Organize Your Office with 3D Printing
Ғылым және технология
Increase productivity and organization by transforming your office space with 3D printing! More 3D printing ideas 👉 www.ka3dp.com/3d-printing-ideas
Affiliate Links:
👉 Get this printer Creality CR-20 Pro amzn.to/38JZr6b
👉 Timelapse & remote monitoring camera Beagle V2 bit.ly/3roniWx
👉 10% off eSUN filament/resin, use code KA3DP bit.ly/3XJOlrE
Files:
Desk Cube www.thingiverse.com/thing:301...
Pin Box www.thingiverse.com/thing:367...
Webcam Cover cults3d.com/en/3d-model/gadge...
Card Holder cults3d.com/en/3d-model/tool/...
Headphone Rest www.myminifactory.com/object/...
USB/SD Card Holder cults3d.com/en/3d-model/home/...
Self Watering Planter www.thingiverse.com/thing:903411
Cable Holder www.thingiverse.com/thing:302...
Battery Dispenser www.thingiverse.com/thing:100...
Phone Speaker cults3d.com/en/3d-model/gadge...
📣 Follow Me 📣
Facebook: / kickass3dprints
Instagram: / kickass3dprints
Twitter: / kickass3dprints
Disclosure: Some links on this channel are referrals where I can earn commissions from sales
#3dprinting #3dprints #top10
Пікірлер: 288
Leave a comment with the top 10 list you want to see next!
@rikdenbreejen5230
4 жыл бұрын
Kickass 3D Prints I usually dont like top 10 lists, but the fact that you used a pewds video to lure me in deserves a like. Also a suggestion for a new top 10 might be top 10 anime battles, top 10 pewdiepie videos or top 10 3D printed computer mods. Btw i liked the top 10 it was better then most other top 10 channel lists. Kinda refreshing seeing a semi objective list
@Kickass3DPrints
4 жыл бұрын
@@rikdenbreejen5230 Thank you for kind feedback and suggestions :)
@neks4445
4 жыл бұрын
Top 10 minecraft ideas maybe?🤔
@karansena
4 жыл бұрын
Sell them people will buy
@MurderHoboRPG
4 жыл бұрын
Thunderhawk or storm talon
Someone should bring back the best of week collection on thingiverse.
@silverwarriorin348
3 жыл бұрын
Collections period
@adamarmstrong6234
3 жыл бұрын
Yep
Those are great ideas... my favorite is the golden cube thing, the pin dispenser, the battery dispenser, the laptop camera cover switch, the credit card holder, headphone holder, the wire clampers, the plant thing... and the phone holder!
I want a 3D printer that doesn’t even need a hot end like this! It just materializes the filament from thin air! 😉
@Kickass3DPrints
4 жыл бұрын
Magic ;)
@pilsecuritypilsecurity6689
4 жыл бұрын
You are not asking much are you ? kzread.info/dash/bejne/rJ6KrdGsnq6whso.html
@ReALliFe4nOw
4 жыл бұрын
I was thinking the same thing 😂😂
@bloodwolf2609
4 жыл бұрын
have a look at resin printers they don't use a hot nozzle and it looks like its just pulling a product out of a liquid. Alternatively, the point of the hot nozzle is to heat the thermoplastic PLA material so that it can be deformed into a different shape and then solidify when it is cooled. not having the heat would result in the material being brittle and impossible to shape or require a different material that wouldn't harden like play-dough.
@KaseyRelford
3 жыл бұрын
OCTOLAPSE
Me: *covers camera* The viruses on my laptop: Understandable, have a great day.
Watching things print is probably the most satisfying thing that ever happened to the world
I printed the battery box as one of my first creations. It turned out perfect. Great ideas here.
I want the hamster helmet!
@maveru-music
4 жыл бұрын
me too
@Zer0cul0
4 жыл бұрын
Cubone mask
@Remspamton
4 жыл бұрын
Meat u
@justamemer4712
3 жыл бұрын
Cubone Mask*
I see a couple of stocking stuffers in there...thanks for posting!
Awsome time-lapse. Nice items too.
Laptop camera cover switch - is PURE GENIUS!!!!! Huuuge thanks!!!!!
OMFG This is so incredible, and I have already my new 3d printer ready to use
Stackable battery dispenser was nice
Watched most of it at 1.5x speed and it was so satisfying watching the time lapse of the prints
Printing things from Thingiverse: The Series
@MitchellNewan
4 жыл бұрын
some people just aren't into CAD, a lot of people just want to print stuff. i see it a lot with the Cricut maker (die cut machine) where they pay to use all of the different card designs n stuff. I love to make, so i design for 3d printing and my die cut machine, saves me a lot of money tbh, but different strokes i guess. at least he credited his sources.
