Peristaltic locomotion device

Ғылым және технология

Ad: Thanks to PCBWay for sponsoring this video:www.pcbway.com/
Worms locomote using a system of Peristalsis, or Peristaltic motion. This means that sections of their body expand and contract to push themselves along. There have been quite a few research projects for robots that move like this, and I previously built my own simple version which used four concertina mechanisms driven by servos to make four expanding and contracting sections.
This didn’t work very well because as each section expands and contracts it also gets longer and shorter which pulls or pushes the other sections in and out either side, so with all of the sections doing this, getting it to be synchronised efficiently was quite difficult. Worms have little bristly hairs on them which act a bit like a ratchet to help them go forwards and not slips backwards, so ratchet wheels would probably have helped on my mechanical worm,
But this time we’re going to try to make a more efficient design without putting wheels on it. The plan is to keep the concertina parts but make them slide independently of each other so they don’t push and pull the sections either side. Let’s get the parts 3D printed and assembled, and it’ll be clearer how it’s going to work.
You can support me on Patreon, join my Discord, or buy my Merchandise:
***************************
Discord: / discord
Patreon: / xrobots
Merchandise: teespring.com/stores/james-br...
***************************
Other socials:
***************************
Instagram: / xrobotsuk
Twitter: / xrobotsuk
Facebook: / xrobotsuk
***************************
Affiliate links - I will get some money of you use them to sign up or buy something:
***************************
10% off at www.3dfuel.com/ - use code XROBOTS at the cart screen.
Music for your KZread videos: share.epidemicsound.com/xrobots
***************************
CAD and Code for my projects: github.com/XRobots
Huge thanks to my Patrons, without whom my standard of living would drastically decline. Like, inside out-Farm Foods bag decline. Plus a very special shoutout to Lulzbot, Inc who keep me in LulzBot 3D printers and support me via Patreon.
HARDWARE/SOFTWARE
Below you can also find a lot of the typical tools, equipment and supplies used in my projects:
Filament from: www.3dfuel.com/
Lulzbot 3D Printers: bit.ly/2Sj6nil
Bearings from: simplybearings.co.uk/
Lincoln Electric Welder: bit.ly/2Rqhqos
CNC Router: bit.ly/2QdsNjt
Ryobi Tools: bit.ly/2RhArcD
3D Printer Filament: bit.ly/2PdcdUu
Soldering Iron: bit.ly/2DrNWDR
Vectric CNC Software: bit.ly/2zxpZqv

Пікірлер: 174

  • @chrismanning5232
    @chrismanning52327 ай бұрын

    It really feels like there's not enough hours in the day for the amount of planning, printing, building, coding, and testing you do week-to-week for these videos. It's honestly incredible and also a bit scary. I think you deserve a nice month-long vacation, friend. Really great work!

  • @sprinteroptions9490

    @sprinteroptions9490

    7 ай бұрын

    I highly doubt he prints all those parts himself. Every once in a while we get a quick shot of one printer but i doubt that's the whole story. But his whole shtick is this DIY veneer so whatever....

  • @skymorphosis

    @skymorphosis

    5 ай бұрын

    you can see in other videos that he has a rack of 6 or more lulzbot printers. It is indeed a lot to print but his sponsor seems to have provided enough 3d printers for these projects. Incredible amount of work though, really quite jealous of his discipline.@@sprinteroptions9490

  • @AceAlbatros
    @AceAlbatros7 ай бұрын

    I’ll be honest, it seems terrifying to sit on

  • @RaxaPKXD

    @RaxaPKXD

    7 ай бұрын

    Especially as a man! All the moving and shifting parts below your parts! 😂

  • @thomasawl

    @thomasawl

    7 ай бұрын

    ‘CARRY ME INTO BATTLE, ROBOWORM!’

