Hey mate, just wanted to say a MASSIVE THANK YOU for this guide. I just did this for an Australian 2016 Mazda Astina. My USB module was right under the air con under the Mazda screen. I used the "drill" method to get it out without having to pull apart anything other than the front dash modules. I couldn't have imagined doing this job AND filming AND narrating it all. That's real effort and a MASSIVE help to DIY newbies like me. THANK YOU!

Just wanted to add that I used this walk-through to install the retrofit kit in a 2014 Mazda 3 which already had CMU version 70.00.100 4A N (Australia) installed. I didn't upgrade it and it works perfectly fine. Thanks a lot for the clip! Saved me a few hundred $$ 🙏🏽

Hey, I just wanted to thank you so much for this video! I recently bought a used 2016 Mazda3 s Touring, so this is *exactly* what I needed step by step, fool proof. Love my car, love that it has CarPlay now. Keep up the good work!

@GregPettus

4 жыл бұрын

Wooo glad i could help!

Thanks for the video! My son and I just did this on our 2017 Mazda 3. We were able to get the old hub out without taking the center console apart. After reading comments here and other places we decided to try to get the old hub out without taking the console apart. After we removed the head unit from the dash, you can look down and see the top two clips on the old hub. We each used a long screwdriver to depress the top two clips while I used a pair of needle nose plyers in my other hand and grabbed the hub between the SD card slot and one of the small holes and pulled and the hub came out fairly easily and there was no damage to the old hub or the dash. Just a matter of running the wires after that. I also had previously had the firmware updated to the latest at the Mazda dealership. While there for regular service I asked how much they charged to update the firmware and they said $35. I said do it! I had gotten the firmware from Ash8 (Big Helper) at Mazda3Revolution so I was going to flash it myself until they said $35, no brainer. The unit and CarPlay works perfectly.

@savydaniel

Жыл бұрын

$35 seems a fair price.

Thanks for this! Great tutorial, 100% worth doing it yourself than paying $600+ at Mazda (I was quoted $599 + tax) *****FOR INSTALLING IN MODELS WITH AUX/USB UNDER DASH/CLIMATE CONTROL****** There are 2 ways: 1.) Do exactly as Greg did + remove the large center dash trim that's in front of the gear shifter, wraps under the A/C and around the left and right side under the dash. Once you dismantle the cup holder and gear shift trim, you can basically pull that larger trim piece in front of those toward you enough to be able to access the area behind the frame holding the factory usb/aux unit, and take the unit out by releasing the clips holding it in place. With that large trim piece removed, it will also give you plenty room to run the wiring. A little tricky to get it all undone, but putting the trim back in is a breeze. You will need to unplug the harness connectors for the gear shifter + volume knob. Don't forget to reconnect those when resetting the trim or you'll be removing the trim again! (happened to me, no big deal). 2.) You can drill straight into the factory aux unit and break the clips holding it in place, and kinda wiggle/pry it out with a flathead screwdriver, without having to remove any trim, as explained in this guy's video: kzread.info/dash/bejne/m4ilp9aGaZTaYKg.html I however tried this and almost succeeded, I ultimately gave up and did option 1 which yes, is time consuming and annoying, however, I discovered I ended up breaking 3 of the clips and just missed one. I also ended up scratching the edges of the frame that the aux unit fits into with my drill unfortunately. Not a huge deal but would've preferred that not to happen of course. My large drill bit was what basically held me back from successfully doing this, it made it difficult to actually start a hole, so if you go this route, make sure to use a 1/8 bit as he suggests. It's worth trying at first if you're ok with risking scuffing up the edges of the frame, and have no intentions of salvaging your factory aux unit.

Dude, huge help. just got mine installed. what an upgrade. Can't believe I didn't do this sooner. Awesome step by step and how too. Thanks for making the vids and showing everything. Kudos

Just for showing me how to remove my trim, infocentre and centre console.. This section of video has given me more information than any other I have looked for online. So I'll be subbing and doing my led's my center pad cell phone charger, led's in drink holder, and... single line led along the trim too. THANK YOU SO MUCH!!!

