One note here is that you should put a featherboard only before your saw blade, so it won't pinch your cut.

@marchingknight11

Жыл бұрын

Yes!!! The placement of your feather board here is extremely dangerous and likely to cause kickback

@martinsvensson6884

Жыл бұрын

@@marchingknight11 Not going to create a kickback in this video since nothing is beyond the center of the blade. Its not going to kickback on the blade side pushing down against the surface. At least not when you have a riving knife also. The thin strip can kickback though. For other reasons. Since nothing is pushing it down.

@shadman3000

Жыл бұрын

Definitely a strong potential for kickback on the thin unsupported piece of wood between the blade and fence, regardless of where the feather board is. There are jigs that help with cutting thin strips. There might even be a 3d printable version. Rockler makes one and it looks pretty easy to recreate in CAD.

@briankale5977

Жыл бұрын

Yep, exactly how he has it in the video. Before the center of the blade.

@daylen577

Жыл бұрын

You also push between the blade and the fence, off-cut should go on the left side of the blade (assuming fence on the right)

Michael, I echo your thanks to all of those designers who work so hard on creating a model and then releasing it to the public for free. THANK YOU to all those designers, I/we really appreciate your efforts.

I'm so glad you found my mantis clamp worth including in your list :D Your right that the stand part of the clamp is a real tough problem to solve.

Thank You for this‼️ Appreciated 🥰 And Big Thanks to the generous designers as well 🙏🥰

Been binging your vids all night. Love your channel man. Your expertise is oh so appreciated in the community

So timely. I have a project I'm getting ready to build and the radius gauges are perfect. Thanks

that last part should have been the first in the video. i'm always amazed and gratefull at some of these tools released for free. Amazing comunity

Love the video. I'll print a few of those. For future reference, you can use the pokey part than comes out from the end of your calipers to measure depth, like you needed in your lock-blocker project.

The drill dust guide is good and durable enough to keep in your drill case or bag, but a cheap option is to use an envelope taped to the wall with painters tape or a folded piece of paper. Works great!

@adamcallaway3762

Жыл бұрын

Always found a simple sticky note the best and easiest option you also throw it out with the dust it’s collected

@madderall_dot_com

Жыл бұрын

But, But, But, But... it's not 3d printed! Seriously though, that tool seems like an over-engineered solution without any additional benefits. I actually know of something similar that comes with a vacuum hose attachment for a portable shop vac. Otherwise a piece of foil and painters tape make way more sense considering you may want to have both hands on a hammer drill.

@jm329

Ай бұрын

@@adamcallaway3762Seems wasteful.

Thank you for doing all the hard work of selecting some really useful things out of the ocean offerings

There are definitely some useful models there, I use the soldering jig all the time. I love how it lets you hold thick wires and thin resistor leads equally well. I use a thin watery flux, and I'll often place a few drops in the middle of the jig so that I can flux my wire/component and solder away, and keep the mess off the benchtop. My fractal bench dogs (you mentioned my design in your vise video) have been more for novelty than anything else. I just don't find myself needing to clamp irregular objects all that often, or, at least not where 3 points won't do just as well as fractal jaws for holding power. The mechanism is really cool looking though.

Fantastic tools indeed, Michael! Thanks! 😃 Stay safe there with your family! 🖖😊

Hey Michael, love your work! That alternative version of the helping hands would be great with some Velcro command strips on the back too. Easily removable from your work bench when not needed but holds in place nicely when have to do a lot of repeat soldering

@haqeeqee

Жыл бұрын

Oh that's a really good idea!

Amazing tools in this one! Will print several of those!

Wow I am so honored to be featured in this video (the wood push stick) I literally learned everything I know about Marlin and firmware modifications from you !

The more videos I watch on 3D printing the more I am blown away by what can be done, truly the imagination is the most limiting factor. I must invest in one soon. Thanks for the videos.

@wematanye533

Жыл бұрын

I just have a budget one and honestly it has been fantastic.

@Grimmwoldds

Жыл бұрын

@@wematanye533 "budget" is about a billion times better than where 3d printers were a decade ago. Honestly, the only major issue with budget printers(modern, not the ender 3) is you're largely incapable of anything requiring good heat deflection.

@denis2381

2 ай бұрын

Me too. I have a 10 year old printer doing great prints (turnigy fabrikator) even with 150mm/sec. I bought it last month for 10€ lol i also uploaded a short video of it printing. Its only limited by small print surface​ and volume 150x150x100@@wematanye533 some days ago I bought geetech a10t for 30€ because seller thought it is broken because it didn't home anymore since he replaced Mainboard. He didn't flash the Mainboard with marlin activated bl touch. I configured bltouch in firmware, flashed it and now it works perfectly lol amazing deal

Excellent collection. I see a few future shop projects.