  • @AB-Prince
    @AB-Prince7 ай бұрын

    I think if you had six, so that every 3rd section is in sync, then you'd get the best results, as there's almost constant forward motion and always two sections lifting up the rest of them

  • @TheGhost49
    @TheGhost497 ай бұрын

    James, in order to make a worm that you can ride on you'll need to keep in mind the issue of mass. Segments with greater mass, i.e. where you're located, will be more resistant to change when contracting. You may be able to solve this, and potentially improve the locomotion, by designing an "upper deck" where you sit. By syncing your placement over the segment that is expanding at the time but shifting forward for contraction you would encourage forward movement.

  • @Grunttamer
    @Grunttamer7 ай бұрын

    “Don’t try to impress anyone. You’re brave, we all know that. Be simple, be direct. Nothing fancy.”

  • @codemonkey2k5
    @codemonkey2k57 ай бұрын

    If the wheels had grip and were designed to rotate in only one direction. Then they would free wheel going back and then drag against the floor when going forward. That should really help with efficiency.

  • @bmxscape

    @bmxscape

    7 ай бұрын

    i was thinking the same thing just wasnt sure how to stop the wheels. a one way bearing would work perfect

  • @Artaimus

    @Artaimus

    7 ай бұрын

    Ratchet perhaps?

  • @MH_Binky

    @MH_Binky

    7 ай бұрын

    He mentions the idea of using ratcheted wheels early on in the video.

  • @yngndrw.
    @yngndrw.7 ай бұрын

    I was hoping you'd try 750ms, as that would result in each segment being 90 degrees out of phase.

  • @dudeyoudontneedmyname
    @dudeyoudontneedmyname7 ай бұрын

    When you went from step input to ramped input, you needed to add a delay in the routine for each movement to finish before the next movement starts. Because of this, you essentially always have all your parts moving at once. No section of the worm ever has a stable platform to exert force against. If you add in the delay, you can trigger the segments sequentially, with each acting against a pair of stationary partners. The mechanism can take much larger and more stable steps.

  • @aserta
    @aserta7 ай бұрын

    Have you made a centipede yet? Because that could be programmed to do peristalsis. They're also incredible to look at. Whenever i find one i spend a little time to observe the perfection of that movement, it's really incredible how nature bio-engineered such a creature.

  • @DrWhom

    @DrWhom

    7 ай бұрын

    he could, like, link three together!

  • @stevenfaber3896

    @stevenfaber3896

    7 ай бұрын

    I was literally thinking this exact same thing when he mentioned the feet and then was like nahhhhh, I'm like sir, the centipede is obviously the divergent evolution of the worm!!! Cool they can also peristalse as well.

  • @0hellow797
    @0hellow7977 ай бұрын

    Could you make a strandbeest version? I think it would be a good compromise, and get more motion over time. It would be fun to still use the linkages type for steering too!

  • @vell0cet517
    @vell0cet5177 ай бұрын

    Dear James, You're a treasure. Thanks for making such awesome videos! Stay awesome.

  • @noname-jr9bk
    @noname-jr9bk7 ай бұрын

    I love this, so simple and very effective. I can see imagine with a little further development, this could be your future lollypop person, helping people safely cross a road. Brilliant keep up the great inspiring work. 👍

  • @lonewarrior6633
    @lonewarrior66337 ай бұрын

    Can we just take a moment and appreciate how good James is looking recently. Have you been working out mate? Whatever you’re doing…….keep doing it! Well done!

  • @RealAndySkibba
    @RealAndySkibba7 ай бұрын

    This is really neat! The old pioneers had it right about riding worms

  • @StephenBoyd21
    @StephenBoyd217 ай бұрын

    I think you are the closest to a crazy inventor that KZread gets. Unless somebody knows an even crazier inventor???

  • @PCBWay
    @PCBWay7 ай бұрын

    This is so good, James! 👍

  • @eTiMaGo
    @eTiMaGo7 ай бұрын

    those movements are crazy! some real loco-motion! :D

  • @michaelmcgruddy9464
    @michaelmcgruddy94647 ай бұрын

    You made a complicated new mechanism to stop the feet sliding and It would have worked. And then you put wheels on it... you are a robotics artist. Love your content, it's fascinating.