Thank You very much for your videos. I followed your instructions as shown and it was kind of easy to complete the installation. The only tricky part for me was to route the wiring from the dashboard down to the console center bay. I just installed mine in my Mazda3 HB 2014 and it works perfectly so far. Greetings from Mexico!

@GregPettus

4 жыл бұрын

Glad i could help!

Just installed CarPlay on my 2015 Mazda 3 thanks to your help. Saved myself a few hundred dollars!

this was my bible for doing this install. thank you so much Greg!

@GregPettus

4 жыл бұрын

Happy i could help!!!

Followed your steps, and I must say, Android Auto is a blast in my 2015 mazda 3. I opted for the firmware update at Mazda ($25), they did it with the engine on and the sdcard inside, but hey, it works. Everything works perfectly, so thank you for the instructions.

Thanks great video, couldn't believe how easy it was in the end, UK 2014 Mazda 3. Took me a couple of minutes to work out where to feed the cable down, but taking off the side panel at the footwell helped.

Great video. Just a tip for other, if your HUB is under the climate controls like mine was it helps to loosen the entire center console and slide it back to make getting the old HUB out much easier. Just search for center console removal for your car and it will come right up.

Thanks for this. Just came around to do it and it helped me alot. Already had 70.00.100 installed on my M3 2018 GT so didn't have to touch the firmware. Took about 1.5 hours, works great!

Thank you Greg for the "entertainment". You have the best youtube guide out there and I was able to follow your steps for a successful install.

@GregPettus

4 жыл бұрын

Glad i could help! Glad it went well

Just finished and your video and Ash8's instructions on the SW install were perfect! Thank you for this. 2016 Mazda3, took about 2 hours but was actually pretty easy. I just watched the video over and over and over to make it take hat long. Could have finished in 1 hour.

@GregPettus

4 жыл бұрын

Sweet!! Glad we could help!!

Greg, thank you for making this video! I got it installed in my mazda3 easily following your steps and it works great. Appreciate your content!!

@GregPettus

2 жыл бұрын

Of course! Glad i could help!

Many thanks for doing this video!!!! I just installed it on my Mazda CX-5 2020 and couldn’t do it without your video. Much appreciated!!!!!

@GregPettus

4 жыл бұрын

No prob dude! Glad i could help

Just wanted to say thank you! I got this done yesterday and thanks to your video it was extremely easy! You rock

@GregPettus

2 жыл бұрын

Love to hear it! Youre very welcome!

Really appreciate this video. Just installed the parts into my Mazda and you helped a ton. Thanks!

@GregPettus

4 жыл бұрын

Glad i could help!

oh, mate ty so much for that clear instruction! I installed ease it by myself without any doubts

Well done video! I gained confidence watching this for sure... Thanks Greg! Easy Breezy, Car Play up n running. Stoked

@GregPettus

4 жыл бұрын

Wooooo glad i could help

One thing I like about the new mazdas are a lot of their parts are interchangeable with shared part numbers as well as put together the same way.

Cannot thank you enough! You made it really easy and helped me alot. It saved me plenty of time and stress cells!

@GregPettus

4 жыл бұрын

Yassss glad i could help

Thanks so much for the video; just did this Friday night and it was pretty easy and I'm stoked to have Apple Car Play now in my Mazda 3. One note - I pulled the glove box, but didn't see the need; was able to route the cable from behind the screen and through the console pieces without having to access that area.

@GregPettus

4 жыл бұрын

for sure that can work. I was just following the factory recommendation. Sounds like your way work so thats great!

I just got a 2014 Mazda 3 GT Hatchback, it’s a very nice car. Interior is very nice, and upgraded the touchscreen to Apple CarPlay. I like how Mazda provides a oem kit to for it, no other company does this. Very impressed with the car.

