Building a 450HP Cummins for a 1986 K3500 Swap Part 1
Жүктеу.....
Пікірлер: 44
@jamesmarlar6966 ай бұрын
Nice and he is fortunate to get to learn about his truck . No better way to appreciate what you have than to be responsible for building it.
@73cjproject6 ай бұрын
So much great content all in one video. Love it. Thanks for keeping us in good content.
@horsetorquesdiesel
6 ай бұрын
Glad you enjoy it!
@user-jv7kr1rg5kАй бұрын
Good job big boss 👍💯💯
@bert50036 ай бұрын
love this type of content and format. definitely learned a thing or two i may use in my own junk.
@Bradzuzu2 ай бұрын
Good stuff thanks for making the video !! I'm going to be going through my donor engine very soon an will set the engine up on my stand that way looks way safer ..
@slowaf12v6 ай бұрын
Great Build Content Josh!!!
@horsetorquesdiesel
6 ай бұрын
Appreciate it!
@N.A.J.6 ай бұрын
“Promise I can. I got two trophies.” Put that on a shirt. Great video.
@cumminsnchevy6 ай бұрын
Lookin good Josh! Glad Donald decided to put some studs on. My favorite method for remembering firing order on inline diesel 6’s is 15 is too young 36 is too old but 24 is just right👌🏻🤣
@horsetorquesdiesel
6 ай бұрын
Mine too but kept the video PG 😂
@jimmungai19384 ай бұрын
I’m getting my old 12 valve for mine first GEN Rebuild a DNJ machine in Cambridge Ohio. Those guys seem like they really know what they’re doing down there all right this is six in a row.Jim from Kenner, Dale, Pennsylvania
@bwizzy92183 ай бұрын
“Who am I kidding” 😂😂
@ppvfd1216 ай бұрын
Love to see this ol 12 valve getting some TLC
@t3dieselperformancerepair2286 ай бұрын
Great stuff rtv the best!!
@horsetorquesdiesel
6 ай бұрын
It sure is!
@BCnAK6 ай бұрын
Keep it up sir!!
@horsetorquesdiesel
6 ай бұрын
We will
@dbfabworks53206 ай бұрын
Awesome!!!!!!!!
@hankclingingsmith87074 ай бұрын
The trick is to torque each one as you replace them. The order of replacement does not matter
@Oneleggedstallion6 ай бұрын
Ole pockets showed up
@brianpuff90216 ай бұрын
I checked out Manton new roller rockers,5 gran!!!thats crazy!!!!!
@witcher71
6 ай бұрын
Everybody is off their rocker with prices.
@baconcreek6096 ай бұрын
If your being cheap on the tappet cover, super glue it to the cover and also to the block.
@TheProchargedmopar6 ай бұрын
👍💪
@baconcreek6096 ай бұрын
Daguum, you got me wanting to build another engine....
@horsetorquesdiesel
6 ай бұрын
Do it
@JRasS146 ай бұрын
Just did this in the truck. Not a good time Definitely loctite guys, crazy how many bolts felt loose. My kdp was still sitting tight
@baconcreek6096 ай бұрын
26° timing rattles the old 12v pretty good.
@c-man6376Ай бұрын
What rtv do you use or recommend? Looks like the "right stuff" based on the can but is it the black or the gray?
@fabianpendl35573 ай бұрын
Fun fact about xotic headstuds. They’re actually Canadian made not Chinese lol
@Altekameraden795 ай бұрын
My 380,000 mile 12v has suddenly started blowing by and hazing regardless of rpm. I don't have a shop to do the work myself inside as I am in Wyoming. So I'm starting to price long block builds. Both with and without install.
@_astralxinfluenced_27994 ай бұрын
Do all Cummins have the wear ring from the rear main, or just the 12v's?
@fernandolouismiramontes25203 ай бұрын
Does the 5.9 need an ecu at this power level to run or is it possible to be all mechanical injection still?
@matthewgarcia40816 ай бұрын
Hey justin I’m 24 just tryna learn what I can, want to do similar upgrade’s to my 12v Cummins,never done motor work before in that depth but I’m eager to learn, would you recommend a specific service manual to read and follow as a guideline? (Any tips or advice would help)
@horsetorquesdiesel
6 ай бұрын
Honestly dig up the old comp d and Cummins forum threads! A lot of good info
@melvinwilley30876 ай бұрын
I’ve used the xotic studs on 6.0 power stroke’s with great results
@chandlerlofton65366 ай бұрын
Does the engine stand bolt right up on the side like that? I had mine mounted from the back before I sent it to the machine shop. It was a little sketchy.