Great finds Thanks for sharing your expirence with all of us:-)

Thank you so much for your extremely kind review of my vise! Seeing this on your channel totally made my day! 🙏

12:52 No. No no. Never rip a thin piece between the fence and the blade. That thin piece is what gets kicked back and the featherboard isn't touching it so it can do nothing to stop it. Put the large part against the fence with the thin offcut on the outside. You may need to make a thin rip first to true up that edge to parallel to the edge against the fence. If you need to repeat thin strips, Print a thin rip jig. There look to be some good ones. (I haven't gotten to them yet but are on my shortlist) 👍

@critter42

Жыл бұрын

So cringe when he says "...to safely push the plank through" while doing it probably in the most UNSAFE way possible save for doing it bare handed maybe...

@Hudston

Жыл бұрын

Came here to say this. I'm honestly surprised that piece didn't end up putting a hole in the wall, especially with how it was creeping back towards the blade at the end of the clip. I don't want to come off like the safety police but I'd seriously suggest replacing or removing that segment. Because this is a channel full of tutorials and advice, it's not unlikely that someone might copy what they see here and end up seriously hurt.

@baldeagle5297

Жыл бұрын

I use a sacrificial push stick to hold both pieces in place with a board slightly wider than the cut-off clamped to the fence. I've done it this way for forty years and never had a problem.

@Tensquaremetreworkshop

Жыл бұрын

Thin rips are done thousands of times a day across the world. Yes, a push stick on the thin part is advised- but what force, given there is a riving knife in place, do you think there is to propel the part backwards? Vibration causes the part to jiggle against the blade, but there is little transverse force involved, so little rearward force can be generated. Tests show that the part moves backwards very slowly, as can be seen in this video. So, yes, it should be supported but the risk level is low to very low, because of the combination of little chance and low consequences. There are many more risky events captured on YT- and in this video where was the crown guard? A much more serious omission.

@queenwithapeen

Жыл бұрын

@@critter42 Im a wood worker. You should never use gloves when using a motorised saw. Its a recipe to get your hand caught and loosing more than just a finger

3:34 - Turn the calipers around - there is a stick that pops out the back when you use the calipers that lets you measure things like that (as well as the depth of tiny holes, for instance.) You probably already knew that though, and this was just a use-case example for your print 😇

@HebrewHunter101

11 ай бұрын

Dude what. I never realized. Been using my calipers for 4 years. Only just discovered the use of that little leg. Thank you!!!

@satibel

10 ай бұрын

​@@HebrewHunter101also if you have digital calipers you can measure travel distance by extending it, zeroing the calipers, pushing the button and checking the value (you can also do it the other way around, the difference between the two is if the distance is shown negative or positive) Another nice trick is the distance between center of holes of the same diameter, use the back to measure the hole size, zero, then still with the back, measure the long distance, it will give you the distance between centers.

@evilren1981

8 ай бұрын

The same thing applies to the table saw height tool...your calipers are sufficient if you know how to use them.

@X3347-

8 ай бұрын

Idk if there are reliable becuase of the perpendicularity of the hole and calipers but you can get a depth caliper that’s much more reliable

@nutsumm

6 ай бұрын

aahahahahahaha )) why you tell'em this secret knowledge

Another great video, Thanks! A tip on collecting dust from drilling into a wall. A mailing envelope and a piece of painters tape.

That bit and blade bridge looks very handy!

some seriously intelligent solutions presented here. just started with 3d printing and just realized that only the imagination is the limit.

Thank you, i have been searching for a similar video for a long time, finally i find it🎉

Owning a 3d printer is like owning a lathe. You use it to make more tools for it!

@dev-debug

Жыл бұрын

Been there done that and for a cnc mill lol

@ADR69

Жыл бұрын

oh man. i want a lathe so bad.

@dgodrummer8110

Жыл бұрын

@@dev-debug CNC router?

@weisnowhere

Жыл бұрын

Wood lathe or metal lathe, Just got a wood lathe and interested making tools XD

@sticky_ricebowl

Жыл бұрын

I literally used a 3d printer to make a cnc to make attachments for other tools....also gonna use that cnc to make another sturdier cnc

The cable soldering jig is genius.

3D printing is a unique technology, I really enjoy it

Nice video, thank you for sharing.

great vid, stopped it halfway to start the print for the mantis clamp, that's too cool!

Hey michael, I originally got a 3d printer to supplement my woodworking/luthier template needs, this video showcases a lot of the stuff I love. The dust collection accessories scale and woodworking tool/accessory costs go out of control without a printer.

Awesome collection, there's a couple of tools I will be printing, also, there is a few nice hole dust collector tools for older Dyson battery vacs, these are brilliant as well.

