thank you sir

@ProAcoustics

2 жыл бұрын

Thanks for watching Ryan!

hi, I've just bought a mixer for my band, but the sound is pretty low, so I was looking to find an amplifier for it. what kind would I look for ? we have two mics, drum, bass and guitar.

Thanks for the video. I had a question though. I currently have a 'Harbinger Level 7' mixer with 2 PC's hooked up to it via the Ch 2/3 and Ch 4/5 which lead into the headphone out via a 1/4inch stereo to 1/8 inch stereo cable. When I turn the audio levels up I get a lot of noise, and hear I could hook it up to a powered amplifier somehow to counteract that. I am looking to buy a Shure SM7B microphone to hook into the audio mixer and then into my main PC, but I have no idea on where to start to connect them all together. Any help would be appreciated, thank you.

@ProAcoustics

2 жыл бұрын

Hi Matt, Thanks for watching! We would be happy to help you source a microphone along with whatever additional components you need for this project. One of our sales engineers can walk through the setup with you and make sure you get all the right equipment. Please reach out at 888-256-4112 or email sales@proacoustics.com. We hope to hear from you soon!

Hi! I have a PVI 6500 Powered Mixer. ( that info came from the silver tag on the back). I need to purchase minimally 3 cordless microphones. Would you please tell me what microphone brands are compatible? Thanks

@ProAcoustics

Жыл бұрын

Hi Vanessa, Most any brand will interface with that unit. We suggest getting a multi-channel capable (frequency-agile) microphone to allow stacking up that many mics for simultaneous use.

Good day, great info, but can you help me out here? I'm on a budget and thinking of getting a mixer amplifier for my church. Currently have one Keyboard a bass guitar and a drumset. what do you recommend for me?

@ProAcoustics

2 жыл бұрын

There are many excellent solutions on the market. Depending on your needs, you might consider the Yamaha EMX series, Mackie PMP series, or Yorkville M-Series. We recommend using Google to find a source locally for sales and warranty support. Best of luck!

It is more a question...can we have separate mixer and amplifier connection instead of a combo type

@ProAcoustics

Ай бұрын

Yes, you can definitely have a separate mixer and amplifier in your audio system instead of using a mixer/amplifier combo. In fact, many professional audio setups prefer separate components for greater flexibility and control.

What kind of amplifier do I need to drive 8 ceiling speakers? Usage for living area, kitchen, dining room, backyard.

@ProAcoustics

6 ай бұрын

Assuming your speakers are 8 ohm, you can use surround sound A/V receivers for this application. Please reach out if you'd like assistance choosing the best receiver for your needs. You can call (888) 256-4112 or email sales@proacoustics.com.

I have not been able to get an answer to a question I have about Mixer-amps, so hopefully someone here can enlighten me. Can an active sub-woofer be connected to a line out or aux out on a mixer amp that does not have a dedicated output for a sub-woofer/LFE?

@ProAcoustics

4 ай бұрын

Hey Djard, great question! Yes, you can connect an active subwoofer to a line out or aux out on a mixer amplifier that does not have a dedicated output for a subwoofer/LFE. I hope this helps!

@TheBinaryWolf

4 ай бұрын

@@ProAcoustics Thanks. I found that "Tape" out also works well.

How much watt the mixer amplifier pushes if you connect a speaker to it?

@ProAcoustics

8 ай бұрын

The watts that a mixer amplifier pushes to a speaker will depend on the watts that the speaker is set at. Many 70-volt commercial speakers allow you to adjust the amount of watts the speaker will pull using tap settings. Check out this video where we explain how to choose your amplifier and properly set your speaker tap setting: kzread.info/dash/bejne/X6Ohq7Gie7jYlNo.htmlsi=k9JHajGZ9b8qQKfD&t=86

Hello I just bought 3 powerless speakers, could you provide a recommendation on a product that can take an output from my computer to run on these 3 speakers?

@isaiahdawid4721

10 ай бұрын

the speakers are red/white not single cable

@isaiahdawid4721

10 ай бұрын

2 jbl xti 20s and 1 jbl xti 10 center

@ProAcoustics

10 ай бұрын

Hi Isaiah, I would recommend contacting one of our sales engineers to discuss this further. They will be happy to review your application in more detail and provide a product recommendation. You can email sales@proacoustics.com or call (888) 256-4112. We look forward to hearing from you!

sir if i buy a Mixer profx16v3 do i have to buy a amp to make work

@ProAcoustics

11 ай бұрын

Hi Harold, Yes, you will need an amplifier to power your mixer.

I have double 15" passive loud speakers Weighs 6.8 ohms=800 watts Sensitivity 87db Frequency Response 60Hz 20 KHz Which amplifier should I buy ?

@ProAcoustics

Ай бұрын

Thanks for your question! The Pure Resonance Audio LA21000 amplifier might be a viable option for you. For further assistance or to discuss your specific needs, feel free to contact us at sales@proacoustics.com or (888) 256-4112. We also recommend that you reach out to the manufacturer of your speakers for their recommended amplification.

what's effect if I use mixer without amplifier

@ProAcoustics

Жыл бұрын

Hi there! You can check out this blog for more information on the subject: www.proacousticsusa.com/blog/post/what-is-the-difference-between-a-mixer-audio-power-amplifier-and-commercial-mixer-amplifier/

@nosebleed1242

10 ай бұрын

If the speaker is passive little to no sound will come out

The fact that I don't have enough money I can only buy a mixer amplifier to satisfy me and please what is the use of a cross over?