Learn how to make pipes and cables in Blender with curves in this quick tip! Follow me on twitter: / passivestar_ Join our Discord: / discord
Жүктеу.....
Пікірлер: 196
@DJElliotS Жыл бұрын
Love this! Stuck on one part though (completely noob question here), but how do you get that quick menu where you can select "Separate/Join"? Menu can be seen at at this 0:56 mark. Thanks!
@passivestar
Жыл бұрын
Hey, it's my quickmenu addon! it's free. you can learn more about it here: kzread.info/dash/bejne/hYR9zbx-nsvahM4.html
@DJElliotS
Жыл бұрын
@@passivestar Gotcha, thanks so much! Keep up the awesome work!
@fortimusprime3 ай бұрын
THANK YOU SO MUCH FOR THIS. I LOVE it when people make these short, straight-to-the-point videos on tips and tricks. You are a LIFESAVER! Thank you!
@bagboybrown2 жыл бұрын
By far the most underrated blender tutorial of all time.
@dutchy83233 жыл бұрын
oh man now i can make all the pipes, thank you!!!
@01234fida5 ай бұрын
this is amazing ... people do 30 minutes tutorials which I have to watch 3x to understand this is exactly what Im looking for in minutes. LIFE SAVER, time and money saver as well!!!! Thanks
@fortimusprime
3 ай бұрын
Exactly! I'm in the same boat. I tend to look for 2-5 minute tutorials that go straight to the point. People that do these short tips are AWESOME!
@casualshibe6033 Жыл бұрын
Short and to the point. Exactly what I needed. Thank you!
@AXLplosion3 жыл бұрын
I've always used bezier curves to create the shape for my pipes, never thought about using vertices for it. Thanks!
@AnubisVolga3 жыл бұрын
OMG !!!!!!! THIS IS WHAT I WAS TRYING TO SEARCH !!!! You're my life saver !!! Thank you thank you thank you, I was trying to create some pipes and crazy stuff with "cables" for my "Blame!" world in Blender but I was struggled to how use pipes with cables.
@pyromaster90952 жыл бұрын
This kind of tutorials are amazing! Short, and you know everything you'll need. Thank you 👍
@passivestar
2 жыл бұрын
Glad it was helpful!
@paille-boy Жыл бұрын
straight forward, simple, quick, doesn't shove 40min of useless information i like it!
@danico.blender2 жыл бұрын
Beautiful and simple!!! the best pipe recipe so far!
@SapphWolf8 ай бұрын
Thank you! I kept looking for an easy way to make a cord and all I could find was tutorials kn how to make ropes and other complex objects! This is so much easier.
@bluefoosh Жыл бұрын
absolutely mind bending, I love how everything just fits into place and looks amazing, thanks you for this dude 👌
@passivestar
Жыл бұрын
No problem 👍
@antoyno Жыл бұрын
this is literally the best pipe tutorial I've found. thank you
@None321003 жыл бұрын
Satisfying flow. Simple and powerful, nice one
@maurorojas40203 жыл бұрын
I love your videos, just started following you a couple days and I am very impressed! you are a genius! glad you are using Blender
@passivestar
3 жыл бұрын
Awesome! Thank you!
@EmotionalDamage-iq3dl Жыл бұрын
you have no idea how much i,ve been struggling trying to make cables..you are a f$cking legend , lemme subscribe real quick
@wavier13 ай бұрын
This is AMAZING! Such an easy way to do it! Thank you so much!
@user-vc2pn4hm1z3 жыл бұрын
wow, KZread is really working on the recommendation filter, just a while ago I found a Roblox builder that started using blender and now I found these video! good tutorial, keep it up dude
@rizwanzaman17936 ай бұрын
So much value in such a short time Thanks ❤
@joe_fabricator2 жыл бұрын
It took me a few attempts but I did it. Saving this to my Blender Playlist!!! Thank you for this tutorial. It's amazing.
@passivestar
2 жыл бұрын
Glad it helped!
@gamea-live6392
2 жыл бұрын
How did he copy loops.
@danyarfan53842 жыл бұрын
Fastest subscribe button hit ive done lol so quick , smooth and informative!
