Power Rack and Pinion Steering System
Автокөліктер мен көлік құралдары
Here's how a hydraulic steering rack works to turn the wheels on your car.
Hydraulic steering has been used for decades to provide assist to drivers turning the wheels of especially heavy vehicles.
Fluid is pressurized by a hydraulic pump and is sent to the rotary valve via the high pressure hose.
Depending on the direction, the fluid is pushed into the opposite side of the cylinder housing, pushing the piston. The piston is connected to the rack, which connects the tie rods and hence the wheels at the steering knuckle.
Its all explained in the video, Thanks
Subscribe for more videos
/ @automotivespot
Other videos to watch;
Working of an alternator (cutaway model)
• Car Alternator | How d...
Working of a starting motor (cutaway model)
• Starting Motor | How s...
Dual over head cam DOHC (cutaway model)
• Dual overhead Camshaft...
Working of a Torque convertor (cutaway model)
• Torque Converter, How ...
@ncsmusic9958
#automotive #engine #automotiverepair #auto #cars #vehiclerepair #automotive #chrixfix #ericthecarguy #tzworkshop #autorepairguys #southmainautorepairLLC
#themechanic #learningzone #mehcanic #automechanic #autoelectrician #autorepair #overhauling #engineinspection #engineoverhauling #pistons #connectingrod #engineassembling #engines #vehicleengine #vehicles #vehicle #cars #car #autocar #autocardoctor
Пікірлер: 403
It would be a crime to leave this video without liking it! U awesome dude!!!
@automotivespot
3 жыл бұрын
Thanks alot dear 🙂
@gopoikrishna77
2 жыл бұрын
After seeing your comment, I was horrified to leave without liking 😆. But you're 100% right
@automotivespot
2 жыл бұрын
Thanks buddy 😌
brief but good explanation of powered steering rack & pinion mechanism # 👍👍
@automotivespot
4 ай бұрын
Thanks a lot 😊🙏
This video is very good, thank you!
@automotivespot
6 ай бұрын
Thank you so very much for your positive and clear response ❤️ watch more videos on this channel, related to automobile 🚗
Thanks! Great and look forward to another edition detailing on the three/five way valve on how hydraulic fluid is guided to either side of the rack.
@automotivespot
2 жыл бұрын
Sure will be uploaded soon 😉
@user-tx4yw1wv1x
5 ай бұрын
Very good
Very well explained. Thank you
@automotivespot
4 жыл бұрын
Pleased ☺️
great explanation and really simple to understand on how it work...
@automotivespot
2 жыл бұрын
Thanks alot, stay blessed ❤️
Good explanation but I really wanted to see it move lock to lock. 👍
@automotivespot
2 жыл бұрын
Thank you for your complement
Thank you ,harbano!
I looked everywhere for this. Thank you. Just what I needed
@automotivespot
2 жыл бұрын
It's my pleasure, if you need some other topics , I will create a video and upload that soon.
@francoisfigeac4942
2 жыл бұрын
@@automotivespot just keep up the good work
@automotivespot
2 жыл бұрын
Thank you soo very much for your support feedback 😊
great video breakdown!
@automotivespot
5 жыл бұрын
Thank you sir 😊
Thanks very good explanation!
Thank you brother
Great explanation,, thank you brother ❤️
@automotivespot
Жыл бұрын
No prob dear thanks for complement
Thank you so much
Excellent description!
@automotivespot
5 жыл бұрын
Thank you sir 😊
good day to you this video was so helpful .thanks
@automotivespot
5 жыл бұрын
Thank you sir 👍
Useful video sir . Keep adding this types of video's
@automotivespot
5 жыл бұрын
Your appreciation means lot to me sir, thanks 👍
Thank you. Was looking for this.
@automotivespot
Жыл бұрын
Pleasure ☺️🤗 stay tuned ☺️
That great explanation, I feel like I have graduated in mechanical engineering, please someone get me a certificate 😁😁
@automotivespot
2 жыл бұрын
Haha 😃 feeling motivated 🤣 as reading your comments 😉
Great work!
@automotivespot
3 жыл бұрын
Thanks dear
Please explain how torque sensor work?
please upload some videos about foot operated steering system
Cool video this helps out a lot thanks.
