Awesome video! In Thailand has Usher importer shop at Fortune 3rd floor. They have many models of USHER spk .

@currytv3012

16 күн бұрын

台灣我 在泰國哪裡？ 喇叭！

@alanrogs3990

Күн бұрын

I'll be there tomorrow at 2pm

looks like they take great care and produce well made product. good work

Showing the process awesome

I love the zero guard cnc. It's as if tools never suddenly explode or machines don't randomly crash, cause tools to explode. OSHA would love this place.

@d.Cog420

Ай бұрын

no gloves, no masks, no vacs on sanders. I've seen people forging liquid metal in India in bare feet too so I guess it's all relative 🤔 😳

Excelente trabajo esa es la razón de tener unos altavoces para salón profesionales tengo un Dali Senzor 7 y son muy parecidos y muy buenos

Vraiment Excellent Merci

Isso não é uma simples caixa de som, mais sim uma obra de arte parabéns pessoal 👏👏👏👏👏👏.

不错不错，我们大陆也学习一下😘

Lovely Lovely Lovely Lovely Lovely Lovely

Un fino estilo para hacer todo muy bien

Marvelous excellent craftsmanship 👍

Шедеврально!

It's 2X speed time! None the less, nice vid The amount of work done by hand is impressive.

@lemon_films

Ай бұрын

Thank you🥰

The speaker was designed to give the most optimal sound performance in all audible frequencies.

I enjoyed watching this video .Some good production techniques. I used to work for Duntech Audio back in the 80s and wathing this brought back a lot of good memories.

Biz teşekkür ederiz.Guzel ve temiz bir imalattı.Bizde hirdavat piyasasında taiwan ürünleri her zaman en üst seviyededir.Kalite BAKIMINDAN.Çin daha sonra gelir..

キャビネットの木材は湿度があってもソコソコ良い物が仕上がると思うけど、スピーカー自体はどうでしょうかね？ 紙では無く薄膜アルミ素材とか使っているのかな？

Nice. I bet these gals can assemble Ikea furniture Kits in world record times 🤣🤣🤣

Очень технологично. Без молотка конечно никуда. 😂

Very nice 👌 👍 👏 😀 😊🎉

看到雅瑟，我也買了一套音響，並想起個人當年的幸福感，如今卻都....，唉！

saya suka prosesnya.dari indonesia.

Завораживает!

@14:10 that test made my sub work

awesome thumbs up

Beautiful ✨️

Superb!😮

C'est très beaux 😍

Very well crafted. I wish if the same can be shipped to India. Now, with Bluetooth speakers there are less wires seen in the homes. Great work.

Una obra de arte esa corneta

I’ll stay with my 1974 Altec Lansing 150 # a pc speakers 15” woofers, horn mid range, horn high freq. all Alinco magnet. Range 10hz to 20 kHz 110 db 1 watt at 3 meters. Low volume to 100 watts just sounds beautiful, superb imaging outstanding voice of all instruments, saxophones are dreamy. sware I can hear the horse hair against the strings when I play orchestra, play Metallica. It’s like being surrounded right on stage with them. Very sweet for 50 yr old speakers

@derekchappell8509

Ай бұрын

These are $15k but that’s the beauty of audio equipment, if you’re happy with your sound then stick with it. After a certain point it’s all subjective anyways.

@DD-DD-DD

Ай бұрын

We care

@remiremillard8419

Ай бұрын

You are absolutely not getting close to 10hz with vintage altecs lol. maybe down to 40-50hz. Not talking down on altec, just want to correct that

@RennieAsh

Ай бұрын

​@@remiremillard8419and certainly not at 110dB one watt at 3m lol

Top quality

Proses yang sangat bagus🧐

I was honestly surprised at how manual a lot of these processes still are!

Parabéns pelo belo trabalho .

nice looking speakers.

USHER音響👍👍👍💯😀❤

bonito audio saludos 😀🔊🔊📣

台灣之光

@laplacelaplace4582

Ай бұрын

台灣的音響剩下沒幾家

Wow, amazing work

必須按讚

@lemon_films

20 күн бұрын

謝謝你😆

This is indeed top craftsmanship! There is only one item I would do differently. I saw that the speakers were screwed down while the cabinets were in a vertical position. I think it would be better if they were horizontal.

@johnstuartsmith

24 күн бұрын

It seems like it would easier to install the crossovers before gluing the front panel on.

super

哇，真棒。来自印度的问候。

Brand is from Taiwan ....Usher!!

Класс👍! Мне на такие колонки не заработать😢

Stunning . many thanks

@lemon_films

Ай бұрын

Thank you🥰

Fantástic

Very Nice !!!!!

Wonderful

Parabéns pelo seu trabalho! 👏👏👏

Veramente belle. Mi piacerebbe sentirle suonare.

Excellent video ! 👍

Шикарно!

I love my B&O's, made with more skills and knowledge

@peteranders7106

Ай бұрын

and worse drivers in tiny cabinets for quadruple the price. Bose is the new Teufel imo.

@wim1366

Ай бұрын

@@peteranders7106 And the trouble is i would wriite B&W (Bowers and Wilkens) i don't know why i wrote an O instead the W (i have the 803)

Sae sanget

Mantap canggih.👍👍👍

Pretty cool

2:06 saw dust extraction would be nice.

Great job! Very beautiful speakers! So interesting all the steps taken until the finished product.

The best looking speakers i ever seen

@user-ol9xb1xw1h

Ай бұрын

Seriously ?... take a look at Bowers & Wilkins Nautilus range over the past 20 years or so, then come back and tell me what you think.

So nice ❤❤❤❤