@alexandremeynard61532 жыл бұрын
Ok, this is the best video i have ever seen on the internet.
@charlesrozen987 Жыл бұрын
A great short tutorial that actually worked :)
@uff2845 Жыл бұрын
omg the best blender tutorial ive ever seen!!!!
@bricedeguigne45273 жыл бұрын
Exactly what i needed, Thanks !
@skalien877 ай бұрын
LOVE THIS!!! thanks for the succinct tutorial!!!!
@gustavomelo77512 жыл бұрын
This helped me really much dude, thanks!
@brucemozart3665 Жыл бұрын
That is exactly what I'm looking for. Thank you : )
@chasgiv42 жыл бұрын
You just blew my mind!
@alejandroperezalvarez52373 жыл бұрын
these tutorials are amazing, thank you
@passivestar
3 жыл бұрын
Glad you like them!
@red1monster_6 ай бұрын
Quick and easy, amazing !
@Soap308 Жыл бұрын
Thank you!! this is how all Blender tutorials should be
@passivestar
Жыл бұрын
Happy to help!
@Tiki_Media Жыл бұрын
Brilliant! Thank you.
@ElDonitazz27 күн бұрын
Incredible video, also love your video format, very fast
@KeepItBrick Жыл бұрын
Dropped my Jaw in the first 20 seconds, Bravo sir!
@grizzzyboii383 жыл бұрын
super useful thanks :)
@Gadalac2 жыл бұрын
This is a perfect tutorial!!
@jeenu8152 жыл бұрын
fast and informative.... i love it you deserved my like
@passivestar
2 жыл бұрын
Thanks for liking!
@ciaranscl Жыл бұрын
Thank you so much for this.
@abdullahgun Жыл бұрын
what a legend you are!
@nixonmanuel64594 ай бұрын
Wow! Thank you!
@CrispyDaFrog Жыл бұрын
thanks, this helps a lot!
@hungnkyoutube46243 жыл бұрын
Love this video, I folow u and love the quick tip. it's so great and great. waiting every day for a next video. ^^. tks u so much
@PixLma3 жыл бұрын
wow thanks !
@cwdgamedev822Ай бұрын
This might be the best damn tutorial I've ever seen. You are the fucking man sir. I tip my hat to you. Maybe you can make a tutorial on how to make tutorials so we're not all out here wasting time learning how to make a cube, scrubbing through the timeline to the stuff we're here for.
@scottlee383 жыл бұрын
Awesome Work!
@passivestar
3 жыл бұрын
Thanks!
@NeonLabsss Жыл бұрын
really useful thanks
@Gametime055778 ай бұрын
Thanks for Easy Tutorial
@Wariety_art3 жыл бұрын
Thank you :)
@trylon341911 ай бұрын
Thank you!
@dilleswar4563 жыл бұрын
Thank you for your video sir
@jdworks29222 жыл бұрын
whoa!!!! thank you
@ben_angel8 ай бұрын
This is outstanding. Just wish you could do a more in-depth video on it.
@mayomaki007 Жыл бұрын
wow this is very effective Thank you
@passivestar
Жыл бұрын
You're welcome!
@trashmusic695 ай бұрын
amazing thx
@seasickdoorratАй бұрын
this is so goood
@lagunaciteko6134 Жыл бұрын
thx, cool tutorial
@WektorGH2 жыл бұрын
holy s.... awesome!
@toxico26992 жыл бұрын
Thanks. For once I'm commenting a blender tutorial. Thank you for not putting 10 hours long intro and outro. Thanks for not bombarding us with publicities. And thanks for getting straight to the point. Don't change
@danmcgill65002 жыл бұрын
when you created the bunch of cables at the end, is it then possible to animate them to move like cables and interact with each other?
@jorgeluismontoyasolis9800Ай бұрын
Nice!!!!
@IamNeighborlee11 ай бұрын
please slow down a little, those who have never done this will get lost, shouldn't have to slow down to go through it, but ty so much I needed this!!!!
@taiwoogunlesi345613 күн бұрын
Thank you.