  • @Ebolachicken
    @Ebolachicken7 ай бұрын

    looks more like a human centipede 😂

  • @ChongMcBong
    @ChongMcBong7 ай бұрын

    Peristaltic perambulation :O excellent work 👍

  • @2peoples785
    @2peoples7857 ай бұрын

    lolzbot and 3d fuel have helped you for sooo long!

  • @trekintosh
    @trekintosh7 ай бұрын

    Would have liked to see a 750ms delay so that it would be a full even cycle between front and back movements. Exactly half of the 1.5 second one. That way there should always be one actively pushing forwards. Another idea would be to have the middle two segments have TPU feet so they have more traction, while the outer two keep lower friction feet since they aren’t supported.

  • @YeshuaGod22

    @YeshuaGod22

    7 ай бұрын

    750ms was my instinct too, but I would have tested other harmonic fractions of 3s as well.

  • @BigBaddaBoom
    @BigBaddaBoom7 ай бұрын

    I love the idea of a peristalsis bike!

  • @Kenprints
    @Kenprints7 ай бұрын

    if you made the very first and last roller move but with a freewheel mechanism then as it pushes the droopy front section along the roller has no friction and when it is subject to drag the freewheel locks which would give it grip - same for the very last roller so it gets real good one way motion - if u wanted to get fancy u could have these done like the gears on a ratchet so that you could activate them via a servo so you could get forward and reverse motion

  • @sssamalander
    @sssamalander7 ай бұрын

    Love the idea of the feet at 9:48 - It’s kind of unsatisfying right now since it kind of slides around. I think the feet would look even cooler, especially since they’re so unique

  • @nigeypants5500
    @nigeypants55007 ай бұрын

    I think syncing the motion so that the main shaft travels at a constant rate would be nice. It would require placing and lifting each foot all while moving backward for no slip. This is harder in segments since it wants to have longer stroke. Would be cool to see on a long single shaft. I think you'd have to move them relative to the shaft with a rack and pinion tho since you want the legs' strokes to overlap.

  • @Nobe_Oddy
    @Nobe_Oddy7 ай бұрын

    That last design you showed in the software with 2 feet on two rails looked like a great starting point... BUT instead there are 2 feet on each rail that make up each of the 4 segments that pivot with the ball and socket like in the peristaltic prototype. And each of the feet can lift up and down just enough for the 4 feet to be used in a 'walking pattern' then each segment is angled left or right to steer..... and you may even use 2 of these, each like the track of a tank with you sitting in between..... - I don't think you need any type of joints like a knee or ankle if you're on a hard flat surface, but if you use it 'off-road' you might be able to get away with a sort of 'shock absorber' in each of the feet to walk on uneven terrain, so that each foot's lift/extension doesn't require full extension to 100% ... but that would require position sensors on each foot.... but this is all obvious to you LOL - I know nothing about this, except for what I've learned from watching your videos..... - - I only wrote this out because you mentioned how it would look while moving, and I think this would look hypnotizing the way millipedes looks... or you could think of each section as a tiny horse lol (how that for a decoration - lol - you riding atop 4 tiny horses ) - ANYWAY ... I hope this at least gave you some inspiration or ideas... that's the least I can try to do for all that you have given me with your amazing videos and BRILLIANT projects!!! THANK YOU!

  • @BenKDesigns
    @BenKDesigns7 ай бұрын

    It seems like the worm is moving all it's front parts forward sequentially, then pulling the back end forward using the combined friction of each forward-facing section. Do something similar, where you're effectively making a sine wave that terminates flat on the stopping part, allowing each back-facing portion of the vehicle lift up and move forward with no friction, while the front portion holds the rest of the vehicle in place.

  • @preytec
    @preytec7 ай бұрын

    You could use expanding rings. The expanded rings holds and allowes the contracted rings can move up the main rib

  • @Squibbleses
    @Squibbleses7 ай бұрын

    With Steve Mould's recent video about self assembling materials I wonder if something like that could be used for propulsion. Expanding up/down to make a lateral peristalsis or something?

