I really like that you've been bringing a lot of attention to this underated game. That said, and don't take this the wrong way, I think the "youtuber" voice and cadence needs to be turned down a few notches. As someone looking at these videos to learn a thing or two about the game, it comes across as a bit abrasive and "phoney". In general, youtube is best when it feels like you're listening to someone just sharing their passion and not when someone is putting on a "show". If I wanted a show I would watch TV. Listen to youtubers Hyce and Scott Manley and you'll see what I mean.

@ShArPy1o1Games

Ай бұрын

I honestly don't know what u mean as this took me a few tries at recording to get right without messing a step up or saying something incorrect... it can be hard to do what your asking sometimes with such a complex game... to many things going on at the same time to just "go with the flow". I hope this helps? 😇✌️

Thanks as always, these videos makes the game more understandable.

@ShArPy1o1Games

2 ай бұрын

No probs and thanks heaps for the feedback... 😎👌

I would not be able to play this game if is wasn't for your videos! Also, I wanted to mention that there is a reactivity gauge on the chemical control panel as well as the reactor core panel, so you don't have to look across the control room to see reactivity (It is to the right of the Ion Exchange Capacity gauge). I can't wait to see more videos from you on Nucleares! :)

@ShArPy1o1Games

2 ай бұрын

Thanks for the comment and the tip... I might actually pay attention to the rest of that panel in future now haha... gotta check all those updates out 🤯

Idk if it's a good way to run the reactor but I like to start out, filling the boric acid to the 3600ppm and then pulling the rods out to let the reactor warm up slowly and in a stable manner, it avoids these huge jumps of iodine and xenon. It does take a while for the reactor to get to operating tempature but it doesn't create these ever changing ripples of reactivity.

@ShArPy1o1Games

23 күн бұрын

Yes and since this episode release, there have been many changes to the production of chemicals etc. ✌️

I like the unedited videos I am learning the game by watch you. One question I've never seen anyone use the max setting on the shutdown switch you know anything about it?

@ShArPy1o1Games

2 ай бұрын

The 'Maximum Mode' doesn't have any effect on the Reactor as of the current game state... I'm pretty sure it will have a significant impact in the later stages of the game 🤔🤪

i have over 300 hours on this game i have started again without the cems today hacked 8500000 in the game and got all the loops gens ext i do love using the cems but sometimes it's nice just to generate power for days and not worry about the Zenon killing the reactor

@ShArPy1o1Games

2 ай бұрын

I might have to try it your way... A chill game sounds good 🤪👌

There is a new tutorial for the game also if you`re new to the game. The new Tutorial helps better then what the old one did.

@ShArPy1o1Games

Ай бұрын

Has a tutorial been added to the game now? 🤯

@GamingGuy256636

Ай бұрын

@@ShArPy1o1Games yep check it out

Yeah, digging this more unedited style.

@ShArPy1o1Games

2 ай бұрын

Thanks heaps... I'm quite glad as I honestly dislike doing intros and asking people to Sub, Like etc in videos as im terrible at it 🤣... and am more of a 'down to earth' kinda guy that goes with the flow 🤪😎✌️

hi, im strugling with chemicals addon, begining looks very smilar to your video, but iodine levels are very slowly rising and rising, and after 3-4 days levels are out the roof, and reactor is just stoping, and i dont know what to do to drop iodine levels it always rises. day 3 4:00am and reactor is slowly stoping even with rods all out and boric acid 1200 and filtering it at 100% speed to try to save reactor. for most of the time i hold core temp aroung 370~ ( +/- 10 )

@ShArPy1o1Games

Ай бұрын

There is a Tutorial now called "Apprentice Mode" when you start a new Game... try that or watch me do it in another video on my channel 🤯😇👌

Startup is ok, runs constantly is ok, I have only trouble with the shutdown for maintenance. I inserted the rod and the temperature decreased to 19 degrees, but the Reactive light is still blinking red and yellow. My vessel is full of boron, can you show me the shutdown procedure step by step?

@ShArPy1o1Games

27 күн бұрын

Shutting the Reactor down doesn't perform as it should... specifically referring to the xenon and Iodine... Normal procedure is a 3 day wait for the xenon to dissipate out of the core using its half-life .

I´m really wanna see how you ran 2 or 3 Cycles for longer then 24h Ingame Time while outputting 25MW

@ShArPy1o1Games

2 ай бұрын

Can be done, will need more loops installed though 🤔✌️

@AK89theREAL

2 ай бұрын

@@ShArPy1o1Games My Problem with 3 Loops are the Iodine and Xenon Production when i try to run Main Coolant over 10% Speed. 22MW Energyproduction is Maximum with my settings without toxicity my Core. Hope you can show me what is possible to do

@ShArPy1o1Games

2 ай бұрын

It may have a small bug as I know for a fact that the coding of the game is a complete mess at the moment.,, maybe make a bug report in the Nucleares Discord Channel? 👌😎

@AK89theREAL

2 ай бұрын

@@ShArPy1o1Games i do so. like they said to me, its not balaced but you can run on full Capactity. So when you start with 2 or 3 Cycles, you have to look on your Coolant Flow not reaching over 150Lpm. Then its possible to get enought Power.

Finally, I found a way to maintain the reactor with Boron levels (which is to keep the Reactivity meter at the middle, green level). But I only maintained the reactor until the 4th day. One phenomenon that occurred was that the Boron filter pump was broken, I had AO repair it, but after the repair was completed, turning on the Boron filter pump, it works for 5 seconds then fails again. I ordered AO to fix it again, but when it was done, it continued to break again. Is this a game bug or a player fault? If you know, can you share me the way to fix it (filter pump)? Thank you very much 🎉

@ShArPy1o1Games

28 күн бұрын

May be a bug in the game, and the best way would be to report it via the Nucleares Discord. It may also be due to having too much coolant in your internal vessel, and your boron pump cannot pump anymore in due to it having no room, etc. 😇🤔✌️

@tranhai8895

28 күн бұрын

@@ShArPy1o1Games oh thank you, the boron dosing pump works fine, I only have a problem with boron filter pump

@ShArPy1o1Games

28 күн бұрын

Your filter pump works a little differently and has a capacity of effectiveness... in other words if it gets to 0% capacity, then you cannot filter any Boron out of the core (to increase reactivity and temp) till a filter clean is completed

@tranhai8895

28 күн бұрын

@@ShArPy1o1Games my iodine absorp capacity is 70%, it's still fine

@ShArPy1o1Games

28 күн бұрын

That's the one, couldn't remember the correct name off the top of my head lol.... May possibly be due to a bug then perhaps? Try bringing it up to 100% and make sure the valves are in the correct operating position and try again? 🤔🤓

Starts getting really serious when u have to look up the instruction manuel.

@ShArPy1o1Games

2 ай бұрын

The notes I was referring to was my personally written notes from my research etc... but I have also looked at the instruction manual due to it being a game and not 100% realistic... yet 🤔🤯

this is a really hard game to run

@ShArPy1o1Games

2 ай бұрын

It has its ups and downs... 🤪🤣