PDEB250 Plastic Pipe Chamfering Tool Demo - Reed Manufacturing
Reed’s Cone Chamfer Tool efficiently chamfers the inside or outside diameter of multiple plastic pipe sizes, including metric pipe sizes, with one tool. Learn more: www.reedmfgco.com/en/products....
Chamfer pipe and be ready for glue in seconds. Generally used with a drill, the removable 3/8” hex shaft also permits manual operation. The Plastic Pipe Chamfering Tool is designed for PE, PVC, CPVC, PEX, ABS and PP pipe. The tool’s hardened steel blade is sharp and durable, providing a fast chamfer result in seconds, with smooth edges. For best results, replace blade as needed.
Browse all Reed plastic pipe tools: www.reedmfgco.com/en/products....
To learn more about Reed, to browse all products, or find where to buy, visit our website: www.reedmfgco.com.
Please contact us with any questions: www.reedmfgco.com/en/contact-....
To stay up to date on our latest product demos, please subscribe to our channel.
Let’s Connect!
Facebook: / reedmanufacturing
Twitter: / reedpipetools
Instagram: / reedpipetools
Пікірлер: 13
Are you able to make custom variant of this for use on up to 2 3/4" aluminum tubing???
@ReedPipeTools
Жыл бұрын
No, we cannot make a custom size. If you happen to be chamfering the ID of your 2 3/4" aluminum, this will probably fit.
We need this kind of Cone Chamfer Tool for 4 inch and 6 inch PVC pipes. Do you have it?
@ReedPipeTools
3 жыл бұрын
REED has a manual tool for 4" - 6" pipe. Here is the link: www.reedmfgco.com/en/products/plastic-pipe-tools/bevelers/
@harshpatel3500
3 жыл бұрын
@@ReedPipeTools Thank you for the prompt response. Does it works to do chamfer on the I.D as well? Or suggest any tool for ID chanfering (PVC 4 inch & 6 inch)
@ReedPipeTools
3 жыл бұрын
@@harshpatel3500 For ID and OD - you want the new REED Bevel Boss. That starts at 2" and works on PVC. It goes up to 20" PVC and even 24". Check it here: www.reedmfgco.com/en/products/plastic-pipe-tools/bevel-boss-cordless-pipe-bevelers/ There are a couple Bevel Boss videos here on our KZread channel.
Goste
so its a chamfer and a deburring tool ?
@ReedPipeTools
3 жыл бұрын
Yes. REED considers a chamfer tool to be one that applies a consistent size bevel all around the pipe. Since this is drill-powered, and fast, it does apply a consistent size bevel. Deburring can be a bit less precise in its final result. Since this tool chamfers, it also deburrs. And, you can use it for ID and OD on the pipe.
Why won't someone make this for 3" pipe? Most construction jobs are requiring schedule 80 pipe so when you install a bell end and pull wire through it hits the inner wall edge of the pipe. Need to bevel it to match the ID of schedule 40. Every construction job in the solar industry is having this problem. The only advice we get is use a manual tool (can't happen too many pipes) or use a router bit (again... too many pipes). Nobody has a real solution to this massive problem.
@ReedPipeTools
Жыл бұрын
Check out our PB3 chamfer tool: www.reedmfgco.com/en/products/plastic-pipe-tools/drill-powered-chamfer-tool/pb3/ Or Bevel Boss® Cordless Pipe Beveler: www.reedmfgco.com/en/products/plastic-pipe-tools/bevel-boss-cordless-pipe-bevelers/
Costs over $100.00. No thank you.
@ReedPipeTools
Жыл бұрын
While it is a higher price, it can be used for both inner and outer deburring.