@horsetorquesdiesel
6 ай бұрын
It uses 3 bolts and it bolts to the holes in the block that use the engine mounts
@chandlerlofton6536
5 ай бұрын
@@horsetorquesdiesel sweet! I’m going to do it that way when the block comes back. I think I have the exact same stand you are using.
@Scott_Buchanan2 ай бұрын
What’s the hp/tq limit on a ve pump 12 valve?
@jamesebanks55436 ай бұрын
New valve seals ?
@horsetorquesdiesel
6 ай бұрын
Nope these looked perfect! But definitely check them!
Пікірлер: 44
Nice and he is fortunate to get to learn about his truck . No better way to appreciate what you have than to be responsible for building it.
So much great content all in one video. Love it. Thanks for keeping us in good content.
@horsetorquesdiesel
6 ай бұрын
Glad you enjoy it!
Good job big boss 👍💯💯
love this type of content and format. definitely learned a thing or two i may use in my own junk.
Good stuff thanks for making the video !! I'm going to be going through my donor engine very soon an will set the engine up on my stand that way looks way safer ..
Great Build Content Josh!!!
@horsetorquesdiesel
6 ай бұрын
Appreciate it!
“Promise I can. I got two trophies.” Put that on a shirt. Great video.
Lookin good Josh! Glad Donald decided to put some studs on. My favorite method for remembering firing order on inline diesel 6’s is 15 is too young 36 is too old but 24 is just right👌🏻🤣
@horsetorquesdiesel
6 ай бұрын
Mine too but kept the video PG 😂
I’m getting my old 12 valve for mine first GEN Rebuild a DNJ machine in Cambridge Ohio. Those guys seem like they really know what they’re doing down there all right this is six in a row.Jim from Kenner, Dale, Pennsylvania
“Who am I kidding” 😂😂
Love to see this ol 12 valve getting some TLC
Great stuff rtv the best!!
@horsetorquesdiesel
6 ай бұрын
It sure is!
Keep it up sir!!
@horsetorquesdiesel
6 ай бұрын
We will
Awesome!!!!!!!!
The trick is to torque each one as you replace them. The order of replacement does not matter
Ole pockets showed up
I checked out Manton new roller rockers,5 gran!!!thats crazy!!!!!
@witcher71
6 ай бұрын
Everybody is off their rocker with prices.
If your being cheap on the tappet cover, super glue it to the cover and also to the block.
👍💪
Daguum, you got me wanting to build another engine....
@horsetorquesdiesel
6 ай бұрын
Do it
Just did this in the truck. Not a good time Definitely loctite guys, crazy how many bolts felt loose. My kdp was still sitting tight
26° timing rattles the old 12v pretty good.
What rtv do you use or recommend? Looks like the "right stuff" based on the can but is it the black or the gray?
Fun fact about xotic headstuds. They’re actually Canadian made not Chinese lol
My 380,000 mile 12v has suddenly started blowing by and hazing regardless of rpm. I don't have a shop to do the work myself inside as I am in Wyoming. So I'm starting to price long block builds. Both with and without install.
Do all Cummins have the wear ring from the rear main, or just the 12v's?
Does the 5.9 need an ecu at this power level to run or is it possible to be all mechanical injection still?
Hey justin I’m 24 just tryna learn what I can, want to do similar upgrade’s to my 12v Cummins,never done motor work before in that depth but I’m eager to learn, would you recommend a specific service manual to read and follow as a guideline? (Any tips or advice would help)
@horsetorquesdiesel
6 ай бұрын
Honestly dig up the old comp d and Cummins forum threads! A lot of good info
I’ve used the xotic studs on 6.0 power stroke’s with great results
Does the engine stand bolt right up on the side like that? I had mine mounted from the back before I sent it to the machine shop. It was a little sketchy.
@horsetorquesdiesel
6 ай бұрын
It uses 3 bolts and it bolts to the holes in the block that use the engine mounts
@chandlerlofton6536
5 ай бұрын
@@horsetorquesdiesel sweet! I’m going to do it that way when the block comes back. I think I have the exact same stand you are using.
What’s the hp/tq limit on a ve pump 12 valve?
New valve seals ?
@horsetorquesdiesel
6 ай бұрын
Nope these looked perfect! But definitely check them!
Does he have a insta?