Appreciated the video content? Want to show some love? Hit the Thanks button under the video or hit up my PayPal tip jar: PayPal.Me/TSGReel

Thank you so much! I just disassembled, cleaned and reassembled my Penn Pursuit III 5000 LE reel successfully. I surf fish and my rod been submerged. I rinse it off with water but I noticed when feeling it was hanging up some. So I watched your video many times, took pictures when breaking reel down and took notes with each step. I have never seen the inside of a reel until now. When I took the cover off I was shocked at the corrosion and sand inside mixed in with the reel grass. I am amazed my reel worked at all. I had to do a thorough cleaning. I used an entire can of WD-40, lots of Q-tips, soaked the rotors in WD-40 overnight. Let them air dry. Then used fine sand paper because there was some pitting of the metal rotors. I was able to smooth them out. Oil and greased everything good. I have to say I had a problem with the drag when I purchased it but didn't know enough about reels to know better. The drag now is loose like it should be when I loosen it. So now I know what to expect. THANKS AGAIN!!!!!

@TSGReelService

2 жыл бұрын

Excellent news, Janet! Glad to hear the video helped you get the reel fixed up and you now have confidence in it. Great job of taking notes and pics along the way! I loved your comment on how surprised you were it even worked at all.... this is the norm, so don't feel bad... which is why routine services are good. It's amazing the places sand, grime and salt can end up. Check out my video on how to restore your bearings... you may find it useful: kzread.info/dash/bejne/mniMktxxaZyre6Q.html More vids to come. Spread the word about the channel.

Thank you bro 🎉 appreciated FROM TRINIDAD AND TOBAGO

@TSGReelService

15 күн бұрын

You're welcome and thanks for watching! Share the love by spreading the word about the channel.

Great and easy to understand video!

@TSGReelService

Ай бұрын

Thanks and thanks for watching! Glad you appreciated it. Spread the word about the channel.

Great video. Thank you.

@TSGReelService

10 ай бұрын

You're welcome and thanks for watching! Spread the word about the channel.

Hello Barry, that was interesting, line roller at 14.18 , there was no ball bearing, just a teflon bushing. Hmmmm... I remember, in a reel spinfisher the small pivot arm was broken ( at 12.55 ) . I quickly made a new one out of stainless steel. My wife is still looking for her stainless steel knife. Lmao.🤣🤣🤣😉😉 You did a good job on that reel , it is as good as new now. 👍🏼👍🏼👍🏼👍🏼👍🏼👍🏼👍🏼🐟🐟🐟😀😀😀

@TSGReelService

3 жыл бұрын

Lol @ your wife still looking for her knife!!! Crafty use of the knife. I'm not sure why I thought there was a bearing in the line roller, but it won't be the last time I get something wrong. Lol. Thanks Jan!

Thanks for sharing

@TSGReelService

Ай бұрын

You're welcome and thanks for checking out the video. Spread the word about the channel.

Muito obrigado, seu vídeo foi fundamental para o sucesso da minha manutenção 🇧🇷

@TSGReelService

Ай бұрын

You're welcome and thanks for watching! Glad to hear it helped. Spread the word about the channel.

thank you awesome video.

@TSGReelService

3 жыл бұрын

Thanks! Glad to hear you found it useful. More reel breakdowns in my library. Spread the word about the channel.

Thx so much mine broke this is so helpful

@TSGReelService

3 жыл бұрын

You're welcome and thanks for watching, Brayden. Glad to hear it helps. More vids to come.

Thank you for sharing 👍

@TSGReelService

Жыл бұрын

You're welcome and thanks for checking out the video.

I took mine to the beach and the wife must have been trying to dig up hermit crabs with it. So much sand inside you could of made a sand castle. Thanks for the help.

@TSGReelService

3 жыл бұрын

LOL!!!! That sucks, but is really funny. Thanks for checking out the video. Glad to hear it helped! Only thing left is to try and find a way to keep it out of the sand when it's in your wife's hand. 🙂

I had tried to cleanup a pursuit 6000 last year following this video and things didnt work out, I kept all the parts together. I tried it again today and have a working reel now thanks for this thorough and well explained video. Two things which I had to fix were a rusty jammed AR and a dent in the body misaligning the gears.

@TSGReelService

Жыл бұрын

You're welcome! Glad to hear you got your reel working again! More vids to come!

Nice tutorial. Now I know how disassemble the reel. Now I need a tutorial on how to disassemble a rusted reel. I cannot get the stack on the pinion off. Its only slightly rusted on the inside. This reel is shot but I need the pinion for another reel. Nothing on the pinion budges...Broke the pinion trying to get the last peice off

@TSGReelService

2 жыл бұрын

Thanks for watching! Don't be misled by "just a little rust". There are a few ways to free the stack, but you've nullified a couple by damaging the pinion. Do a search for "tsg reel service frozen" for more help.

