Great quality videos!

@ShArPy1o1Games

6 ай бұрын

Really... Thank you for the comment as I recorded this less than 45 mins ago (from this comment) or around 1am here in the Land Down Under... Was a bit scatter brained as I explain in my "Episode Notes" at the end of every Video's description, including this one haha 😎✌️🤔

Thanks for the video mate! Nicely done service on the running machine✌

@ShArPy1o1Games

6 ай бұрын

Thanks heaps as always and cheers for the watch and comment 😎👌

I've already done it in my playthrough, and I imagine you have too. in a new video: Maintenance of one or two primary cooling circuits (pumps and steam generator) during power generation.

@ShArPy1o1Games

6 ай бұрын

So far in my Testing, 2 Loops are only needed to be running at any 1 time since they are able to produce more efficiently with 2 loops rather than 3 🤔✌️

You should be able to prevent it going over 100 if you buy a T2 freight pump and upgrade its output, will give you 225 L/tick instead of the normal 100/tick so that will really help keep the temp down in the condensor. Can still upgrade your T1 freight pump to get 150 L/tick if you are time crunched. In the future if you want to repair the circulation pump on the condensor you should do it every day, as 20% wear only takes 20 minutes to repair while your 89% wear took 1 hour and 46 minutes.

@ShArPy1o1Games

6 ай бұрын

Certainly good info and thanks for explaining... Didn't know most of that and I love how I'm still learning, thanks heaps 👌😎 Will have to use this info in future episodes 🤔

Could you explane more on how to balance every thing, I'm sometimes fighting either coolent or my reactor despritly trying to keep it level I'm always loosing a battle some where

@ShArPy1o1Games

6 ай бұрын

I will be releasing a full Hard playthrough in Career with Random Catastrophes and weather's ON... will be interesting to say the least haha

Would love a tutorial on bringing a new loop online while the reactor is in operation

@ShArPy1o1Games

6 ай бұрын

In what way do you mean...? 🤔😇 Getting a newly installed Loop operational while shutting down an old one for repairs? I similarly do this in my complete shutdown tutorial where I show you how to set up a new loop ready for operations 🤔 Let me know 🤔😇

Recently tried to run the reactor as long as possible without a maintenance shutdown. Was going pretty well. Ran turbine 2 and 3 constantly first couple of days with turbine 1 off and on. After a little bit, brought turbine 1 to 100% torque and ahut down turbine 2 for maintenance and then the same thing for turbine 3(in the middle of the night.) While i was doing maintenance on turbine 3, pressurizer levels dropped severaly resulting in severe pressure loss, got a lot of steam in the core and couldnt fix it. Ended up doing an emergency shutdown. Figured from the coolant loop layout that coolant pump 3 keeps the pressurizer filled, is there a way to work on collant loop 3 without the preesurizer loosing all its volume?

@ShArPy1o1Games

6 ай бұрын

The pressuriser is closest to Loop 01, the condenser is closest to Loop 03... I think the reason of the pressure loss could be due to the wear or integrity on the core vessel itself or it could be a steam pocket that's built up in your Primary Coolant? Hard to say but it's always fun to learn new things... Is the Steam warning starting then disappears after a short while? (Thats due to the pressuriser not really liking being in times speed at all and is known)

@Zulu87351

6 ай бұрын

@ShArPy1o1Games Not sure. I did leave the heater on for way too long. Went downstairs to disconnect transformers for them to get maintenance. Came back to over 200 bar in the core. After that, sudden volume loss in the pressurizer, then pressure loss. Then severe steam in the core. Core integrity was good as well over 90% wear was 40%

@ShArPy1o1Games

6 ай бұрын

The pressuriser works by boiling off a little bit of the Primary Coolant, if you left it on for to long the over pressure may have damaged the core vessel or you may have boiled to much off... the Feedwater Circuit Pump is used to fill the Inner Core or the Primary Coolant, try that but don't go to much as the pump takes time to prime up and down! ✌️

I think they should have hard mode with extra bills and it just generally being harder

@ShArPy1o1Games

6 ай бұрын

They are adding more difficulties... should be coming soon 😎✌️

I have 31 million, everything upgrade fully. I want to see an upgrade for the core. It is the reason i need to shut down after about a week.

@ShArPy1o1Games

6 ай бұрын

Oh don't worry... or should I say the opposite due to the fact that a Chemicals Update will be coming soonish that will be introducing Xenon and Hydrogen... It's going to change so many things 🤯🤯🤯 As always thanks for the watch and comment 😎👌

@poellot

6 ай бұрын

@ShArPy1o1Games any idea of the date for the next update? I have noticed the new door that i can not go through. I am now at 240 million. Lol, absolutely nothing more i can spend it on.

@ShArPy1o1Games

6 ай бұрын

The Dev said around a month for chemicals etc 😥🤯✌️