It was the best I've ever seen. I wait for more

This is what I enjoy the most with my 3D printer. Item that help in every day life. I saw a few I’m gonna get crackin on. Cheers

Great video! Extra points for the McLaren shirt👍🏼

This is the first time I have seen a three d printer in action. I must say they are very versatile and your imagination is your only limit.

Really helpful, thanks.

Thanks for sharing some of these great ideas. Just a tip on the use of the feather board. Never place it opposite the blade. The feather board should be positioned just in front of the blade so you are not pushing the workpeice into the side of the blade. If you do it will jamb and kickback at you. Dangerous.

I have that wire soldering jig, my old helping hands have not seen the light of day since I printed it. I like that vise built like a scroll chuck, think I'll do one of them next.

Great specific video!

Good work! This helped me.

Great vid, thx mate!

Thanks for these tools!

reminded of the cable clamps i made for my housemate to run network cable to the bedrooms of his house (didn't want to drill holes in walls) so i made them clamp to doorways and walls to keep the cables out the way

excellent video. great models!

Fractal Vice amazing idea. I did not know about something like that.

Great video as usual, thanks

I'm currently printing the 4 jaw version of that vice, found it last night while looking at tool collections on printable. I was going to do the 3 jaw version later.

great as always

oh that fractal vice is genius, that might actually be the most useful tool in this video

Great Video! thank you!

Another great video! 👍

Ty so much for the mention in your video!! I was pleasantly surprised to find out one of my desings made it to one of your videos!! thanks!! (I'm Bearlord on printables).

Bonus 13th item was worth it!

Seems like the cable soldering jig still has the core issue: the copper strands are hard to keep 100% parallel, they angle away a bit. My fave tool for this is a metal oval, made of two "clampable" horizontal layers. The wires go in-between the layers. The hole in the center is small and fixes the strands as you want them.

@TrevorV

Жыл бұрын

I can't picture what you are referring to "metal oval". Do you happen to have a link?

@contrarian8870

Жыл бұрын

@@TrevorV Imagine (clampable) metal tweezers. On each end is a flat loop (~1/2" sq) with a hole in it. You can clamp two cables, so their exposed strands meet within the hole, where you can solder them. Search for "Splice-It-Easy Soldering Tweezer"

@slimjim7411

11 ай бұрын

Reality to solder both ends should be splayed then put together and twisted. Then the connection should be soldered. Just sitting 2 braided wires next to each other and connecting them with solder is definitely not the proper way. If you do it properly then the wires stay together and the stand can hold them for easier soldering.

@oldkingcrow777

7 ай бұрын

​@@slimjim7411this. Even just twisting them is leagues better than a butt splice lol

Great to see that Oscar Piastri Merch! Awesome channel, awesome video, awesome taste in F1 merch :)

Awesome. These will be good for out Makerspace!

At .075 watching speed is wonderful. So normal!!! At my 64 years old my brain works at that speed besides I am a spanish language native. Thanks from Colombia, very helpful.

thank you!

I recommend the old western union knot when soldering two ends of wires together.

5:20 That's one of the first things I ever printed when I got my first printer about 4 years ago. I still use that same print all the time.

Awesome!

just a quick note.. on the table saw, you should have the main body of the board next to the fence, cutting off the small part on the other side of the blade. this is because the thin piece can bow (and often does in natural wood) causing it to press against the blade and then shoot out back at the operator. note for the future. ;-)

@Lessenjr

11 ай бұрын

Bump for an informative post. The off cut should never be between the blade and the fence. Very dangerous. This does however inspire the design of a 3d printed thin rip jig.

Very cool 😁👍

good vid; the soldering jig has been on my short list for a while. one comment though; if you're seriously considering the corner clamps, have a look at Izzy Swan's corner jig first; it's wooden so no concerns with rigidity, easy to make, and they use wedges so no need for the bar clamps.

excellent video

On your caliper, you know the little stick that extends out on the furthest end from the 'jaws'? You can use that to find out the depth of holes, also the height of a step. In combination with the zero function, you can have it read, for example, the height difference between a knob that is pulled out or pushed in...

EXCELENTE CANAL, VALEU...

thx !

Just discovered that the bit and blade bridge is decent as a scalp massager

There's a drywall dust catcher that screws onto a standard sized empty water bottle. That's my goto for dusty drywall drilling.

Dam, these are all pretty handy ngl

Instead of having stepped measuring insets (5mm, 10mm, etc) for marking along the edge of the board, create a wedge shape that lies flat on the board (like the stepped insets do, but make a ruler that slopes backward with the wedge (the rule dimensions would have to be stretched to make up for the angle) - run some small teeth down the front edge to lock the pencil tip. This way, you can mark in millimetres/1/16" increments. I need to get a printer...

hahaaah you actually got the Piastry shirt like you said 12 days ago! Looks great!