@zioxei
2 жыл бұрын
I don't know why someone who owns a 3D printer doesn't learn to make their own models for any specific use they might have. There's no point having a printer if you don't know how to make stuff with it.
I love the Videos how the Print is „growing“ greets from Germany 👍🏻
@birbthebird
4 жыл бұрын
Me too
Precioso ver el timelapse. Muy útil. Muchas gracias 😊
I'm not usually a fan of no-commentary videos. Some of these things blew me away though. Keep up the kick ass work!
Great video dude. Your editing work is amazing
This is great I seriously am going to be printing some of these!
Amazing. I loved all
2:30 you just taped down the left channel microphone on your laptop.....
am i the only one who feels like 3d printing makes me feel like god creating things out of thin air
@vincentgarcia6630
4 жыл бұрын
Brb, gonna go 3D print god Family guy version ofc
6:08 I'm glad I'm not the only one who waters their fake plants
Really awesome video!!!
I Will 3d print body armour for my cat!
These videos are so cool. I'd love to learn to make videos like this.
why does everyone have so many sd cards and stuff
@MaximilianonMars
4 жыл бұрын
It's an unfortunate part of using digital cameras and 3D printers, many SD cards.
@MrFoxracingred
4 жыл бұрын
I have ones for different occasions, like recording Christmas each year or vacation stuff then one I put all of our old VHS tapes to media and still editing. One that has movies for long car trips and a couple spares for the raspberry pi.
@Kanoshe
4 жыл бұрын
lol must use an iphone
@ameliabuns4058
4 жыл бұрын
@@Kanoshe wdym, me? i use a Samsung note, why would u say that
@vincentgarcia6630
4 жыл бұрын
@@Kanoshe ? IPhones have always lacked sd cards, and always will
Stunning video! Woot!
Really cool ideas 😉 I will try to upgrade them😅
Ok, the last one was nice.
@ShibaTheInu
3 жыл бұрын
So effective :)
Very satisfying to watch! What is the light blue material that you use for the phone holder/speaker and others?
You just made my pins today 😁
Идея классная! Спасибо
How did you time lapse the printing without showing the nozzle? 😅
@3dpro666
4 жыл бұрын
You can use Octoprint
@sheranlanger247
4 жыл бұрын
What's octoprint? 🤷🏾♀️
@WiseWik
4 жыл бұрын
Every layer the nozzle moves out of the way, triggers camera, comes back
@thsoup2353
3 жыл бұрын
Or the time lapse is so fast, you can’t see the nozzle. 😂
@griveouslegeneral9888
Жыл бұрын
@@sheranlanger247 it’s a raspberry pi system for 3d printers to control them through internet. You can connect a camera and make some timelapses
Nice effect with the time :)
The battery holders got me to hit subscribe
A fellow Aussie hey... Yeah... i spotted that Jaycar Nerd Perk card....
Great bro
Bohot hard Bhai Maza Aya dekh ke...
It is so relaxing
Them were brill lol
A lifehacks video but it's actual lifehacks.
imagine trying to grab a pin whilst getting stabbed
@parvezsoudagar
3 жыл бұрын
That is exactly what I thought when I saw it!!
Bonne vidéo avec des idées bien pratiques
How do you get your time lapses so nice and without Extruder n stuff in the way?
Amazing video, could you please let me know what gcode do you use for the timelapse, it would be really appreciated.
@nickrusso5058
2 жыл бұрын
Octoprint?
This is very good idea
If i may.. small tip. Instead of tearing doublesided tape just cut it. Causs where you tear it , it can ruin the glue layer and not stick properly. Have a sharp utility knife on hand or scissors.
Great video! what camera do you use for the time lapse?
@Kickass3DPrints
4 жыл бұрын
Canon 750D
Amazing👍
Nice and practical. Music please?
I was just watching for the timelapses!
this means only one thing:no more shopping..... And finally a great solution for plastic pollution!!!!!
I've always wondered how to shoot do Timelapses like this.
@NotLikeMe443
4 жыл бұрын
Octolapse
@roastbeefsnatch
3 жыл бұрын
G code stuff
@gladwintheawesome883
3 жыл бұрын
Simply put, you have a raspberry pi and octoprint to take pictures of the print every layer. The nozzle goes out of the way and the bed goes to the same place each picture. Each layer is one picture, so they add up.
@KaseyRelford
3 жыл бұрын
@@NotLikeMe443 +1
what kind of support are you using in the hole of the box of Battery Dispenser? thanks
Its like dispenser
Nice! Have you got the link to the cable organizer? TIA!
@Kickass3DPrints
4 жыл бұрын
Added. Took me a while to find it again!
