Great video! Helpful, clear and concise. Thanks

Great informative video as always. keep producing them

Want to say thank you because I used this video to fix my quad!! Leave a like if it helped you!!

Great video. You do make it look easy. I will try it on my 2003 Polaris 600 Sportsman.

Thank you so much!! This saved me and my dad much headache!!! Big thanks from finland🇫🇮🇫🇮

Great video and information on how to do your work on them...Thanks!

Enjoyed your video. We have the Polaris RZR XP 1000 and Wildcat X ATV's and we tour with them, they are tough and hold up well on our Las Vegas trails.

@PartzillaParts

7 жыл бұрын

Glad you liked the video, VOR Tours! ATV touring in Las Vegas sounds great. How many miles do you cover?

You make it look so easy

@PartzillaParts

7 жыл бұрын

Thanks for the complement, Walter! It's all about taking it one bolt at a time.... Thanks for watching!

Great video, fantastic camera and the text is a good help for people too.

@PartzillaParts

7 жыл бұрын

Thanks for the feedback, Riv! And thanks for watching. Appreciate it!

@basumatarytoon7185

6 жыл бұрын

riv1950 hey bro i want know more about axel and steering

Great Video What is your pros and cons for the Polaris 850 x2 from 2011 2 2016 Thanks again

Great video and just what I need. Bought a used 2000 Polaris Xplorer and the boots are pretty much non existent. Will use this video when I get ready to replace!

Great video. I thought I needed to replace the entire axle, but after removal and inspection I do not. I am just going to put new boots on. While breaking the axle down, I did not pay attention to which end of the axle went into the cup and which end went into the wheel hub. I noticed a slight difference in length on each end from the end of the axle to the set of grooves for the boot to sit. Do you know if the longer distance between the end of the axle and the grooves goes into the cup or the hub?

Great Video!

@PartzillaParts

7 жыл бұрын

Thanks Del!

I ended up having to use slide hammer, but the ears on the bearing broke so having to replace the whole outter part, not sure if I did something wrong to break them off. The snap ring want hold it on now.

where did you purchase that slide hammer? thanks

Is it done basicly the same way on everything?? I got a 1999 scrambler 400 2 stroke that has 2 bad boots on the front. I’ve never had a 4wd before and never done it

What is the tool called to put the CV Boot Clamps called. I would like to buy one. Thank you for a GREAT video!

Thank you!

How do you do the inner one

Great video. I just replaced the front springs on my 2015 sportsman570, after getting it all back together, I noticed there seems to be some binding on the front right. Could I have dislodged the cv joint? Thanks.

How did attach the slide hammer puller to the shaft

Thanks, how much should a boot replacement cost?

What puller did you use. I need to get one

Can you make another for the top boot

The name of the song at the end?

Anyone know if the process is the same for 2008 sportsman 300?

Whats the Pliers you use for that

When removing the outer cv are you attempting to hit the inner star section as opposed to the outer cage portion of the cv?

@PartzillaParts

7 жыл бұрын

you want to hit the inner section Gcslift

What tool did you use to tighten clamps?

good video is the procedure the same for a Polaris 330 magnum?

@PartzillaParts

6 жыл бұрын

The concept is the same, but there will be differences.

What is the better method for replacing the inner boot, remove the outer CV joint and boot and keep the axle shaft in place, OR remove the axle and then the inner CV joint? Does the inner CV joint remove same as the outer joint, just a clip ring?

@bryanbrown8079

9 ай бұрын

Yes just pull the axel out easy peasy

What grease goes on the axle? Changing my axle soon on a wv850 it snapped

@PartzillaParts

6 жыл бұрын

Just use some bearing grease.

On the outer cv one of the balls in the joint fell out, how do I put it back in?

@drd1924

4 жыл бұрын

tap it back in with a brass drift punch, if it fell out it will fall back in.

hello john , awesome videos you have, i just subscribe in too the channel, i own Polaris sportsman 850, i have i little accident someone hit me from behind and broke part of my right fender and my right tail light , can you make a video or have a video how to replace the light socket and the bulbs, i will appreciate that if you can help me on this issue, i think your videos are exceptional and very informative , i will recommend you to all my friends to subscribe...thanks

is that a special adapter for the slide hammer? mine will NOT come off

@PartzillaParts

7 жыл бұрын

Hello TeamTacticalChaos. We actually wielded a nut on the axle cup.

Hi on a 2014 Polaris ace do I have to replace the outer CV boot to replace the Inner boot? (This is on the front left side)

@PartzillaParts

6 жыл бұрын

Typically you replace both at the same time. If your boot is in good condition, you don't have to.

@jasontucker1701

6 жыл бұрын

Partzilla so I don't need to take the outer boot off to replace the Inner?

@PartzillaParts

6 жыл бұрын

It comes off. Your choice to "replace" it. It is recommended to replace both at the same time.

@jasontucker1701

6 жыл бұрын

Partzilla oh I see what ur saying appreciate it thank you

That is the most backwards way I've ever seen to do that. Why wouldn't you take the shaft off at the front differential and pull it out instead of disassembling the whole front end?

Please don't skip important bits, like how you separated the ball joint...

This is a lazy and incorrect way to rebuild your CV, please people disassemble and completely clean out the race, cage, and balls before filling with new grease. Any dirt that was allowed in from the torn boot is still in there!

I watched the entire video when is he going to use an air ratchet. Lol if he's going to try to be a technician he needs to know the name of his tools. He used 1/2 inch impact

Why didn’t you change both upper and lower boots???