@temptor7585 Жыл бұрын
ok THIS is gooddd
@wonderalbert Жыл бұрын
you're crazy, this is insane. thank you. im clapping for you
@Experternas Жыл бұрын
Gees. 1min is all it took for me to understand how to do it. THank you. this is what you should do, 1min superquick helpful tips. Love zero intro and outro, sick of those 10min long bullshit greetings and sponsor talks. you do you.
@nGmms Жыл бұрын
When extruding around the pipe at 0:29, is there a way to not get confused with the perspective? Like, for the extrusion to only touch the surface of the pipe.
@MubarakMarafa3 жыл бұрын
Thanks for these tips!! One thing i notice when you're modelling is that in the viewport your models have this look on them with the white edges and I guess Ambient Occlusion? How do you get those white edges?
@passivestar
3 жыл бұрын
I mention those settings in my startup file quick tip, check it out
@naprimer8534 Жыл бұрын
Hello! can u tell me please how did u get them (wires at 1:07) to move individually, in my case at this final step i can move wires all together only..
@___kj Жыл бұрын
thank you
@bcgunner9324 Жыл бұрын
This was fast.. had to use .5 speed :) TY for this.. quick question, at the very end when you're separting the cables out 1 by 1 using proportional editing... how do you get the move tool to move only that one tiny wire? Mine always move the entire bundle.
@icarustanovic30972 жыл бұрын
Great.
@dridri30002 жыл бұрын
Too bad we can't see the keys you press. at 1:00, you select only the edges. how do you do that without selecting all the mesh ?
@bluefoosh
Жыл бұрын
in the top left is a small group of buttons, those are the select modes, it has 3 modes, Vertices, faces, and edges, they should have little decals on them so you'll be able to tell (note the buttons are right under File, Edit, window etc tabs)
@H_dotL
10 ай бұрын
While in edge select mode, CTRL+ALT+left click to perform select ring function, and then SHIFT+CTRL+ALT+left click on the rest of the segments
@dwellersart75382 ай бұрын
the last one was cool
@mackdenila Жыл бұрын
How did you subdivide it at second 0.40 For me, nothing happens when I press CTRL+3
@Blackskies-b1z Жыл бұрын
i pressed m+1 and it made me save some kind of collection
@cadmanfox6874
Жыл бұрын
make sure you are in edit mode.
@Blackskies-b1z
Жыл бұрын
@@cadmanfox6874 thanks I realized that lol
@cadmanfox6874
Жыл бұрын
@@Blackskies-b1z i was about to comment about the issue too, but I checked edit mode. probably saved us a lot of time lol.
@pavelbeardudde98143 ай бұрын
Relieved way. Nice
@benjaminjerardsmith8 ай бұрын
Whoa. Can you produce a longer (more detailed) vid on this please?
@chryssdale57474 ай бұрын
I like pipes and cables
@joe_fabricator2 жыл бұрын
WOW!!!!
@TAC_T1 Жыл бұрын
I don’t understand how did you split the cables like that?
@juliestrator3 жыл бұрын
i liked
@SirEarlGrey Жыл бұрын
Its a real shame that you don't use software to display which keys you are using, especially at the end of the tutorial when your are splitting and editing the individual cables. I can't tell what you are doing so I can't replicate it :/
Жыл бұрын
Maybe this video is not for begginers me included, and is focused more in what you can do
@ferretart
Жыл бұрын
He's not doing anything too fancy! So all he's just selecting an edge and using the move tool (shortcut G) and then moving them around freely/rotating them. And how he's getting a large area to move around he has proportional editing turned on (should be at the top of your workspace in the centre, it's a little circle symbol) and then just to the right of that symbol there's a drop down menu which I think by default looks like a smooth A or mountain peak, click on that to bring down the options and click "Connected Only". That way you move around anything inside your "sphere" (mouse wheel up and down to increase/decrease the size of said sphere) and it'll only effect the individual tube you're selecting, despite it being part of a larger mesh! Okay LOOKS like a lot of info but I swear it's v straightforward haha. Just turn on Proportional editing> Connected only> G to move/S to scale/R to rotate.