@automotivespot
4 жыл бұрын
Thank you sir
Explanation is good
@automotivespot
5 жыл бұрын
Thanks 😊
sir you can explained about tarque sansor and power steering ecm kitt ? you can explained power steering connection
Thanks u sir 👍
Thanks a lot, well explained
@automotivespot
9 ай бұрын
Welcome, more videos to learn 😊
Nice explanation
@automotivespot
Жыл бұрын
Thanks for your compliment 🙂 stay tuned 🙂
Thank you sir ❤️
@automotivespot
3 жыл бұрын
Pleasure is all mine☺️
Thank for your information
@automotivespot
2 жыл бұрын
Pleasure is all mine. Do you need any other topic to cover ?
Great video!!! 👍
@automotivespot
2 жыл бұрын
Thanks buddy 😌
Nice bro tq for this info, amazing
@automotivespot
3 жыл бұрын
Pleasure dear, stay tuned👍
bro this is excellent
@automotivespot
Жыл бұрын
Thanks for your love and support ❤️ watch more at my channel ☺️
Thanks a lot!!! Great explanation !!!
@automotivespot
2 жыл бұрын
Thanks man 😌 stay in touch
@EGMATV1
2 жыл бұрын
@@automotivespot U r welcome!!!
very good explain
@automotivespot
4 жыл бұрын
Thank you sir ✌️
Good information!
@automotivespot
3 жыл бұрын
Thanks buddy ☺️
Great video
@automotivespot
5 жыл бұрын
Thanks brother 😊
I watched your video, all are very nice.
@automotivespot
5 жыл бұрын
Thank you soo very much 😊 your appreciation motivates me 👍
@leroyamir4361
2 жыл бұрын
You all probably dont give a damn but does any of you know of a method to log back into an instagram account? I was dumb lost the account password. I love any tricks you can give me!
@derricktrevor3664
2 жыл бұрын
@Leroy Amir instablaster :)
@leroyamir4361
2 жыл бұрын
@Derrick Trevor i really appreciate your reply. I got to the site thru google and im waiting for the hacking stuff now. I see it takes quite some time so I will get back to you later with my results.
@leroyamir4361
2 жыл бұрын
@Derrick Trevor it did the trick and I now got access to my account again. Im so happy! Thank you so much you really help me out !
Good video....Thanks
@automotivespot
5 жыл бұрын
Pleasure sir ☺️
keep it up sir, I have never seen such an amazing explanation
@automotivespot
5 жыл бұрын
Thanks sir
Man U nailed it Continue in english
@automotivespot
5 жыл бұрын
Your appreciation means alot to me, it gives me goosebumps 😊 thank you 😊
Thank you 😘
@automotivespot
3 жыл бұрын
Most welcome dear ❤️
thank you so much sire very good explenation also you should mention about how the torsen bar work because its the key element of the rotatory valve when the driver exort too much force one the wheel the trsen bar would twist and it will make the orifices in the grooves inside to line up so the fluid will be flowing to the appropriate line depending on if that twisting is to the left or to the right thank you so much very nice video keep up with these videos they are so good and i love them i would like if you mad a demonstration about the automatic transmission and the torque converter thank you so much sir
@automotivespot
5 жыл бұрын
Thank you so much, it means alot to me. Soon i'll cover more topics 😌
nice info
Sir thank you 😊
Good morning congratulations super
@automotivespot
Жыл бұрын
Thanks Paswan Check other videos, you ll like them too.
Thanks 👍👌👍
@VaraPrasad0004
3 жыл бұрын
Bro can u please explain how a rotary valve works
Thanks a lot bro
@automotivespot
4 жыл бұрын
Pleasure dear 💯
Great videos tell ushow to assist a normal steering of tractor with hydraulic power from lifter pump (DIY)
@automotivespot
2 жыл бұрын
That needs some modifications
Perfect 👍
@automotivespot
Жыл бұрын
Thanks Ahmet, stay tuned for more ✅
Nice explaination
@automotivespot
2 жыл бұрын
Thanks dear stay connected 😊
Good one 👍
@automotivespot
5 жыл бұрын
😊
The heart of the system is the 'rotary valve'. You should explain its part more like torsion rod, the valve holes, why the steering donot ho all the way to extremes and etc...