  • @anon_y_mousse
    @anon_y_mousse7 ай бұрын

    I like the foot lifting idea. I wonder how it compares for power efficiency with the peristalsis imitating version. Is one more efficient or would they be about the same?

  • @bustabenson
    @bustabenson7 ай бұрын

    This seems like a good use case for machine learning - let the beast figure out the most efficient method of locomotion for itself

  • @12345maxx
    @12345maxx7 ай бұрын

    I think you need a bit of a spine or back bone to help lift the front and rear section up when they are expanding to reach forward.

  • @DicklessHipster
    @DicklessHipster7 ай бұрын

    You low key have some of the coolest videos on KZread. Always dropping great content. Kudos.

  • @juliomassa
    @juliomassa7 ай бұрын

    Placing ratchets on the wheels can help direct forward movement

  • @newburypi
    @newburypi7 ай бұрын

    How about using an inverted "U" movement for the vertical action. It may help in rougher terrain.

  • @sincerefuller5399
    @sincerefuller53997 ай бұрын

    Would it help to put a breaking system on the rear wheels? It’s just like walking, the back leg pushes the body forward, by adding a breaking system (wheel locking system) you can keep the wheel stationary for a moment in time.

  • @ulrichporschmann8445
    @ulrichporschmann84457 ай бұрын

    what if you add some non-moving standoffs to the front and back? just inert parts that keep the height, and prevent the moving parts from dropping

  • @CericME
    @CericME7 ай бұрын

    Was watching this and wondering if the wheels could be made is such a ways that when they were going in the pulled direction they would roll and when they go in the push direction they don't roll.

  • @chrisstearns10
    @chrisstearns107 ай бұрын

    Could you make the rollers so that they only roll in one direction? So when it retracts the rollers stop and it gets pulled forward more?

  • @tactileslut
    @tactileslut7 ай бұрын

    Peanut gallery suggests: asymmetric drive on the concertina segments, for leaning or moving the force point to the side, and more segments. Also the relevant attribute range seems to be tall to short more than thin to fat. Suspended between its taller neighbors each picks itself up. Love your projects.

  • @191fox
    @191fox7 ай бұрын

    how big is your 3d printer. i want to see if i can print some of the stuff you make. love the robots

  • @Ryan_Tidwell
    @Ryan_Tidwell7 ай бұрын

    I'd be interested in seeing a version without the concertina mechanisms and has ratcheting wheels. I think if you got the timing right each section could push in sequence and it would really move.

  • @jaikumar848
    @jaikumar8487 ай бұрын

    Hello sir ! Why limbs are less efficient than wheel ? In ideal case with ideal components will limbs still be less efficient?

  • @segue2ant395
    @segue2ant3957 ай бұрын

    This works similarly to a simulation I made for peristaltic motion. It was for a videogame where you'd play as a loose length of intestine, but that's beside the point. The point is - I was using 6 sections for mine. I spent AGES trying to get it to do more than just vaguely wriggle around. What I found was that an even number of sections is just... bad, somehow? Three is useless, so 5 or 7 are a good pick. Slap another module onto the back of that worm of yours and it might well perform a bit better... Edit: I also remembered as I was watching the end that yes, offset = cycleLength*0.5 is the only workable one I found - until you have so many sections that offset*sections > cycleLength*9 or thereabouts, but then the simulation ebcomes unwieldy to use practically. Or, in your case, you run out of plastic and servos.

  • @johnbennett1465
    @johnbennett14657 ай бұрын

    As long as you don't mind it only going in one direction, I think asymmetric gripper feet would work better. I.e. the front being a smooth curve giving low friction. And the back being vertical with a sharp angle. Obviously this would need a surface with some give to it. So carpet or many types of outdoor surfaces.

  • @alanklenk8608
    @alanklenk86087 ай бұрын

    Not sure if you considered this, but could you make each roller Uni-directional, so they would always pull when the concertina mechanism contracts?