@DeShark88
Жыл бұрын
@@ferretart this comment was so helpful! Once explained it was easy/obvious. Good explanation too!
@hoangkhang4117
8 ай бұрын
thanks you so much guy, you save my job =))))@@ferretart
@BunnyBunniee Жыл бұрын
tytytyty!
@shermayathenuwara7327 Жыл бұрын
at 1:00 how did you select just the edges without the faces?
@Mr.McWatson3 ай бұрын
neat
@elyakubu3 жыл бұрын
cool
@natureli55993 жыл бұрын
This is the video I'm looking for, but unfortunately there is no screen button display, which is distressing for beginners. THANKS
@paperclips13063 ай бұрын
can someone tell how did he do 0:22. the extrusions. how did he select the orange areas first. i started today, absolute beginner
@pheonixmaher2 жыл бұрын
bro the edge slide instructions are very unclear, ive been stuck on it for ages now trying to find out how to add that shape to the pipe, i would like a clearer explanation plz
@Ro03Ncp Жыл бұрын
how do you move the cables independently at the last part without affecting the others with the O button ?
@crashlegacy4768
Жыл бұрын
Cick on proportional editing at the top and select 'connected only' use rotate and move, scroll to increase radius of effect, if it doesnt work it may because the circle starts at about 1m radius and you need to adjust it to fir the scale your using :)
@Ro03Ncp
Жыл бұрын
@@crashlegacy4768 thanks!!!!!! I didnt know there was a connected only setting!
@TheDartFrog Жыл бұрын
hmm.. my cable ends up being egg-shaped when looking at the crossection near a bend :/ any ideas what I'm doing wrong? edit: had to apply all transforms before converting to curve :D
@NekoUK
Жыл бұрын
Applying all transforms while it was still a curve worked for me. You just have to be in object mode for the option to pop up. Thought I'd mention this as I was working with curves rather than with an object that you convert to a curve. Thanks for commenting this btw! I was very confused.
@hazelnutello76667 ай бұрын
how did you move each pipe alone 1:05
@chanchaljain42832 жыл бұрын
My line becomes a part of the object. Whenever I try to select it , the whole object gets selected .why so?
@SepicsFotografie3 жыл бұрын
Super video !! I only have the problem that the Faces Extrude does not work (Timestamp 0:24). For me, it only increases in one direction, not evenly in all directions. Does anyone have an idea what this can be ?
@BLOODCHROMEDESIGN
3 жыл бұрын
Try Alt-E, choose “Extrude along Normals’
@SepicsFotografie
3 жыл бұрын
@@BLOODCHROMEDESIGN Ahh perfekt...Thanks. Can you make Tutorials for beginners in a slower speed? 🤣. Sometime it is hard to understand with high speed 😃
@BLOODCHROMEDESIGN
3 жыл бұрын
@@SepicsFotografie No problem. I’m not the one who made this tutorial, just a random commenter.
@SepicsFotografie
3 жыл бұрын
@@BLOODCHROMEDESIGN Ahh sorry. My mistake 🤣
@GrimReaqer876
9 ай бұрын
bless u sire@@BLOODCHROMEDESIGN
@liweilin6649 Жыл бұрын
How to move cable seperately in final part of video?
@Mako-tm6qw
Жыл бұрын
1:06 see that blue box (top middle screen) ? Turn it on and press the small box next to it, then enable "connected only" :). This is called proportional editing.
@Gabriel-tx4dv17 күн бұрын
how do you "copy loops from the cable"?
@Tuna6964 Жыл бұрын
how do you move the wires separately so smooth only selecting one point at the end of the wires? 1:10
@passivestar
Жыл бұрын
It's called proportional editing, a circle icon top center of your viewport
@Tuna6964
Жыл бұрын
@@passivestar Thank you so much for the answer! I get that part now but now when I move one wire with 'g' it moves all the wires beside the one I move unlike you can move each individual wires separately even though the G circle is much bigger than mine.
@tovermoran4360
Жыл бұрын
@@Tuna6964 In the dropdown next to the Proportional Editing icon you can selected 'Connected Only'.
