Great stuff! This is a big help. Thank you for answering comment questions as well. I'll spread the word about TSG for sure.

@TSGReelService

6 ай бұрын

You're welcome and thanks for checking it out. Glad to hear you found it helpful.

Just wanted to say thank you for the video, very indepth and professional. Exactly what I needed. 🤙

@TSGReelService

7 ай бұрын

You're very welcome and thanks for watching! Glad to hear it helped. Hit the thumbs up and spread the word about the channel.

fantastic as usually

@TSGReelService

Жыл бұрын

Thanks brother! Barry.

Great Video! Thank you!

@TSGReelService

Жыл бұрын

Thanks Jimmy! Next one's up by Friday.

Barry, Great tutorial! Have a Great Weekend! Tad

@TSGReelService

Жыл бұрын

Thanks Tad! Sorry for not getting back to you sooner, I was a little busy this weekend, and just checking messages now. Hope you had a good one!

Thanks again for a great video. Do you have a link to the tools that you are using routinely in the About or community pages for your videos?

@TSGReelService

Жыл бұрын

Thanks sir! No, but I'll work on getting one up within the next few months. I do have links for sellers on eBay that supply general and hard to find reel parts..... check my community posts.

Appreciated the video content? Want to show some love? Hit the Thanks button under the video or hit up my PayPal tip jar: PayPal.Me/TSGReel

Thanks for the videos. I replaced my main gear and crosswind gear on a pursuit IV 4000. Do you have any idea why it’s binding up at the top or bottom of the crosswind block’s throw? Everything else looks fine and I’m certain it’s assembled properly.

@TSGReelService

Жыл бұрын

Hi Mills, thanks for checking out the video.... it could be your shaft is bent or the shimming on your main gear..... try removing the thinnest one (then more if needed) and seeing how that feels.

@mills1434

Жыл бұрын

@@TSGReelService I can’t tell that the shaft is bent but it does kinda hang up. Also went ahead and ordered another main gear because it may be the wrong one. Anyways, Thank you for your help.

@23:03 you spun the reel to get a feel if it was too tight or not. If it didn’t spin freely does that mean the crosswind gear is too tight, the rotor nut is too tight, or the housing screws are on too tight? Or would it be something else? Thank you in advance!

@TSGReelService

10 ай бұрын

Thanks for watching and noticing the details. I was checking the shimming.... sometimes, when you service your reel, you need to adjust your main gear shims (maybe taking one off) for the reel to feel smooth. Hope that helps. Spread the word about the channel.

@Rooki3_

10 ай бұрын

@@TSGReelService got it, thank you for the reply. I did notice my main gear shim ended up being three super thin shims. Luckily I didn’t have to remove any, the reel spun well. Btw, Just finished servicing a pursuit iii 4000 cause of you. Thank you!! I will definitely spread the word about your channel.

@TSGReelService

10 ай бұрын

Excellent news! Glad to hear it's resolved and that you were able to get another reel done also. Thanks in advance for spreading the word about the channel.

I have a two month old Penn Pursuit iv 2500 that spins with noticeable drag/stiffness compared to my buddies. Do you think it would be wise to follow these steps for a complete rebuild or is there something else that commonly causes this? To be honest I think it was this stiff from factory.

@TSGReelService

9 ай бұрын

If it was stuff from the factory, you may have had a dud. Try reaching out to Penn directly to see if they'll replace it. However, it didn't start out that way (which I suspect), it's probably a bearing.... pinion or main. Could be other things, but that's the usual suspect.

@JoePeanuts68

3 ай бұрын

Same happened to mine. I have 2 Penn Pursuits, and both corroded very quickly on the outside, not allowing me to open them, and then both are tough to reel and skip.

Good day! In your opinion, Daiwa Certate 4000 5.2 or 6.2? I don't know what to choose 😮 only one parameter important for me - durability 😅

@TSGReelService

Жыл бұрын

They're both as durable as the other. What are you using the reel for?

@iCrocodile

Жыл бұрын

@@TSGReelService freshwater, silicone light/medium jig, lures, twitching. Pike and other same predators

@TSGReelService

Жыл бұрын

So you want a do it all reel and not a technique specific reel.... you can make either one work.

@iCrocodile

Жыл бұрын

@@TSGReelService Yeap i can do it )) So there is no difference in reliability?

I’m having trouble with my gears making noise after reassembly, should I just add more grease?

@TSGReelService

Жыл бұрын

Thanks for watching! No.... what do you mean making noise? Please describe the sound/feel in detail.

@liamjoy1369

Жыл бұрын

@@TSGReelService it feels like it’s wobbling around, definitely not as tight as before, when I crank the reel in

@TSGReelService

Жыл бұрын

Sounds like you really messed something up along the way if ALL your gears are wobbling. Take it to your local repair shop for help putting the reel back together properly.

@liamjoy1369

Жыл бұрын

@@TSGReelService not all My gears are they’re just making a growling noise sometimes…he said I probably just aligned the gears wrong, it’s only 2 gears I believe… he’s saying I “need” to buy all new gears though… what do you think?

@TSGReelService

Жыл бұрын

The above, although still incomplete, gives me a much better understanding of your problem. I ask for specifics because I need specifics if all I'm going on is the written word. Yes, your mg and pg are probably misaligned, and you notice a rough spot(s) when you crank. All gears wear in a certain pattern..... the longer and more you use the reel without servicing it, the more noticeable it'll be when you put them in "unaligned" after servicing the reel. I have a video that I don't think is out yet, that details this. You may not need new gears, but you also probably can't fix this yourself without a lot of trial and error, since your problem may be two fold..... shimming and alignment. So, if you want the problem to go away, best to bite the bullet and take it to him (since he either examined the reel or had a phone conversation with you)..... especially if you don't understand some of what I'm saying/referring to in this message.

Berapa diameter one way

@TSGReelService

Жыл бұрын

Don't know. Use the schematics to find and then order the part number from a trusted supplier.

great video. Sadly, realized the reel was unrepairable. Had it for one year and the outside of the body totally corroded. Don't recommend Penn, especially for the price!

@TSGReelService

3 ай бұрын

Thanks! Sorry to hear your reel was too far gone. That a common issue with the Pursuit, Fierce, and even Battle, if they aren't washed down well after each use... hope you have better luck with the next one. See this for a simple tip you can do, in addition to washing it down, to help prolong it's life in between services: kzread.info/dash/bejne/hZWsj6h8qMbWo84.html