Muy buen videos 👌

Why is that? that you had to replace the gears and the ECU I have my Impreza with p0016 only?

What's up guys, good video I recently got p0014. By chance do you know if this is related to that code?

Did that fix the P0018?

Is it the same for the fa20dit? Es lo mismo para el fa20dit?

Do you have do to the Cam gear replacement often on the motors? Should show how the R&R of the Cam gear itself

@dimitarchardakliev5351

3 жыл бұрын

Did you manage to fix it? I replaced one of the camshaft sprockets, all of the AVCS solenoids and a new timing chain kit. The issue is still present.

@Morphvalley_Reptiles

3 жыл бұрын

@@dimitarchardakliev5351 strange, I had a 0018 code, swaped my sensors out from left to right, same code so i replaced that side cam gear and it fixed the problem.

@dimitarchardakliev5351

3 жыл бұрын

@@Morphvalley_Reptiles That's the thing, the issue was gone for a month but now it's back..

@dimitarchardakliev5351

3 жыл бұрын

@@Morphvalley_Reptiles Did you replace the cam position sensor or the crank position sensor, or both?

@Morphvalley_Reptiles

3 жыл бұрын

@@dimitarchardakliev5351 avcs camgear/ time chain sprocket

Cuanto cobra por un trabajo como eso?

tengo el codigo p0016 que puedo hacer>?? los sensores sirven pero no se como arreglarlo

hola tengo un 15 subaru impreza codigo p0016 ,le cambiamos el timing actuator ,chain ,tensioner y guides. todavia el mismo codigo y el carro no tiene fuerza.q puede ser

@239dc5

2 жыл бұрын

la computadora tambien tiene que ser reempalzada porque tiene que aprender los nuevos timing values

Buanas Tardes Amigo. Mi BRZ 2015 tira el codigo P0016 el diagnostico dise Crankshaft/camshaft correlation sensor Bank 1 Sensor A. Hicimos pruebas de diagnostico resulta que los sensores estan bien. Tengo que cambiar el sprocket? Saludos desde Tijuana.BC

@djsonic_pr

2 ай бұрын

tengo el mismo prroblema . pudistes arreglarlo>?

I have a P0018 code as well, and replace the sensor but the light came back on.

@harshabandreddi2632

4 жыл бұрын

90each7no same bro, I replaced the sensor still came back

@90each7no

4 жыл бұрын

@@harshabandreddi2632 , my code came ON at 74,xxx miles. How about yours?

@ManuelXx8xX

3 жыл бұрын

Have you guys had any luck? I got the P0018 code at 55k miles on my 2013 Scion FRS

@90each7no

3 жыл бұрын

I got my code off already. Make sure that you use your car for what it is. If it's a sports car try to make sure that your inputs as a driver is to drive it as a sports car. I was at a point not pushing my car and that's when the code came on.

@ManuelXx8xX

3 жыл бұрын

That's good to hear. You're right I have never really pushed my FRS either. How did you get rid of the code?

Yo le cambie el motor a mi carro 2015 subaru Impreza fb20 y me sigue marcando crankshaft y camshaft position sensor A

@jaimegrullonsanchez7138

Жыл бұрын

en ese caso pueda ser la computadora ,talvez.

Hermano me puedes ayudar con un FB25 que estoy teniendo problemas

@izzyrodriguez8056

3 жыл бұрын

Cual es el problema

@brayanquesada3528

3 жыл бұрын

Tengo el código P0011 y P000A

@brayanquesada3528

3 жыл бұрын

P0011 SUBARU - Intake Camshaft Position Timing Over-Advanced Or System Performance Bank 1

@izzyrodriguez8056

3 жыл бұрын

Tienes q cambiar los intake sprockets, y si es brz tambien la ecu