@fl4mm3
11 ай бұрын
@@tovermoran4360tysm!!!
@Se2ndchannel3 жыл бұрын
im clicking rmb c and 1 but its not working, im on laptop
Пікірлер: 196
Love this! Stuck on one part though (completely noob question here), but how do you get that quick menu where you can select "Separate/Join"? Menu can be seen at at this 0:56 mark. Thanks!
@passivestar
Жыл бұрын
Hey, it's my quickmenu addon! it's free. you can learn more about it here: kzread.info/dash/bejne/hYR9zbx-nsvahM4.html
@DJElliotS
Жыл бұрын
@@passivestar Gotcha, thanks so much! Keep up the awesome work!
THANK YOU SO MUCH FOR THIS. I LOVE it when people make these short, straight-to-the-point videos on tips and tricks. You are a LIFESAVER! Thank you!
By far the most underrated blender tutorial of all time.
oh man now i can make all the pipes, thank you!!!
this is amazing ... people do 30 minutes tutorials which I have to watch 3x to understand this is exactly what Im looking for in minutes. LIFE SAVER, time and money saver as well!!!! Thanks
@fortimusprime
3 ай бұрын
Exactly! I'm in the same boat. I tend to look for 2-5 minute tutorials that go straight to the point. People that do these short tips are AWESOME!
Short and to the point. Exactly what I needed. Thank you!
I've always used bezier curves to create the shape for my pipes, never thought about using vertices for it. Thanks!
OMG !!!!!!! THIS IS WHAT I WAS TRYING TO SEARCH !!!! You're my life saver !!! Thank you thank you thank you, I was trying to create some pipes and crazy stuff with "cables" for my "Blame!" world in Blender but I was struggled to how use pipes with cables.
This kind of tutorials are amazing! Short, and you know everything you'll need. Thank you 👍
@passivestar
2 жыл бұрын
Glad it was helpful!
straight forward, simple, quick, doesn't shove 40min of useless information i like it!
Beautiful and simple!!! the best pipe recipe so far!
Thank you! I kept looking for an easy way to make a cord and all I could find was tutorials kn how to make ropes and other complex objects! This is so much easier.
absolutely mind bending, I love how everything just fits into place and looks amazing, thanks you for this dude 👌
@passivestar
Жыл бұрын
No problem 👍
this is literally the best pipe tutorial I've found. thank you
Satisfying flow. Simple and powerful, nice one
I love your videos, just started following you a couple days and I am very impressed! you are a genius! glad you are using Blender
@passivestar
3 жыл бұрын
Awesome! Thank you!
you have no idea how much i,ve been struggling trying to make cables..you are a f$cking legend , lemme subscribe real quick
This is AMAZING! Such an easy way to do it! Thank you so much!
wow, KZread is really working on the recommendation filter, just a while ago I found a Roblox builder that started using blender and now I found these video! good tutorial, keep it up dude
So much value in such a short time Thanks ❤
It took me a few attempts but I did it. Saving this to my Blender Playlist!!! Thank you for this tutorial. It's amazing.
@passivestar
2 жыл бұрын
Glad it helped!
@gamea-live6392
2 жыл бұрын
How did he copy loops.
Fastest subscribe button hit ive done lol so quick , smooth and informative!
Ok, this is the best video i have ever seen on the internet.
A great short tutorial that actually worked :)
omg the best blender tutorial ive ever seen!!!!
Exactly what i needed, Thanks !
LOVE THIS!!! thanks for the succinct tutorial!!!!
This helped me really much dude, thanks!
That is exactly what I'm looking for. Thank you : )
You just blew my mind!
these tutorials are amazing, thank you
@passivestar
3 жыл бұрын
Glad you like them!
Quick and easy, amazing !
Thank you!! this is how all Blender tutorials should be
@passivestar
Жыл бұрын
Happy to help!
Brilliant! Thank you.
Incredible video, also love your video format, very fast
Dropped my Jaw in the first 20 seconds, Bravo sir!
super useful thanks :)
This is a perfect tutorial!!
fast and informative.... i love it you deserved my like
@passivestar
2 жыл бұрын
Thanks for liking!