@GregPettus

Жыл бұрын

Yeeeeahhh

Pettus you are the king! Did this for my 2017 Mazda6 Touring, worked great. Had to figure out some of the trim since it's different but was all good. Anyone can shoot me a note if they have issues with a 17 Mazda6

@TheRedsox2012

2 жыл бұрын

Hey I have a Mazda 6 2017 touring. How do I update software?

I really appreciate this video. Helped me a ton putting in the parts myself in my 2015 sGT Manual!

@GregPettus

5 жыл бұрын

darkcalw824 of course!!! Glad i could help!!

Woah! Thanks for the video. Watched and paused as I was doing the install. Easy install. Just take it slow and easy.

@GregPettus

5 жыл бұрын

Youre very welcome. Slow and steady is perfect! Glad it helped

Thanks for the step by step! Everything worked. Only difference for me, is that I went to the dealership for the software install. They charged me $75 but I’d rather that than bricking my unit.

I finally replaced mine following these instructions. Took a while to find the correct current version for Australia but the hardware replacement worked very well. Thanks for the information!

@arashjalalian

Жыл бұрын

do you have the link for Australia by any chance? I can't find it.

Another thank you for this video, helped immensely. The official Mazda instructions were also helpful, but a bit confusing on exactly where to route the cable behind the dash, so I kind of improvised a bit and used ties and sponge tape. Worked great. 1 thing to note, ACP or AA did NOT work right away for me once installed, I had to disconnect the Negative battery terminal to "reset things" and then they both worked. Also, looks like touchscreen function is inactive for both ACP and AA once the vehicle is in motion. -2016 Mazda 3 s GT Hatchback.

@GregPettus

4 жыл бұрын

Yeah unfortunately the AA is completely touchscreen disabled.

I just finished installing this and i could not have done it without your help. Thank you!

@GregPettus

2 жыл бұрын

Glad i could help!

Thanks for the vid. This will be a big help. I just bought a 2017 3 with the 6MT and it's a fantastic car. My kit showed up a couple days ago and I'm itching to install it. I used phone mounts in the past for android auto on my older Miata but they look ugly and tend to fall off in our brutal heat. It was nice of Mazda to throw a bone to people with older models.

Today i've installed this in my mazda 3 from 2013 even if manual says that this is for 2014+. Works like a charm.

I was thinking of doing the same install myself but was a bit weary about the cabling. Now that I know it's this easy, I"m definitely going to buy it now.

@GregPettus

5 жыл бұрын

Do it!

Hey Greg. Thanks for the fantastic video. My only change would be, I would of like to see you feed the wire in, since the video shows after the fact but none the less but helped me a lot. Also for an FYI anyone reading this, I did it on a 2015 Mazda 3 gs as well and it was a manual transmission. Need to screw off shift knob but there is one less cord underneath to unplug. Thing I thought most challenge was infotainment system cause some of the existing wires don’t leave much extra slack. So I advice to have a partner holding a light and if you can have someone with small hands.

Thanks so much for links and the wiring pictures at 6:38 made things much easier! :)

this vid helped me accomplish this with a flawless install! Thanks!! 🤩🤩

Awesome video as always. Love the red start button.

@GregPettus

4 жыл бұрын

Thanks!!

This video and part 1 were very clear, instructive, and still work today. Thank you!

@maverickw3056

2 жыл бұрын

Hi after installing this did Apple CarPlay touchscreen work for you

@NaviListen

2 жыл бұрын

@@maverickw3056 Mine is Android Auto but yes, worked perfectly.

Thanks for the help! I was able to install it today in about an hour

Thanks for the video tutorial. I managed to install it on my Mazda 3 SP25 2014 GT. I skipped using any of the cable ties, I hope it won't impact longevity too much. 6:38 was tricky as it didn't show which cable to connect back. There was a port without a cable connected, on the far right of the CMU/infotainment end. I plugged what could fit and tested it and it worked, so I guess all good?