Coucou Heliox j ai un souci je ne sais plus enregistrer avec fusion360 il me dis que je suis exprier je fais comment pour enregistrer????
Phone holdwr with sound amplifier was osm
That thumbnail... 😂😂😂
You can really take the blinding light mode for youtube? Now that's insane
2 sided tape. A 3d printers best friend
2:42 Her: you think your privacy is trash? ME: No; my cam is in the keyboard
Assuming PLA was used, how long will it last with potted plants?? Its biodegradable afterall
@Competitive_Antagonist
4 жыл бұрын
It will apparently take many years to decompose in compost unless at high heat. kzread.info/dash/bejne/g2Rmustwg5i2hLA.html
Can you please post a link to the blue filament you used in the planter? I like that color.
@Kickass3DPrints
4 жыл бұрын
That roll is pla from eSUN
Does this stuff also work on a resin 3d printer?
Awesome prints! Can you please share your slicer profile? Thanks.
@ShibaTheInu
3 жыл бұрын
Would be interessted as well :)
super Ideen
The phone stand looks like a screaming alien
You got a like just for the pew die pie pic in the thumb nail
I’m not into 3D yet but I’m thinking about it. I’m a a Type II diabetic, is it possible to make a series of boxes that link together in a RIGID way to hold my meter, test strips, etc?
@griveouslegeneral9888
Жыл бұрын
Maby the HEX storage system, wich have some sliding rails to connect to another container. You can extend them easily with the slicer to aadapt to the size of your equipment
I literally have a stack of old gift cards and shit right next to my printer that I've been moving around trying to figure where to put. thanks!!
Excuse me, how do you do these time lapse of 3D printing? for only view the model increasing
@gustavo69er
4 жыл бұрын
I dont do this myself, but as I understand it between each layer you have the nozzle return to some point (preferably out of frame) like (0,0,0) and take one snapshot per layer, that way it prints the layer, moves out, takes the shot, prints another layer, and so on. That's how you get the cool effect of the model "growing"
@ancelrick5396
4 жыл бұрын
It's feature of a software called "Octoprint" It runs on a Raspberry Pi and provides 3d printer Job control, network access and other functions. The time lapse feature It works basically like Roberto says
@griveouslegeneral9888
Жыл бұрын
@@ancelrick5396 now, there is the « beagle » camera which is easier of use
How did you do, this Timelaps? That looks very nice
@ShibaTheInu
3 жыл бұрын
I think he uses many single pictures :)
@griveouslegeneral9888
Жыл бұрын
@@ShibaTheInu or octoprint
This afternoon, I was really frustrated with the quality of my prints. After seeing your video, I feel much better. Thank you.
Laptop camera cover was the best for online class😂
дякую! 👍
How did you guys film the timelapses? I'm interested in doing that myself.
@Kickass3DPrints
4 жыл бұрын
I use Octolapse
Did anyone test the smartphone speaker? Is it any good...?
Kindly suggest how to 3D print a mobile handset
Does anyone feel like this has a stop motion vibe? Besides the time lapse
Why would you water plastic plants?
the clear under extrusion in some of these prints is fucking killing me
9:51 Winds Of Spring
why does that headphone thing look like the text from Thingiverse :)
just little side note: PLA with exposed water will become brittle after a while. so use PETG or ABS.
Milwaukee drill 😎😄
2:30 My lenovo laptop has that feature
Hi! I want to start with 3d printing. Wich 3d printer do you recommend? What is your printer?
@Kickass3DPrints
4 жыл бұрын
This was printed on Creality CR-20. They also make the Ender 3 which is another popular model which is a good price for first printer. Link for that is in description :)
@SebastianRamirezH
4 жыл бұрын
@@Kickass3DPrints thank you so much! For example with the Ender 3 is it possible to build the same artifacts that you made in this video?
@Kickass3DPrints
4 жыл бұрын
@@SebastianRamirezH yes you can
The phone speaker's link is incorrect.
@Kickass3DPrints
4 жыл бұрын
FIxed cults3d.com/en/3d-model/gadget/groovi-monster
His next video: I 3D printed a house!
For the pin holder add a lid because my office is now at home i don't want some of my kids or guests to touch them
where do I get the stl files
Staples really dislikes this video
0:26 just an uncapped exacto knife lol
What was the song?
Not even considering print orientation :D was really wondering why he didn't print the letters of the battery boxes standing upright while he was on it. These parts were designed to not need any supports
@samhilger5761
4 жыл бұрын
They were glued on is that what you mean
@mschild95
4 жыл бұрын
@@samhilger5761 no. The boxes should be printed on their face which removes any need for supports
This man rlly spent three days printing a bucket with a tube on the side
Why cover the laptop camera?