Thank you so much for this.
what a legend you are!
Wow! Thank you!
thanks, this helps a lot!
Love this video, I folow u and love the quick tip. it's so great and great. waiting every day for a next video. ^^. tks u so much
wow thanks !
This might be the best damn tutorial I've ever seen. You are the fucking man sir. I tip my hat to you. Maybe you can make a tutorial on how to make tutorials so we're not all out here wasting time learning how to make a cube, scrubbing through the timeline to the stuff we're here for.
Awesome Work!
@passivestar
3 жыл бұрын
Thanks!
really useful thanks
Thanks for Easy Tutorial
Thank you :)
Thank you!
Thank you for your video sir
whoa!!!! thank you
This is outstanding. Just wish you could do a more in-depth video on it.
wow this is very effective Thank you
@passivestar
Жыл бұрын
You're welcome!
amazing thx
this is so goood
thx, cool tutorial
holy s.... awesome!
Thanks. For once I'm commenting a blender tutorial. Thank you for not putting 10 hours long intro and outro. Thanks for not bombarding us with publicities. And thanks for getting straight to the point. Don't change
when you created the bunch of cables at the end, is it then possible to animate them to move like cables and interact with each other?
Nice!!!!
please slow down a little, those who have never done this will get lost, shouldn't have to slow down to go through it, but ty so much I needed this!!!!
Thank you.
ok THIS is gooddd
you're crazy, this is insane. thank you. im clapping for you
Gees. 1min is all it took for me to understand how to do it. THank you. this is what you should do, 1min superquick helpful tips. Love zero intro and outro, sick of those 10min long bullshit greetings and sponsor talks. you do you.
When extruding around the pipe at 0:29, is there a way to not get confused with the perspective? Like, for the extrusion to only touch the surface of the pipe.
Thanks for these tips!! One thing i notice when you're modelling is that in the viewport your models have this look on them with the white edges and I guess Ambient Occlusion? How do you get those white edges?
@passivestar
3 жыл бұрын
I mention those settings in my startup file quick tip, check it out
Hello! can u tell me please how did u get them (wires at 1:07) to move individually, in my case at this final step i can move wires all together only..
thank you
This was fast.. had to use .5 speed :) TY for this.. quick question, at the very end when you're separting the cables out 1 by 1 using proportional editing... how do you get the move tool to move only that one tiny wire? Mine always move the entire bundle.
Great.
Too bad we can't see the keys you press. at 1:00, you select only the edges. how do you do that without selecting all the mesh ?
@bluefoosh
Жыл бұрын
in the top left is a small group of buttons, those are the select modes, it has 3 modes, Vertices, faces, and edges, they should have little decals on them so you'll be able to tell (note the buttons are right under File, Edit, window etc tabs)
@H_dotL
10 ай бұрын
While in edge select mode, CTRL+ALT+left click to perform select ring function, and then SHIFT+CTRL+ALT+left click on the rest of the segments
the last one was cool
How did you subdivide it at second 0.40 For me, nothing happens when I press CTRL+3
i pressed m+1 and it made me save some kind of collection
@cadmanfox6874
Жыл бұрын
make sure you are in edit mode.
@Blackskies-b1z
Жыл бұрын
@@cadmanfox6874 thanks I realized that lol
@cadmanfox6874
Жыл бұрын
@@Blackskies-b1z i was about to comment about the issue too, but I checked edit mode. probably saved us a lot of time lol.
Relieved way. Nice
Whoa. Can you produce a longer (more detailed) vid on this please?
I like pipes and cables
WOW!!!!