Thank you so much for this video. It helped me install Android auto without any hiccups. 😊

Thanks! I have a 2016 mazda 6 and it's almost identical on the inside. I already updated my firmware and have the new hardware. I plan on installing it tomorrow and this video was a great help!

@patrickoneill1011

2 жыл бұрын

Hi there. Congrats on the upgrade! 👍 I have a Mazda 6 that works fine after the FW update, but I saw this kit that he is using that included a HUB with the cables. Android auto shows up fine without this HUB hardware. What's up with that? 🤔

@GregPettus

2 жыл бұрын

Some years came with the new hub pre installed. Or dealer replaced it before selling

Really informative video. Successfully installed CarPlay on my Mazda . By the way there is a new update which doesn’t require separate fail safe installation . I directly updated my 33.00.500 sw to 70.00.335C. This version has already fail safe in it. Thanks

Thanks for th video really helpful. I just installed it with your help.

This was THE video that made this a relatively simple process (I did lose the ONE screw in the deep depths of Mazdaland. But, was lucky enough to have those bolts on hand.) Thank you so much Greg! For your video and for buying the Mazda3 model with the CD player.

@GregPettus

2 жыл бұрын

Of course! Glad i could help!

@DinilJay

2 жыл бұрын

@@GregPettus Hey Greg, the download for the AU region is not working, do you have an alternate link?

@Timmy_Arnold

Жыл бұрын

Would you know what size bolt is used to secure the screen unit in place. I’ve lost my bolt to Mazdaland - it’s in there somewhere 😅

Thanks for your video it helped a lot!

Excelent video, it help me a lot. I did it my self. Your video is very complet and the steps are very easy. Recommend to do the same on cx5. Best regards

Thank you, followed you tutorial today. Great help.

@GregPettus

Жыл бұрын

Woo glad i could help!

Thanks so much Greg! I was able to follow along your videos and finally upgraded my car. Only video suggestion is that you have to end it with Yellowcard 😁

@GregPettus

3 жыл бұрын

Haha i wish i could!! That would be fun

Was very helpful! Thanks. Btw if you are lazy like me and want to take of less panels, this cam be snaked from the driver side footwell too by taking off less panels

great vid, a bit more involved than I thought.. too much trim removal, just got to be super careful.. those trim pieces break and scratch up too easily

@GregPettus

5 жыл бұрын

Just take it slow and work your way into it. You got this!

@User-cb4jm

2 жыл бұрын

I now see why Mazda charges AUD $495 for the install. I thought they were price gouging but clearly there’s a lot of labour, it’s not just a quick and easy software update or just the removal of the USB hub with a few easy screws. Not for me, I’m booking it in to my local Mazda dealership.

@iamdarcside

Жыл бұрын

It's just a few trim pieces, this is super easy.

FYI for those struggling to get center console off - The center console of my Mazda 3 2016 model with an electric handbrake wouldn't come off without undoing a screw accessed underneath the rubber cup holder insert

Thanks dude Just watch and I got it in 1 hour and a half

@GregPettus

4 жыл бұрын

Heck yeah!

Thanks! This video helped a ton!

@GregPettus

5 жыл бұрын

Of course!!!

Can you do an update video on this? How you've been liking it and did you get the new OS?

Thank you so much for saving me $300 from the dealership! Really appreciate it!

@GregPettus

3 жыл бұрын

Glad i could help!!!

I'm going to hold off on getting that new hardware for my 2015 mazda3. Currently, have AA via AIO and touchscreen works just fine. Thanks for the video. Still waiting for a response to that mirror assembly replacement :)

@GregPettus

5 жыл бұрын

I think I responded?

@MrUser999999

5 жыл бұрын

Have you had any issues with AIO?

@ant_mag

5 жыл бұрын

@@MrUser999999 I have it. It works, but the biggest issue is that the original USB inputs are trash. Very low power throughput (you may have noticed your phone barely charges if at all when using them). So when using AA with AIO, it's a big laggy especially if you try using the GPS and music at the same time. Every time I make a turn with the GPS up, the music skips as the map turns. So I just keep the GPS minimized while listening to music.