  • @pownaz3119
    @pownaz31197 ай бұрын

    The worms actually have a part of their body expanding, and then at the same time contract. Also parts of a couple of nodes that are expanded at the same time. Maybe you can have the walking animation only use a part of their lateral movement, and have the 'extra' room to work in groups

  • @ws6002
    @ws60027 ай бұрын

    May I suggest replacing the rollers with brushes with angled bristles? Rollers move more or less forwards and back with equal ease. Don't you want something where the forces on the ground have a directional preference?

  • @clown134
    @clown1347 ай бұрын

    you should look at a worm for refrence. it works in sections. you should try first two at like a 500ms delay, and then the next two at like a 1000ms second delay from that, but with a 500ms delay from eachother

  • @NeUrOmAnCeRAI
    @NeUrOmAnCeRAI7 ай бұрын

    The spice must flow.

  • @Haigotron
    @Haigotron7 ай бұрын

    For a second I thought it was you in the thumbnail and was shocked a the size of the robot! :D

  • @jamesbruton

    @jamesbruton

    7 ай бұрын

    Action Man FTW. I Want to make it bigger!

  • @yanshanzhou2164
    @yanshanzhou21647 ай бұрын

    The man with not enough 3d printers.

  • @xiaoshizi131
    @xiaoshizi1317 ай бұрын

    Nice to see the progress of an earthworm into Minecraft's lookalike digitalised reality. Some less sturdy connection between the sections could have brought the rolling bars back to earth😉 Would love to see some generative design in your printed products to use less filament than rectangular blocks. Would give it a more calculated, pre-thought form 😉

  • @MatchaBarnes
    @MatchaBarnes7 ай бұрын

    I wanna see a race of all James' different type of locomotive robots.

  • @sirsplintfastthepungent1373
    @sirsplintfastthepungent13737 ай бұрын

    Brilliant idea, but perhaps have them expand and contract in sequential order with overlapping cycles, 1234 (All contracted) 123 4 (4 to 25% extension) 12 3 4 (3 to 25%, 4 to 50%) 1 2 3 4 (2 to 25%, 3 to 50%, 4 to 75%) But I think the ends will need a brake system of some kind to anchor the end going forward and grappling the rest along behind. For maximum efficiency, I suggest a reach / anchor / reach approach.

  • @dallenlofgreen5331
    @dallenlofgreen53317 ай бұрын

    My 5 year old wants to get into robotics. Can you recommend any starter kits or projects?

  • @revtmyers1
    @revtmyers17 ай бұрын

    Nice design. Possibly larger scale, rollers that ratchet only one direction as they roll forward with more grip.

  • @littlesnowflakepunk855

    @littlesnowflakepunk855

    7 ай бұрын

    The main problem I can see with that idea is that it would roll downhill if it were facing downhill.

  • @dropkickedmurphy6463
    @dropkickedmurphy64636 ай бұрын

    If you wanted, you could have changed the beams to be right angles, resulting in extended and contracted length being the same length. Henry Segerman did a video on something similar to what I am describing.

  • @peter360adventures9
    @peter360adventures97 ай бұрын

    Awesome.

  • @GadgetAddict
    @GadgetAddict7 ай бұрын

    It reminds me of the machine that's used for building bridges.

  • @deadline1746
    @deadline17467 ай бұрын

    Perhaps if the round sections on the bottom had slight rachet gearing; it might easily slide one way but encounter more resistance the other. Not sure how you'd do it but hey.

  • @NOLAfugee
    @NOLAfugee7 ай бұрын

    Instead of a second motor, you could add something to lock the moving parts to one end or the other. It might become lighter and more energy efficient.

  • @maxximos2960
    @maxximos29607 ай бұрын

    soooo, give it some sensors and compile openworm project for it?