@automotivespot
3 жыл бұрын
You are right man, thanks you for positive criticized ☺️
روعة // شكرا
Really nice
@automotivespot
2 жыл бұрын
Thanks 👍 stay tuned 🙂
Thanks for nice information. How to replace oil seal of both side of steering. Thanks
@automotivespot
4 жыл бұрын
For this we have to dissassemble the whole steering system, and to remove the tie rods, and then we ll remove the oil seals and can replace them. Thank you
Thanks 👍
@automotivespot
2 жыл бұрын
Most welcome 😃
Thanks
@automotivespot
3 жыл бұрын
Welcome 🤗
Your english is very Indian 👍👍👍
Air clutch system please
always some indian guy who has the answer lmfao
@automotivespot
Жыл бұрын
😳😳😳
Very good video
@automotivespot
Жыл бұрын
Thanks Brandon 😊 watch other videos too 🙂 you might like them too 😊
thanks
@automotivespot
3 жыл бұрын
Pleasure is all mine 🙂 stay tuned for more ☺️
Thanks sir
@automotivespot
4 жыл бұрын
Pleasure dear,stay tuned 👍
Very interesting
@automotivespot
3 жыл бұрын
Thanks buddy
Great and very clear video. I perceived i interchanged the high pressured lines at the rotary valve section during rack installation, Please i like to know if the the steering system will still work fine ( i mean not hard to turn) if I leave it that way?
@automotivespot
2 жыл бұрын
Dear both the high pressure lines are same, so there will be no problem (hard steering) if you interchange these lines. The most important thing is tha if you Interchanged the place at valve you must interchange its place at rack too.
Good explanation. BUT please explain how the return pressure to the reservoir gets reduced from the pump ~1200 PSI down to LOW pressure
@automotivespot
2 жыл бұрын
There is a built-in spring loaded pressure relief valve, which operates when the pressure hits the preset limit. I hope you are clear now.
the best system why rhey replace elctrice power steer alot prolem
@automotivespot
7 ай бұрын
Electric power is more comfo than hydraulic, secondly innovation is important
Tnks
@automotivespot
3 жыл бұрын
Pleasure 😊
Great
@automotivespot
5 жыл бұрын
😊
Thank you and if you could add also how does air pressure involve?
@automotivespot
Жыл бұрын
Air pressure? At what point?
Thanks Nice and clear demonstration, I have a problem, when I park the vehicle for 8 hours the oil level reach to maximum and once engine starts the oil level becomes at min level... please advise what could be the possible reason...
@automotivespot
Жыл бұрын
The most likely reason for the power steering oil reaching the maximum level when the vehicle is parked for 8 hours and then going to the minimum level when the vehicle is started and driven is that there is a leak in the power steering system. When the vehicle is parked for an extended period, the power steering oil settles at the bottom of the reservoir, and any leaks in the system allow air to enter the system, which causes the oil level to drop. When the vehicle is started and the power steering system is engaged, the pump draws in air instead of oil, which causes the power steering to feel weak or "sluggish" and the oil level to drop further
Nice
@automotivespot
2 жыл бұрын
Thanks
Good explanation, but what I need to know is where does the fluid come from. Storage? How does one refill in a Toyota belta 2007 model, s2z engine?
@automotivespot
2 жыл бұрын
Fluid is stored in a small tank/bottle which is fitted under hood, it has marks of low and high fluid level, you can refill it from there. Thanks
Smart man
@automotivespot
2 жыл бұрын
Thanks balson 😉
Great video! Now I'm off to get a Slurpy Coke!
@automotivespot
5 жыл бұрын
😀😀😀
WOW 😮😱PAKISTAN SPEAKING ENGLISH😍😍😍😍ENGLISH PAKISTAN
@automotivespot
Жыл бұрын
Hahaha 🤣 lol
Super
@automotivespot
5 жыл бұрын
Ty 👍
Good
@automotivespot
7 ай бұрын
Thanks for the compliment ☺️
Very good explanation... i'm from Indonesia, can i use some part of your video ? its for educational video ?... Thanks in advance
@automotivespot
2 жыл бұрын
Yes sure.. You can, it ll be an honour for me.
What is it about the Indian language that causes Indian commentators to introduce a pause as a form of emphasis?😂
@automotivespot
3 ай бұрын
Hahah right, but with time it'll be good
Great!!
@automotivespot
3 жыл бұрын
Thank you soo much sir 😀
Good explanation. You spoke as if you were in a hurry. Were you going to assemble it following the video?