My car is weird. 2016 Mazda3. The arm rest has the cigarette lighter, but the SD card reader and USB ports are under the dash in front of the shifter.

@GregPettus

4 жыл бұрын

Haha that happens.

@jonyD143

4 жыл бұрын

Yours is in the front right? I have the same thing and I haven't found any directions on how to get it open so I can install this Android auto hub unit

@Movie_Games

4 жыл бұрын

@@jonyD143 Ya, I can't find any directions on front install either.

@jonyD143

4 жыл бұрын

@@Movie_Games I retrieved the directions. Here you go man and good luck. drive.google.com/open?id=1NfGmgWGAOgAqV3mVBwVB1T-nggJGvcdp

@CoasterVaultExpert

3 жыл бұрын

Replying to this thread just in case anyone else needs the help. (I just did this June 2021, Mazda 3 Hatchback GT 2018. W/ electric E-Brake) It took me about 5 hours, only because I was struggling with the hub and had to go back and forth with instructions. I could easily do this in an hour now that I know what I'm doing) Definitely follow the instructions in the link this guy posted. You can also watch this video's steps up to removing the center console (as it will be different). But the rewiring portion is similar if not the same. Instructions as follows - 1. Install firmware/updates 2. Remove glove box 3. Remove front trim. 4. Remove infotainment screen 5. Remove passenger side wall (instructions say you need to also remove driver's side but I didn't do anything on that side) 6. Remove center console (cup holders and storage) you should be and to lift up and move it back to your back seat a little. 7. Pop off shift trim (this allows you to lift up the trim enough for later when you need to push back the entire front console 8. Remove front console (portion beneath USB hub) (truthfully, it might be easier to do this before removing the shift trim) 9. Remove consolefasteners (you will know what I'm talking about when you read the instructions) 10. Pull forward carefully the entire front console. From here you will have popped off the section that holds the USB hub and other things. Here, you will be able to see the TOP tabs that are holding down the USB hub. This is where you may or may not need someone else's help, depending on hand size. From the opened glove box area, OR even the space from the opened portion that you just created from pulling out the front console, you should be able to force ONE TAB AT A TIME, down enough so that it releases. You also have to push forward at the same time as you do each tab.This will push the top portion of the USB hub out. You will know if you are doing it right it wrong as you will be able to see if it's leaning out or not. The bottom tabs are extremely hard as it is not possible to reach them as they are being blocked by something else. However, you should be able to with brute force, push the entire USB hub out once you have the top two out. 11. At this point, if you have gotten it out, you will finally be able to replace the old USB hub with the new one. After that, you will be able to wire it up back easily and up to the infotainment screen or it might be easier to wire down from the infotainment screen. (I recommend testing to make sure it works before fully reassembling) The hardest part is removing the USB hub, but, even if it seems like it won't come out, it will! Just takes some force.

I just plugged my phone into the usb port. Works perfect.

@GregPettus

3 жыл бұрын

Yeah probs had it already updated

Thanks man, works perfect!!!

@GregPettus

5 жыл бұрын

Wooo

Your video made my install a breeze! Thanks very much!!

@GregPettus

2 жыл бұрын

Of course! Glad i could help

@maverickw3056

2 жыл бұрын

Hi after installing this did Apple CarPlay touchscreen work also, Im not sure if it’s just me but, you know how before installing CarPlay there was a little bit of delay when pausing and skipping songs, after installing CarPlay did it still have this lag or delay

I thinking of doing this update soon but I have 2 questions I haven't find answers for. 1) can I use the steering wheel buttons in android auto, like the voice button to use google assistant? 2) did the touch screen eventually start working?

Just wanted to say thanks for these videos. The physical part of the install was only about 45 minutes, and was totally painless.