Bromo, you've got a Ryobi One+ Soldering Station and One+ Hammer Drill, just get the One+ pin nailer for those wooden drawer inserts. You've also got some One+ LED light! Also, use a cheap chip brush to push the splinters, don't use your hands.

Lol I'm no wood fairy, but the way he used his table saw had me rolling.

It seems as tho the 3D printing community is one of the most generous and open communities out there... I really need to invest in a 3D printer...lol

I only use helping hands to hold boards, for wires I just use my fingers much like the way that jig works, but that jig seems like a good investment. I'll print one up right away mefinks.

I’m excited about the gauges and guides! That fractal vise would be really cool in metal, come to think of it, most of these would.

@evanbarnes9984

Жыл бұрын

The original fractal vise is made of metal! This is a 3D printed replica. Such a clever tool.

After I switched from Simplify3D to SuperSlicer at your suggestion, it happened that development stopped there too. There has been no new version for almost half a year. In the meantime, both Cura and Prusaslicer came out with the new organic support and a bunch of new features.

@1fareast14

Жыл бұрын

I'm in a similar spot, if ss doesn't get updated in a few months, I'll just go to prusaslicer

#1: It's cute. But, you can use your calipers to scribe a line. Or, use a speed square.

That radius gauge is potentially very deceptive. Most corners in contemporary industrial design are not radiused (G1 continuity) but rather have at least G2 continuity, if not G3 or G4. The actual change in curvature begins much further back than you'd guess at a glance, and the corner is not actually circular. The reason is so that reflections gracefully flow around the corner instead of abruptly forming a sharp line. But it does mean that if you assume it's a radius, you're going to have gaps in anything you model.

@samk2407

2 ай бұрын

I've definitely noticed that, is there a better type of tool for measuring that type of flowing curvature or not really?

awesome

Feather board should not be printed out of such flexible material. The ones you buy are much stiffer. They flex a very small angle. This helps them hold the work piece tighter to the fence and also perform their function as an anti-kickback device better. This is a great video, I am surprised how good the printed vices / clamps work, very cool.

Great tools. The table saw looks like my Evolution Rage 5S 😉 Doe you have printed some additions or Tweaks for it, beside the shown? Mine has not the kill switch cover. Doesn't found an one that's fits nicely. Also the rest of your tools looks like in my workshop. 😂 The Ryobi cordless drill hammer.... It could be filmed in my workshop. 😂

The corner clamps - his example looks pretty low stress. I have the steel as well as the Woodpeckers aluminum. Are the 3d printed strong enough to keep a full size assembly (like a kitchen cabinet) square?

gotta love the Oscar Piastri shirt

I would suggest gluing aluminum foil to the bottom of the cable holder so the molten solder doesn't melt through. Good video overall

I want to try the last tool. I work on old model trains. Many times the bodies require repair inside for mounting bosses mostly. But to hold them upside down the steam engine shapes are irregular and hard to clamp but any means. I need to dremel cut away the damage. Vacuum tube?? then define the repair part needed, Radius gauge and screw gauge ?? then I 3D Print the repair part and glue or screw in place after a test fit. I think that larger flexible clamp would be great with some TPU jaws on top. Is that possible???? Dennis

The wood whisper has an article called "Cutting Thin Strips at the Table Saw" which covers various options for doing these cuts safely.

surprised you haven't made a 0 clearance insert for the table saw. Really nice for doing thin parts.

The Power tool section is pure perfection. I will print all of them. Michael: Curious what your thoughts are on the best value printers out there. A bambo carbon looks intriguing but its 900 USD. I have a bunch of creality printers but I'm looking to take a step up.

Video out of synch if you didn’t know already. Loved the tool choices!!

Hi; I subscribe and watch your channel because you 3d print and CNC showing your processes. I enjoyed your 3d printed tools video but was wondering if you have any CNC tools that you've designed and printed? I have a proverxl 4030 enlarged to 1010. I've found a few mods but no real tools to assist with machining Thank you Derek

13:38, the off cut are getting push back by the table saw blade, would be safe to off the machine to prevent kick back.

it is not advisable to do a cut as demonstrated around the 13 minute mark. if there is not enough room for a push stick between the fence and the blade you should use a spacer block of wood between the fence and the workpiece to keep the workpiece from being pinched between the fence and the blade. The blade can throw the arrow sized piece of wood back at you with dangerous speed.

Once you start crimping cables together with the right crimps and tooling you will never go back to soldering

There is a printable cable holder for soldering in 3 parts that use an elastic band to tension the grip. Much better version.

5:30 I wonder if you might benefit from printing an adapter to somehow mount the cable soldering jig to your solder station itself so it doesn't bump around as easily.

If u have to solder 2 wires on to each other.. please don't twist them up and glue them thogether with tin. Strip both ends of wire an equal length. Now push the wires in to each other and solder this up. It's a much better connection from both an mechanical and electrical point of view!