Oil Pressure Sensor replacement 2013 Cadillac Escalade
Автокөліктер мен көлік құралдары
I replaced a oil pressure sensor in a 2013 Cadillac Escalade AWD Premium. By the book the whole intake is supposed to be removed to do this job but I found a way to do it without removing the intake.
The Link to how to remove the sensor plug • Oil Pressure Sensor W...
link is super helpful because if you do this job like I did you will have to unplug the sensor blind.
Пікірлер: 28
Thank you so much for your video. I could have not done it without your video & another. Thanks for the link in the description to how to take the electrical connection off. I would have never figured that out without that video. Your socket size did not seem to work for me, it seemed too small. I don't know, maybe I pulled the wrong socket out. I did find that Harbor Freights 1/2" 27mm deep wall socket for $4.99 was nice and snug, it worked perfectly. Thanks again.
Just did this today without removing ANYTHING AT ALL except the pigtail and the sensor itself!!! No hoes or lines removed AT ALL! Its possible guys just take your time! And I have big hands!💯💯💯👍🏽
@orangecrush50
7 ай бұрын
I have to replace that on my Cadillac as well. I'm not looking forward to it
Thank you your video is the best one! I had a hell of a time getting that clip off and your video is the only one I found that addressed that exact issue.
You don't have to unhook the full line. The pcv valve tube only. I changed mine in my 2010 gmc sierra 5.3 in 30 mins. You can also use just a 6 inch extender
What part number did you get the replacement I got from Autozone AC Delco is a flat plug not oval. Mine also did not come with a filter either.
Good stuff thanks
The filter definitely came out of mine and the new one went in perfect as well. So I'm not sure where you're getting your info.
@cj8172
11 ай бұрын
Aparently it's just the automatics that use that filter and not the manual cars.
Excuse me, how do u check the oil psi
Hey what did where is it at on my SRX 2012
What tools did you use im having this problem.
@johndurante2322
Жыл бұрын
Use a 1/16 inc deep socket tool you can buy at any auto store. 6 inch extension any wrench a pick for the screen or a long bolt like he used. I used a hanger wire.
How do you get the clip off????? 0:09
Did this problem come back or is it still going strong ?
@davidybarra4095
4 ай бұрын
I've never had the problem come back
The filters for the 5.3 engine not the 6.2
Mine didn’t had oil but was bad
I just did this after a couple days of fighting with the clip, even fully understanding the clip it was still a pain to unplug. I left the fuel line on but removed one of the plastic lines and was able to access it easier. It was a b*tch but better than paying a mechanic $400
@extrememiami
6 ай бұрын
OMG whyyy didn't ypu mention how you ended up getting that clip off 😢 I can't do it. 4 hours now!
@user-sn4rf9xy5p
4 ай бұрын
How do you remove the clip ????
@davidybarra4095
4 ай бұрын
Click the link in the description. It goes to another video that will help you
How do you get the clip off?????
@davidybarra4095
4 ай бұрын
Look at the link in the description for another video that helps you know how to undo the clip
Where exactly is the filter I can feel anything men
@davidybarra4095
Жыл бұрын
Apparently some vehicles have the filter and some don't. I'm not sure which will have it and which won't but mine had a filter underneath the oil sender/sensor. Once the sensor is removed you can stick your finger in the hole the sensor came out of and you can feel the plastic tips of the filter if you have one. Perhaps try using a mirror and a flash light and look down the hole the sensor came out of and then you should be able to see if you have a filter or not.
Why are you breathing so heavy?
@JohnB-lj7cd
6 ай бұрын
Because this job sucks!