Bhaiya what will happen when I will turn 40. Will Vlsi industry fire me due to age or would i be able to sustain in industry? Isn't vlsi industry saturated ? Latest chip size is 2nm and will there be still jobs after 15-20 years ?

@Shubham_pandey-nk1un

16 күн бұрын

Which job is better VLSI jobs or SSC CGL top Jobs ?

@VivekGangi

9 күн бұрын

Wow, that's a great question. Let me try to explain what I can. You can correct me if I'm wrong. I see you are worried about what the future is going to be, with the technology nodes reaching saturation. You need to understand a thing, a cycle from final GDS to tape out will take a year more or less. That means, the chips that are used in the market now have been designed a minimum of one year before (obviously far before that). So, research and progress is continuous here in the VLSI industry. Currently 1.6 A projects are going on and even lower ones as I have heard. It's not just process nodes, but the type of MOSFET that is also progressing with R&D. From planar fet to ribbon fet, changes are inevitable for every couple of years. As you grow you accumulate knowledge, whatever node it is DRCs, concepts, timing fixing and many primal things are going to be still the same. So, in short this industry is not saturating like the software industry but growing rapidly. Just try to follow industry news and stuff to understand. Even I'm still learning. Just be active and invest time to learn. All the best 👍! Do subscribe to our channel to support us 😁

@Shubham_pandey-nk1un

9 күн бұрын

@@VivekGangi Thank you very much for your reply sir. Another question was about retirement age. It is 40 years. I am worried about it ? Will I still be able to work in industry at 50 years or do I have to find other ways of earning in that time ? If you could answer this then it will be a great help.

@VivekGangi

9 күн бұрын

I haven't heard of retirement age to be 40 years anywhere. Looks like you are confused with this information. 50 years is more than enough to earn for yourself what you need for retirement. With the pressure and low work life balance in the VLSI industry, I don't think it will be good for our health to work post 50. It's just my personal opinion, you can decide accordingly. All the best 👍. Do subscribe to our channel to support us 😁

@Shubham_pandey-nk1un

9 күн бұрын

@@VivekGangi That's good news for us. Thank you sir. And I am already your subscriber and a regular viewer.

Brother I'm about to graduate in next 2-3 months, Recession is affecting both it & EC domain, I hv sufficient knowledge inboth, in vlsi I'm well aware digital IC design, digital electronics & familiar with verilog, vhdl coding, anything else which I needed to cover get a job in vlsi physical design domain

I am mechanical engineer,2022 passed out,i have been prepared for competitive exams for last two years,now i would like to work with VLSI Semiconductor like pcb design,then what is the career path for me, could you provide me? And also i did a core java certification course in 2022 for the reason of my own intrest

Hello buddy, I am in my third year of ECE, and I want to pursue my career in the VLSI field. However, I have very little knowledge about this area. If I want to advance to the next level, could you suggest a roadmap for beginners or recommend a course for me?

@VivekGangi

4 ай бұрын

Hey there! That's gonna need a long discussion. Please DM me on my Instagram or LinkedIn (Vivek Gangi). We can discuss further. All the best! Do subscribe to our channel to support us 😁🙌

Hey bro, I joined mtech vlsi at vit vellore in 2023 and am looking for an internship right now. I saw Apex is accepting applications for internship. How is it? Can you tell me something about the company and work there?

@VivekGangi

3 ай бұрын

Hey Abhishek! Please DM me on LinkedIn or Instagram for a detailed discussion on this! Thanks for reaching out. All the best! 🙌 Do subscribe to our channel to support us! 😁

which role is best physical design engineer (back end) or design and verification engineer(front end)

@VivekGangi

Ай бұрын

Hi there! Both are good in separate perspectives. Please give me some time to understand the differences in detail and make a video to cover that. All the best 👍. Do subscribe to our channel to support us 😁

Bro can you explain about the design and verification engineer career growth and opportunities at present.

@VivekGangi

4 ай бұрын

Hi there! I don't really have direct experience working for that role. But surely, I will try to get information from the people who have worked on that and surely make a video on that. Thanks! Do subscribe to our channel to support us!

i got an offer as a DV engineer from a startup company , how is that particular domain for future aspect

@VivekGangi

Ай бұрын

Hi there! Of course it's a good role. Though, in startup and small scale companies they have roles of physical design and verification combined (The same Physical Design Engineer, person does both works). My personal suggestion is to learn design aspects as well for better knowledge and the future. Since it's a startup, you will surely have a learning experience with a good intent. All the best 👍. Do subscribe to our channel to support us 😁!