  • @nirodha7028
    @nirodha70287 ай бұрын

    Idea: just two (grippy) rollers per section. Both are on their axles with one way bearings. In opposite directions. Uppon moving towards each other the front roller cannot roll backwards so it pulls the section forward. On extension the back wheel cannot roll backwards so it pushes the section forwards. Wouldn’t this make an extremely simple solution for peristaltic movement? You could keep three wheels if really needed by making the central roller free to rotate in both directions.

  • @lordsqueak
    @lordsqueak7 ай бұрын

    I like the idea at the end with the "feet", but maybe it can be more leg-like with a knee instead of ankle?? I think it would really cool with a line of legs trampling forwards. Another suggestion would be to use 3 different phases instead of just 2, since it's hard to define a movement direction with just 2 phases. ♥

  • @notconnected3815
    @notconnected38157 ай бұрын

    Off-Topic: What do you robot-guys think about the "twisted string actuator"? A cheap actuator for mass production?

  • @ZappyRedstone
    @ZappyRedstone7 ай бұрын

    A couple ideas to consider number one more sections this should help with the stress on the front and back. Observe how it is done in nature more detailed that way you can get the timing right

  • @DeathByRabbit
    @DeathByRabbit7 ай бұрын

    This made me think: What if you were to make rideable robots that took the form of fantasy creatures that could be solar powered? Imagine being able to make them light, but sturdy, enough to carry folks around town using only solar energy. I mean I personally would love one lol

  • @oakenarbor2046
    @oakenarbor20467 ай бұрын

    Could this be the machine depicted on Hadrian's Column?

  • @raphaelradespiel9970
    @raphaelradespiel99707 ай бұрын

    What!?!? The two feet robot sounds amazing to look at

  • @jamesbruton

    @jamesbruton

    7 ай бұрын

    I'm seriously considering it

  • @lyrag6376
    @lyrag63767 ай бұрын

    Maybe implement some telemetry and you could do some reinforcement learning to optimize timing? Then use that understanding to make the full-sized version as good as it can be

  • @MeleeTiger
    @MeleeTiger7 ай бұрын

    Maybe a snake would be another yet similar form of locomotion to examine for this kind of build? With something along the belly of the robot/vehicles moving instead of the whole body acting like an accordion? Probably with slots in the belly, and fins or such that move in an offset circular motion so they come down and pull/push forward or backward?

  • @BrickRoom7
    @BrickRoom77 ай бұрын

    Looks like you are using linear interpolation for this. Were you using linear interpolation for open dog too?

  • @jamesbruton

    @jamesbruton

    7 ай бұрын

    Yes

  • @Leo99929
    @Leo999297 ай бұрын

    Could you use sprag clutches to lock the rollers in one direction? You're rollers look like the problem here. Like you said, the worms have one way hairs to help them move forwards.

  • @DarkestVampire92
    @DarkestVampire927 ай бұрын

    In the year 2035, we will all commute to work on our own personal robot worms.

  • @benchatfield3529
    @benchatfield35297 ай бұрын

    If you made slanted feet like a hexbug out of tpu to replace the wheels it might stop it from moving backwards like the hairs on a worm

  • @MH_Binky
    @MH_Binky7 ай бұрын

    I think the original way of doing it is more visually interesting, where the movement is done in pairs of sections, keeping the total width between the two sections the same, and having one thin section at a time moving backwards along its body, rather than doing it in pairs with a walking kind of motion. Perhaps with some kind of structure to keep the joints level with each other. I think it would be an interesting challenge to design such a structure than still allows it to turn.

  • @user-pj4oj5rw9d
    @user-pj4oj5rw9d7 ай бұрын

    nice

  • @nolanrjones
    @nolanrjones7 ай бұрын

    The small sections of the belly of snake and worms move more like a Strandbeast foot motion.

  • @taleg1
    @taleg17 ай бұрын

    Move the stem all the way forward, then move the first segment, when that is done going forward, move the next and so on, that way you are only moving one segment at a time while the rest supports the move. Or that's what my mind keep telling even if I really don't have a clue :D

  • @CSAlso2
    @CSAlso27 ай бұрын

    Why no just make wheels that only run in one direction? So they only roll forward?