@GregPettus

4 жыл бұрын

Wooooooo. Sorry for the late reply

Thank you. Appreciate your time. It works, took me less than an hour.

@GregPettus

2 жыл бұрын

Sweet glad i could help

@maverickw3056

2 жыл бұрын

Hi after installing this did Apple CarPlay touchscreen work also, Im not sure if it’s just me but, you know how before installing CarPlay there was a little bit of delay when pausing and skipping songs, after installing CarPlay did it still have this lag or delay

@globerunning1437

2 жыл бұрын

@@maverickw3056 Yes, there sone lags and bugs sometimes. But all in all, it is not bad. I have software update - cmu150_NA_70.00.367A

GOAT of a tutorial

Thanks for answering

Thanks for the video! Great to know what people are getting into. I'm techie and love doing these kinds of projects, but this one might be worth having the dealership take care of.

@GregPettus

4 жыл бұрын

Its always daunting the first time but really not that bad. Building a desktop is way harder.

@surajvenugopalan2462

4 жыл бұрын

Hey! Just got this installed in my 2017 Mazda 6 Touring tonight. Did it myself out in the rain and dark. You folks can do it easily in daylight. I'm a hardcore DIYer so the light didn't bother me. Its super novice level work. Took about an hour.

@playstak

Жыл бұрын

@@GregPettus I built several desktops over the years in the past but this one looks very daunting for me. One of the dealers asked £295 to get it done so wondering if is worth going with that.

@OsaculnenolajO

Жыл бұрын

@@playstak It seems the hardest part is installing the firmware. If you can manage that on your own the rest is really simple. Its literally a single bolt, the rest is just clips holding it all together. You just pull it apart, unplug everything, replace the old units, and plug it all back in with the new cables.

@playstak

Жыл бұрын

@@OsaculnenolajO Thanks, I have finally done it myself. Did take quite a lot of time but everything is working perfectly. I messed up in one part, I dropped the bolt inside the console... no Idea on how to get it back now lol

Great video man!

@GregPettus

4 жыл бұрын

Thanks!

Hello Greg, great video, very nice filming . One question, did you remove negative cable before ? can I have any problem removing battery cable, like losing/damage any data?

@GregPettus

4 жыл бұрын

Did not remove the negative terminal bc there wasnt many dangerous thing. Shouldnt have a problem pulling the negative.

Thank you for this

Just used this guide for my car, thanks! Lost the nut behind all the panels when I was refitting everything, never getting that back 😂

@GregPettus

Жыл бұрын

Haha i am always afraid. I would probs find a way to get it cuz the head unit will rattle if its not secured... unless you replaced it

@IsaacktheBassist

Жыл бұрын

@@GregPettus i can replace it no problem but fetching the first lost bolt is going to be quite difficult I think

Thats really cool, nice video. 👌

@GregPettus

5 жыл бұрын

Thanks mang!

I will be attempting this tomorrow🤞🏼

@sudha4128

3 жыл бұрын

You're a brave guy!'

🤯installation was 👌 video a great help

@GregPettus

4 жыл бұрын

Sweeeet!! Glad i could help

Can your phone connect to the android auto wirelessly or does it require a wired connection.

What's the audio quality like ? Do you have any distortions, static etc?

Thanks a lot!

Great video thank you!

@GregPettus

5 жыл бұрын

Thanks, Of course!!

Great video and instructions. When did the CP and AA apps show up on your screen? Was it only after the new USB hub was installed? I successfully upgraded my firmware, but don't see the apps yet. I'm hoping that's only because the new hardware is not installed yet.

@GregPettus

3 жыл бұрын

Yes it wont show up unless you have the new hardware

Im just scared im gonna mess up and break something :l but I did enjoy this video! Helps me understand the process... !

Updated the OS and parts will arrive today. Video looks great but wondering one thing: after removing trim, etc will I be removing old wires before snaking in new ones? Thanks?

@TheFourslaters

Жыл бұрын

Never mind, directions with unit just said to tie off the old cords. FANTASTIC VIDEO, THANK YOU SO MUCH!