@thegreat5539

Ай бұрын

@@VivekGangi Sure sir Thanks for replying I am in Final yr of my gate and I hv also qualified gate According to my score I can get nit Jalandhar Mtech in VLSI Or NIT calicut - power electronics What should be good to do ,kindly suggest

In a ambiguity which to choose PD or RTL Design engineer. I have intrest in both of them. Can you help me to choose the correct one?

@VivekGangi

2 ай бұрын

Hey there! It completely comes to your strengths. If you are strong in coding, architecture and verilog and system verilog, you can go with RTL design and verification. Physical Design does need coding but along with knowledge in device physics, physical Design aspects, etc. since you have mentioned that you are interested in both, I suggest you to choose them as per your strength as it will help you to succeed in your career as well. All the best 🙌. Do subscribe to our channel to support us 😁!

@vyshakshetty1047

Күн бұрын

​@@VivekGangi how's the work life balance in RTL design or in design verification roles? Is it the same as physical design or is it better?

Hii Broh, i recently graduated from ECE, now am taking PD course, from one of the coaching centre in Bengaluru, right now there are only few openings for freshers... It's becoming very hard to start a career as fresher....

@VivekGangi

4 ай бұрын

Hey Akhil! Yes you are correct. Openings are less not only for freshers, but for experienced as well. Even for the available openings, the pay is not good or as expected. It's because of the economic crisis. But most likely there will be openings coming up in the next two three months as its a financial year wrap up. Let wait and hope for the best! All the best! Do subscribe to our channel to support us 😁!

@akhilgodishala3405

4 ай бұрын

@@VivekGangi Yeah Broh, I Hope everything will be fixed in next financial year..

@sahilml3703

3 ай бұрын

Hi bro I'm planning to join can you tell me which coaching center?

@user-uy1fq7ms6l

2 ай бұрын

Hi bro what is the fee structure in Bangalore and which institute you joined??

@user-uy1fq7ms6l

2 ай бұрын

For PD course

Didnt answered the important questions, you were repeating the same thing

@VivekGangi

4 ай бұрын

Hey Kunal! In that case, why don't you tell me what's your question? I'll try to answer. Thanks for reaching out!

Bro i am recently graduated in ece just 1week back i want to join PD course can u plz suggest some couching center in Bengaluru plz help me bro no one is helping me bro

@life_need_24

Ай бұрын

hi bro

@VivekGangi

Ай бұрын

Hi Mani, Please give me some time. I'll cover this topic and make a video on this. All the best 👍. Do subscribe to our channel to support us 😁

@datik_VlSI.and.farming

Ай бұрын

​@@life_need_24 vlsi guru is better then other vlsi instituets

Bhaiya doing eve from iiitd is worthit

@VivekGangi

2 ай бұрын

Hey Nikhil! I'm really sorry, I don't have any information regarding that. Anyways, all the best 👍!

No clear cut information....we need more explanation about PD in the present market scenario

@VivekGangi

2 ай бұрын

Hey there! Fine, could you please tell me what information exactly are you expecting? This could help in my upcoming content. Thanks for reaching out. All the best! Do subscribe to our channel to support us 😁🙌

what will be the starting package for these startups(apex,insemi) and will there be growth in an year if we perform well.

@VivekGangi

4 ай бұрын

Hey there! Can't say the exact package as it varies from organisation to organisation. But it would be between 4-10 LPA or even more in some cases. It exactly depends on your education and experience. All the best! Do subscribe to our channel to support us! 😁

This video is lengthy for you? Skip to the timestamps of your choice! Do subscribe to our channel to support us!

Hi

@VivekGangi

4 ай бұрын

Hey!

I can't understand your voice

@VivekGangi

4 ай бұрын

Hey! Sorry for that. I'll try to modulate better in my next video. Thanks. Do subscribe to our channel to support us 😁🙌

@user-nq2cz5zz6u

4 ай бұрын

@@VivekGangiyou don't say sorry... I like physical design Engineering job