Escalade oil press

Пікірлер: 26

  • @mrdeanv4414
    @mrdeanv44143 жыл бұрын

    Thank you very much....! I have 07 Ext Escalade with the same problem...

  • @gezay5924
    @gezay5924 Жыл бұрын

    Man you hitting every curb

  • @HotPocketMcFarlane
    @HotPocketMcFarlane5 жыл бұрын

    How do you feel about fuel pump replacements? Running that sweet Caddy Escalade pretty low my dude.

  • @utfan26
    @utfan263 жыл бұрын

    Most common issue that I have encountered is the oil pressure sensor

  • @juanbustos4494
    @juanbustos44946 жыл бұрын

    Had a similar problem and i changed the mass air flow sensor and it worked perfectly for me

  • @richardmurphy2827

    @richardmurphy2827

    6 жыл бұрын

    Doubt it. MAF sensor has nothing to do with oil pressure. Nothing.

  • @betosanchez2494

    @betosanchez2494

    4 жыл бұрын

    Im having the same problem as well with my escalade i was told by somedy else the same thing about the mass air flow sensor.. your was showing the oil pressure low as well????

  • @pigman571

    @pigman571

    2 жыл бұрын

    My fuel pump woul shit off randomly in my 2016. Turned out it was a short in the guage cluster. It 200% could be a short somewhere in your electrical system. The Mass airflow s would be your problem. Only way to know is unfortunately to take hours testing the whole system

  • @supermunkey84
    @supermunkey845 жыл бұрын

    What about the stability traction control light?

  • @deez6686
    @deez66863 жыл бұрын

    What did u fix on that problem sir

  • @jjuan3jir
    @jjuan3jir2 жыл бұрын

    Disculpa. Cual fue el problema. Que iso para solusionarlo?

  • @amoz1
    @amoz17 жыл бұрын

    I'm having exact problem do you know what the problem was thanks

  • @richardmurphy5329

    @richardmurphy5329

    7 жыл бұрын

    Yes. See problem solution below. You're going to have to pull that oil pressure sensor as soon as possible. If you let it go until you start hearing engine rattle, you can kiss your engine goodbye.

  • @TEXAZPITBULL

    @TEXAZPITBULL

    7 жыл бұрын

    Richard Murphy so is it the oil pressure sensor or the pump

  • @dmxmike2

    @dmxmike2

    7 жыл бұрын

    TEXAZPITBULL it's the pump. I just done my o8 it's not hard just time Consumin only Special tool needed is a pulley puller witch you can rent don't even have to drain the oil. new pump and timing gasket set hardest thing is the oil sump bolt.

  • @illustr8phee100

    @illustr8phee100

    3 жыл бұрын

    dmxmike2 hey mine oil lights came on few mins after running.. stick has oil..says 67%.. can my pump be going or sensor??

  • @jesusvalentin9635

    @jesusvalentin9635

    3 жыл бұрын

    dmxmike2 hi I know this is old but, was the gasket from the oil pick up tube to the pump broken or, cracked?

  • @liljoker619sd
    @liljoker619sd8 жыл бұрын

    did you find out what was it cuz my escalade is doing the same thing

  • @richardmurphy6446

    @richardmurphy6446

    8 жыл бұрын

    +carlos maldonado Yes, it turned out to really be low oil pressure. I had to replace my engine. $8,500. The oil pressure relief valve is a non-return spring system on the front of your cam. If the truck sits for months at a time, this area gets sludgy, builds up sludge and blockage back to the #1 cam journal, which then kills the #1 lifter valley and destroys the block. Unrepairable, have to have an entire new engine not just a rebuild.

  • @jesusvalentin9635

    @jesusvalentin9635

    3 жыл бұрын

    Hmmm I’m sure you used conventional on something that uses Mobil 1 synthetic or, equivalent.

  • @lpz3665
    @lpz36652 жыл бұрын

    Toasted cam bearings

  • @heavyhemi390
    @heavyhemi3907 жыл бұрын

    every oil change sub a quart with marvel mystery oil.. evrytime you drain your oil its gona come out dark.. thats marvel cleaning and lubing.. i have 125k on mine been doing since first oil change. and twice a year once begining spring and once before winter i do 2/3 of seafoam in oil right before oil change drive highway for 2o min.. drain oil... only issue i had @ just over 100k was the intake manifold gasket.. did my valve covers while i was in there .. those lifters still looked new.. corsa cold air.. flowmaster duals.. and diablo tune.. shes fast but i still baby it.. no need to dawg it..

  • @HotRed00

    @HotRed00

    Жыл бұрын

    How is the truck running

  • @jesusfavela3434

    @jesusfavela3434

    Жыл бұрын

    @@HotRed00 still going strong at 220k, hi flow oil pump. Still idles like new and runs new. Reg maintenance schedule