  • @mort2k
    @mort2k7 ай бұрын

    Motorized strandbeest, tried that?

  • @gazorbpazorbian
    @gazorbpazorbian7 ай бұрын

    would love to see this as a soft printable robot

  • @FuchsDanin
    @FuchsDanin7 ай бұрын

    You have a motion system which operates in three phases. You need three worker groups, each group on a separate phase, each member of the group executing its phse in parallel. Group A B and C, with ideally 2+ members per group.

  • @LittlePixelTM
    @LittlePixelTM7 ай бұрын

    Feels like the concertina bits are hindering the overall movement, and removing two of the yellow cylinders so they are more leg like would actually improve the locomotion

  • @surfcello
    @surfcello7 ай бұрын

    I think your original design is the way to go, where the segments get longer as they get thinner and lift off the floor. Except you’d need many, many more to make it work fluidly. There should be at least two ot three contact points with the ground at any one time, and the mass should translate from one contact point to the one ahead like in a slinky.

  • @jeffreynerdin3522
    @jeffreynerdin35227 ай бұрын

    This doesn’t seem to actually be moving by peristaltic motion. It looks like the concertina sections are just a mechanism to lift each leg (or two at a time), move it forward and then set it down, so it’s actually just walking. Am I wrong?

  • @Beikenost
    @Beikenost7 ай бұрын

    would be cool of you wrapped it around in some type of fabric to make it look like a huge terrifying worm instead of the robot parts showing.

  • @H34...
    @H34...7 ай бұрын

    I don't know why but the 500ms delay seemed a bit more centipede like to me than the 1500ms delay. Not to say it's more effective, maybe more organic is the word? I get the feeling this sort of thing gets more effective wit more segments, so the effect of the ends is minimized.

  • @RupertBruce
    @RupertBruce7 ай бұрын

    This reminds me of the beach walking windmills...

  • @Dylan-kw8pz
    @Dylan-kw8pz7 ай бұрын

    What about like 30 feet that lift up and move a few inches forward then place down in a wave

  • @AlRoderick
    @AlRoderick7 ай бұрын

    What about airbags? Rubber pads on the bottom that can inflate and deflate, so when they're trying to grip the ground they puff up. But when they're trying to be dragged freely, they deflate. If you did a flow through system where they're fed by an air compressor and then let the air out when they deflate that might be too noisy, so instead you could do a big air cylinder like a syringe that would be actuated by a motor, so each bag would have its air circulate back and forth between the bag and an accompanying air cylinder on each segment.

  • @books96book0
    @books96book07 ай бұрын

    I'd be interested in seeing the timing 90 degrees out of phase.

  • @tomholroyd7519
    @tomholroyd75197 ай бұрын

    You have adequate ventilation in that print room, right? You are breathing microplastics if not

  • @raymtechstudios3001
    @raymtechstudios30017 ай бұрын

    When tripod walker update?

  • @karlexceed
    @karlexceed7 ай бұрын

    With the lifting motion, the expansion along the length seems to be mostly irrelevant. It reminds me of the walking motion of those old cheap robot toys, just placed along a worm.

  • @Eagle3302PL

    @Eagle3302PL

    7 ай бұрын

    Yeah, there is no Peristalsis happening here, if's just some simple legs in a row.

  • @Ozmandius
    @Ozmandius7 ай бұрын

    make the rollers roll.. and use sprag clutches?

  • @jamesbruton

    @jamesbruton

    7 ай бұрын

    I think a bigger version would need that

  • @nonoyorbusness
    @nonoyorbusness7 ай бұрын

    I saw a worm upon the ground, Wriggling on its belly, I watched a while, then gave a smile, And squashed it with my welly. Anon.

  • @ShawnChristopher10101
    @ShawnChristopher101017 ай бұрын

    I think the feet should've been made out of TPU. I can't think of how much friction was lost to sliding on that tile.

Келесі