I don’t understand how did you split the cables like that?
i liked
Its a real shame that you don't use software to display which keys you are using, especially at the end of the tutorial when your are splitting and editing the individual cables. I can't tell what you are doing so I can't replicate it :/
Жыл бұрын
Maybe this video is not for begginers me included, and is focused more in what you can do
@ferretart
Жыл бұрын
He's not doing anything too fancy! So all he's just selecting an edge and using the move tool (shortcut G) and then moving them around freely/rotating them. And how he's getting a large area to move around he has proportional editing turned on (should be at the top of your workspace in the centre, it's a little circle symbol) and then just to the right of that symbol there's a drop down menu which I think by default looks like a smooth A or mountain peak, click on that to bring down the options and click "Connected Only". That way you move around anything inside your "sphere" (mouse wheel up and down to increase/decrease the size of said sphere) and it'll only effect the individual tube you're selecting, despite it being part of a larger mesh! Okay LOOKS like a lot of info but I swear it's v straightforward haha. Just turn on Proportional editing> Connected only> G to move/S to scale/R to rotate.
@DeShark88
Жыл бұрын
@@ferretart this comment was so helpful! Once explained it was easy/obvious. Good explanation too!
@hoangkhang4117
8 ай бұрын
thanks you so much guy, you save my job =))))@@ferretart
tytytyty!
at 1:00 how did you select just the edges without the faces?
neat
cool
This is the video I'm looking for, but unfortunately there is no screen button display, which is distressing for beginners. THANKS
can someone tell how did he do 0:22. the extrusions. how did he select the orange areas first. i started today, absolute beginner
bro the edge slide instructions are very unclear, ive been stuck on it for ages now trying to find out how to add that shape to the pipe, i would like a clearer explanation plz
how do you move the cables independently at the last part without affecting the others with the O button ?
@crashlegacy4768
Жыл бұрын
Cick on proportional editing at the top and select 'connected only' use rotate and move, scroll to increase radius of effect, if it doesnt work it may because the circle starts at about 1m radius and you need to adjust it to fir the scale your using :)
@Ro03Ncp
Жыл бұрын
@@crashlegacy4768 thanks!!!!!! I didnt know there was a connected only setting!
hmm.. my cable ends up being egg-shaped when looking at the crossection near a bend :/ any ideas what I'm doing wrong? edit: had to apply all transforms before converting to curve :D
@NekoUK
Жыл бұрын
Applying all transforms while it was still a curve worked for me. You just have to be in object mode for the option to pop up. Thought I'd mention this as I was working with curves rather than with an object that you convert to a curve. Thanks for commenting this btw! I was very confused.
how did you move each pipe alone 1:05
My line becomes a part of the object. Whenever I try to select it , the whole object gets selected .why so?
Super video !! I only have the problem that the Faces Extrude does not work (Timestamp 0:24). For me, it only increases in one direction, not evenly in all directions. Does anyone have an idea what this can be ?
@BLOODCHROMEDESIGN
3 жыл бұрын
Try Alt-E, choose “Extrude along Normals’
@SepicsFotografie
3 жыл бұрын
@@BLOODCHROMEDESIGN Ahh perfekt...Thanks. Can you make Tutorials for beginners in a slower speed? 🤣. Sometime it is hard to understand with high speed 😃
@BLOODCHROMEDESIGN
3 жыл бұрын
@@SepicsFotografie No problem. I’m not the one who made this tutorial, just a random commenter.
@SepicsFotografie
3 жыл бұрын
@@BLOODCHROMEDESIGN Ahh sorry. My mistake 🤣
@GrimReaqer876
9 ай бұрын
bless u sire@@BLOODCHROMEDESIGN
How to move cable seperately in final part of video?
@Mako-tm6qw
Жыл бұрын
1:06 see that blue box (top middle screen) ? Turn it on and press the small box next to it, then enable "connected only" :). This is called proportional editing.
how do you "copy loops from the cable"?
how do you move the wires separately so smooth only selecting one point at the end of the wires? 1:10
@passivestar
Жыл бұрын
It's called proportional editing, a circle icon top center of your viewport
@Tuna6964
Жыл бұрын
@@passivestar Thank you so much for the answer! I get that part now but now when I move one wire with 'g' it moves all the wires beside the one I move unlike you can move each individual wires separately even though the G circle is much bigger than mine.
@tovermoran4360
Жыл бұрын
@@Tuna6964 In the dropdown next to the Proportional Editing icon you can selected 'Connected Only'.
@fl4mm3
11 ай бұрын
@@tovermoran4360tysm!!!
im clicking rmb c and 1 but its not working, im on laptop