OMPHobby ZMO PRO VTOL: Adding a radio and FPV gear (SBUS, CRSF, DJI etc.)
www.scotiarc.co.uk/
www.omphobby.com/OMPHOBBY-ZMO...
Time codes:
0:00 Intro
2:53 Where all the settings are in Mission Planner
3:57 Default channel order for the radio control
5:14 Some key setup choices on this model
7:31 SBUS
8:23 CRSF
10:03 MAVLINK
10:39 DJI
11:32 Analogue FPV
12:08 DJI v2 and Walksnail
12:26 A warning about the OSD tab in Mission Planner
13:37 Summary
Sadly I am unable to show flying footage as mine failed to transition to forward flight during the maiden and smashed into the ground nose first.
Thank you for taking the time to watch the video. You can find me on social media at / painless360
/ painless360
www.thingiverse.com/painless360
R/C is one of my hobbies and I do this for fun. I don't do this to replace a day job so if you have found the content useful then and want to support the time I spend helping others and creating content then please consider liking the video and subscribing. It helps a lot!
If this video helped you and you want to support the channel you can use these links:
/ painless360
paypal.me/painless360.
Remember that reviews are subjective. Don't rely on one persons opinion - watch reviews and make your own mind up. Where-ever you can support your local R.C resellers and shops, they need your support more than ever.
If you liked this you can see more R/C related videos on the channel - / painless360 , use the playlists to find entire series on topics you might find interesting.
Be aware that any comments that are rude, disrespectful or use bullying or threatening language will be deleted. Pedantry isn't encouraged either. This channel is all about helping others and passing on advice and ideas so please comment in that spirit. Comments that don't adhere to these simple rules will be deleted.
Thanks again for watching, support each other and the hobby as we have enough external drama without making more for ourselves.
LIKE and SUBSCRIBE and above all - Happy Flying!
#drone #painless360 #review
Пікірлер: 36
Fantastic, Lee! Thanks for the tutorial! 😃 That's a fantastic model indeed! Looking forward to the flight video! Stay safe there with your family! 🖖😊
WoW ! I can't wait to see it flying. Thanks again for the information
Thank you so much for the video. This is very helpful in setting up the VTOL with TBS Crossfire and the DJI O3 Air unit.
Really useful video. Thanks for making this
I like your videos a lot bc I'm looking at getting one of these. Looks like a nice setup and I'm not a big drone pilot. I just like this model and your videos.
Wish I had this video guide when I was setting up my ZMO Pro 2 months ago 😭😭😭
@Painless360
Жыл бұрын
Thanks for the comment. I'm pleased that they added this detail to the manual. The first version left a lot of key information out... Happy flying
@carloscarosolis5660
10 ай бұрын
Hello, I can't find the latest parameters,I will appreciate if you please indicate me where are they, there is a update firmware in omp webpage but is a .apj FIL. Thanks for your help
Hi Lee, Steve here it’s been a little while still watching all of your videos. They’re always so good Lee I got a couple questions if you don’t mind one is going to be about the. Heewing t1 vtol, when mounting the GPS ( matek m8Q 5883 ) does the arrow need to be pointing in the same direction as the flight controller? ( matek f405 vtol ). In my case, I mounted the flight controller the same way you did, and just reversed it in mission planner but if I’m not mistaken, I think you might have the GPS facing the same direction as. Fc, second question in regards to.ZMO pro. And what was your final outcome as far as installing the pitot tube I think the last video I saw of you with this boy she was going to go back to the original set up that they provide and try that I was told it works if there’s no wind at all I was just wondering what your thoughts were on that and what did you end up doing with yours? Thanks so much Steve and continue. Looking forward to watching more of your videos. Believe me they’re so helpful. Thanks again Steve.
@Painless360
Жыл бұрын
In the software you can tell it you've rotated the FC and Compass. If you install the FC rotated, I'd still install the compass the right way. One less thing to fix in the software... Happy flying
@stevebilogan6249
Жыл бұрын
@@Painless360 thanks Lee that’s what we’ll do
Could someone please link the updated manual. My ZMO Pro did not come with any manual at all.
How do I setup DJI 03 air unit with the remote controller 2?
@Painless360
Жыл бұрын
I don't have one here to try. Best of luck
@iCatch
Жыл бұрын
I have both O3 and RC2, but my current setup is to use O3 only for FPV and another ELRS receiver/transmitter for control. I will check how to use DJI O3/RC for control and let you know.
@Painless360
Жыл бұрын
They released a firmware update on the 21st April that addressed that. I'm trying to find out where they posted it so I can share a link..
@dkieng
Жыл бұрын
Just make sure you upgrade the DJI O3 air unit and the DJI remote controller 2 to the latest firmware then you can bind both the controller and the goggles 2 to the O3 HD system.
Wow, great video Lee 😊. Is there already a firmware update around?
@Painless360
Жыл бұрын
See my post on the community page from yesterday. I have it here, not sure how public it is yet..
@willay747
Жыл бұрын
@@Painless360 they did post on Facebook. Will you do video on how to update it? Im not good at ardupilot
@Painless360
Жыл бұрын
IDone, Check the playlist... best of luck
@maro0016
Жыл бұрын
@@Painless360 That’s good news 😊. I’ll wait till you finished testing with the maiden of mine (arrival is scheduled for mid of May)
Could you possibly add a link to the reference guide? I have been able to find only the quick start guide which is no help at all. Thank you for all you do for the hobby!
@Painless360
Жыл бұрын
www.dropbox.com/sh/nh2hqzrqbbdznqs/AACzfrecOKr_Ow_YWELThkcLa s what I have here. Not sure why this details isn't on their website..
@icemanf6417
Жыл бұрын
@@Painless360 Thank you so much. I wondered the same thing myself.
@bartonfink5051
Жыл бұрын
@@icemanf6417 Had the same question. Where did you source the QR PDF Guide from Painless? Thanks for posting it up.
Cool, do you have a video of it flying?
@Painless360
10 ай бұрын
Mine crashed on first flight due to a servo failing. Still trying to get it airworthy again..
@gr8motive
10 ай бұрын
@@Painless360 ah, bummer. Omp didnt get you a new one for this?
@Painless360
10 ай бұрын
We've been trying to repair it... Stay tuned
I wish I could fly this with DJI PRO controller. Do you guys think it is possible?
@Painless360
Жыл бұрын
I'd think so, if you have an Air Unit in the model it'll bind to... Happy flying
where is the flying video? (Great video series by the way)
@Painless360
3 ай бұрын
See note in description... Happy flying
@neiloakey5183
3 ай бұрын
@@Painless360 omg... After all that work too..
@Painless360
3 ай бұрын
Yep. Gutted.