Great video. When i opened mine it was saturated with grease. Just so much grease and gunk. Tnx man

@TSGReelService

3 жыл бұрын

You're welcome and thanks for watching! Glad to hear it helped. More vids to come. Subscribe, if you haven't already done so, and spread the word about the channel!

You can also clean the anti-reverse nut with WD-40 and remove the rust on the inside and it probably work again.

@TSGReelService

2 жыл бұрын

Thanks for watching and your input. Yes, but it's only a temporary fix. See my recent BG 4000 video for a discussion on this specific issue. Spread the word about the channel. More vids to come.

Can I use any grease like bearing grease.for drag washer touch up?

@TSGReelService

2 жыл бұрын

Thanks for watching! I wouldn't.

como faço pra comprar anti reverso penn pursuit 5000 não sei o tamanho exato ??

I’m having an issue with my bail closing mid cast and breaking off some very expensive lures. What’s the best way to keep the bail from closing automatically?

@TSGReelService

2 жыл бұрын

Thanks for watching. What reel is it? Is the bail damaged? How long have you had the reel and did you always have that issue with it?

@blizzington4528

2 жыл бұрын

@@TSGReelService sorry I’m getting back so late. The reel is brand new I’ve only took it out maybe 3-4 times max because 2 of those times I lost lures from the bail closing. My first time it was working wonderfully. But it shouldn’t have damage at all.

Great video. Very helpful. But I think you should change the camera angle to the opposite side so it gives us the view as we would see it, instead of from this angle. Would help us to see and understand better.

@TSGReelService

3 жыл бұрын

Thanks for watching and your feedback. Glad to hear you found the video useful. The camera angle is the best option for my current setup, but have plans to adjust that at some point in the future. Spread the word about the channel.

Great video! I serviced my reel and it runs smoothly until you put the handle on and then you get a grinding noise. Any ideas?

@TSGReelService

Жыл бұрын

Thanks for checking out the video. Yes, the gears are too smooshed together. Play with the shims on your main gear.

@patrickhershey3134

Жыл бұрын

@@TSGReelService It was the shims. Now, it runs super smooth. Thank you!

@TSGReelService

Жыл бұрын

@@patrickhershey3134 excellent! Happy to hear we got it resolved! Enjoy the reel!!!

Also I have a question. I seem to have dropped/ lost the wire that would go over the brass looking ring @ minute 25:45 what will that affect since I cant find it? 😯

@TSGReelService

3 жыл бұрын

It affects the backup dog... doesn't affect the performance of the reel.... unless your a/r clutch fails. 🙂 You should be fine... leave the brass ring on the pinion, but remove the black arms for the backup dog... parts 4 and 10 on your schematic if you want to use it while you wait for the replacement spring you lost.

@macdragonjr

3 жыл бұрын

@@TSGReelService do you mean the arm @ 19:50 or 31:30 . Or both?Aslo where can buy the part?

@TSGReelService

3 жыл бұрын

Yes, exactly. 19:50 is the dog (back up) and 31:30 is the auto-engage arm. When you remove the dog in 19:50, remove the spring underneath it also (forgot to mention that before). If/when you get the replacement spring that goes around the gold ring on the pinion, you can refer back to this video for how to reset all of them properly. You should also take pics when removing the pieces, just in case.

@macdragonjr

3 жыл бұрын

Can these parts affect the anti-reverse function? The antirevers dont work at all now since putting back together. Spool just spins freely in either direction. Idk if it does or if I may have done something when fitting back together or if anti-reverse clutch is now done as it seems to be going bad before.

@TSGReelService

3 жыл бұрын

Not if you did what I recommended. If your a/r clutch was already going bad before you opened it up, you should replace it. May as well order the spring you lost while you're at it.

Donde puedo comprar el antireversa del penn pursuit 3 6000?

@TSGReelService

10 ай бұрын

Check eBay.

What kind of grease do you use?

@TSGReelService

3 жыл бұрын

Thanks for watching. I use Penn blue grease most of the time.

Is there a rebuild kit that Penn sells?

@TSGReelService

4 ай бұрын

Thanks for checking out the video. What are you looking to rebuild?

@emtae3

4 ай бұрын

@TSGReelService this same reel. Someone has it for sale for parts. Was thinking about buying it and maybe rebuilding if possible?

@TSGReelService

4 ай бұрын

@@emtae3 Sure, you could buy it and rebuild it.... you can use mysticparts to source the parts you need to replace after examining it. All the best with it.

You got any videos on removing the bail trip for the penn pursuit 3?. Or any tips to "cast around it" I can't get a decent cast to save my life with the trip on.

@TSGReelService

Жыл бұрын

Thanks for checking out the video! Yes, you can file down the trip ramp on the housing..... this might help, but may not completely eliminate the problem. You can also try replacing the bail spring.

@B_smokin187

Жыл бұрын

@@TSGReelService is there any way to completely eliminate the issue or are those my best options. Great videos by the way. I appreciate the knowledge.