@automotivespot
5 жыл бұрын
Nops bro it was just a cutaway model for educational purpose 👍
Superb explanation, and model,
@automotivespot
5 жыл бұрын
😊
@pratikchandu7848
5 жыл бұрын
I have tata Indigo car, the same hydraulic system is in my car, and my steering is hard, can you tell me the reason behind this
@automotivespot
5 жыл бұрын
You must check for leakage, if there is a leak, definitely it will result as a hard steering, the second thing is to make sure there must be enough grease in joints to make the steering smooth, Thanks
@pratikchandu7848
5 жыл бұрын
@@automotivespot there is no leake in the system, i will check the grease
@automotivespot
5 жыл бұрын
Also check if the oil is contaminated.
EDUCATIVE!!!
@automotivespot
2 жыл бұрын
Thank you brother 😊
on my Sonata 2002 v6,16", there is a leak in either L or R metal line, I just want to replace the hose/Line Instead of changing the whole Rack & Pinion , which the mechanics do.What do you suggest.??
@automotivespot
4 жыл бұрын
No need to change the whole rack and pinion, if the leak is in the pressure line, just replace it with a new one. Thats it
Hi. Do you a have a video of how to fix leaking power steering rack? Thanks
@automotivespot
3 жыл бұрын
I haven't shoot such video, but the possibility of leakage, is due to some crack , or loose fitting or maybe the yoke is not properly fitted at its place.
🇲🇨Good nice video 👍👍👍👍👍
@automotivespot
3 жыл бұрын
Thank you , Visit my channel for more 😊
Thanks Please tell me the reason of my problem Why power steering is not returning full to its original
@automotivespot
2 жыл бұрын
Sticking or binding components, such as a king pin, ball joint, bell crank or even the steering column can prevent the steering wheel from returning to center after a turn
Dear, all the magic happens in rotary control valve, which you fail to describe, as how it changes direction when the steering is turned. Thanks for showing the inside though, good effort.
@automotivespot
3 жыл бұрын
Thanks for your constructive criticism, i ll try my best in future ❤️
sir i want know how fluid get stop when stop rotate steering
@automotivespot
4 жыл бұрын
Fluid remains in the chamber, till we rotate the steering wheel.
"This one is the steering column" lol
if there is oil leakage around the rubber at the valve what could be the main reason, which part need replacement?
@automotivespot
4 ай бұрын
The reason could be a damaged or worn-out seal within the valve assembly. Typically, the part that needs to be replaced would be the valve seal to stop the leakage. It's important to diagnose and address the issue promptly to prevent further damage to the power steering system.
how does the rotary valve function?
@automotivespot
5 жыл бұрын
Bro i am trying to make an animation video about the function of rotary valve, it will be uploaded soon.
Menerjemahkan teks dengan kamera I am your subscriber, sir. Please ask how to modify the Torque Rod in the Pinion Gear? . All this time I have been observing why no one has modified the Pinion Gear. The info is that by modifying the Pinion Gear you can lighten the steering. Thank you very much in advance, I am waiting for your answer and vlog
I was looking for this and try to make itin CAD creo
@automotivespot
5 жыл бұрын
Yes you can, but needs alot of hard work 👍 Well if you will make it, i also want to see that 👍
@jatinsharma9359
5 жыл бұрын
Yeah i will& looking for spiral gear formulas😅
@automotivespot
5 жыл бұрын
Keep it up bro 👍
@harshmadnani1613
4 жыл бұрын
@@jatinsharma9359 hey man can you please give me your email id? I also need that... As we are making a project of Self-propelled Onion harvester... Here's my mail-id => madnaniharsh057@gmail.com Whenever you're done with this CAD model please send the file. 🙏 It'll be very helpful for us.
So does the grease on the pinion gear ever touch the seal when the turning left or right
@automotivespot
5 жыл бұрын
Yes dear, but it has no effect on it 😊
If I have metal shavings in my power steering system should I replace my rack and pinion or flush and replace pump only??
@automotivespot
5 ай бұрын
Metal shavings in your power steering system could indicate a serious issue. It's recommended to thoroughly inspect the system to identify the source of the shavings. If the damage is extensive, replacing the rack and pinion might be necessary. Flushing the system and replacing the pump alone may not address the root cause.
@afzaalkhan.m
4 ай бұрын
Replacement a must
Semoga Allah SWT memudahkan segala urusan kita aamiin 🙏
@automotivespot
Жыл бұрын
I didn't understand your language, can you translate it to English?
What is the great explanation for steering pinion operation explanation 😂😂😂😂😂😂😂🎉🎉🎉🎉
@automotivespot
4 ай бұрын
Thank you 🙏