Hey Greg, thank you for the video. I do have an issue with my commander knob. It works fine when I rotate it or press it to make a selection but when I use it as joystick(up down left right), it won't work. Do you know why and how to fix it? Your help would be greatly appreciated

@GregPettus

4 жыл бұрын

eek not sure what that could be. Do you have the latest firmware?

Thanks for video. Have you thought about making a video on how to remove the CD player and maybe installing additional USB ports?

@GregPettus

5 жыл бұрын

I did at one point. I will look into it.

Hey Greg. I saw you made a quick comment about cars that don't have the CD player. That would be cars like mine (hand-raised) and so the aux/usb 1-2 panel on my 2015 Mazda 3 is located just above the front console box, forward of the gear shift knob panel. The reason I'm pointing this out... Is it really necessary for me to remove any panel back from the gear shift panel (i.e. any panel aft of the gear shift)? Thanks for your incredible video!

@GregPettus

5 жыл бұрын

You wont need to remove anything after the gear shift cuz there isnt anything there to work with. There is a different diagram in the forum post that shows where to ziptie things down and secure it for the front unit.

Thanks for this. Installed it today. Had a heart in mouth situation when I tried to test AA-> console blanked out. 🤨 Turns out battery had died. Jump-started and all worked ok. Question: did you ever get your touchscreen to work?

@GregPettus

4 жыл бұрын

No unfortunately

I had Apple car play installed for free but its in the center console under the HVAC 2018 (what year/trim is yours?). If I want to run it to the Armrest area, what extension cables would I need? Mind you, I already have the port, just need to extend it. Do you know where to get the instructions maybe?

@GregPettus

5 жыл бұрын

The cables should make it there. Gotta check out the tie down spots. You might need to buy the housing adapter for the center console. Or might have to fab one.

Is this just for Android auto or does does it work for Apple car play as well?

If you want to skip part 1 just take your Mazda into a dealership and ask them to update your car. They billed me for 40 mins

@Ladyj001

Жыл бұрын

How much was it? And what yr is your car?

@boomtsstbahhoughahh

Жыл бұрын

@@Ladyj001 depends on the rate your machanic charges. Mine is $100 / hour so 40 min was $66. I have a 2014

@MrPancakez101

Жыл бұрын

@@boomtsstbahhoughahh $60 is a steal, my local dealerships want $500 to do it

@boomtsstbahhoughahh

Жыл бұрын

@@MrPancakez101 make sure you are asking for a system update only. My dealership said the cost of supplying the module and installing it was $500 FYI the dealership doesn’t want you to do this because they don’t want you to do things for cheaper using after market parts and take money out their pocket. Be firm and take your bunnies else where if they don’t want to do it

@MrPancakez101

Жыл бұрын

@@boomtsstbahhoughahh thanks for the tip! ill call them again

great video! thank you for your share!! 👍😊

@GregPettus

3 жыл бұрын

Thanks for the kind words!

How can I install an 8 inch cx-9 head unit into my CX-5

Great video Greg! Do you know if I have to remove the trim around the shifter and center console since mine doesn’t have a CD player and the hub is just under the climate controls?

@garrysofjan3798

4 жыл бұрын

I was going to ask the same question. Also will this work for 2014-2015 Mazda 3? Thanks

@Anonymous-xb1be

4 жыл бұрын

Garry Sofjan After reading some of this: cdn.shopify.com/s/files/1/2367/6353/files/CPAA_Cable_Installation_Manual-_MAZDA_3.pdf?10 It looks we don't need to remove the trim around shifter and center console and not sure about it fitting those years. I don't see why it wouldn't since it looks like the same headunit, but again not sure

Where did you purchase it, can I buy it online

dude....you are amazing

@GregPettus

5 жыл бұрын

Thanks!

Would I be able to update the firmware in advance of the hardware? I am receiving the new USB on Tuesday and was thinking of updating the firmware this weekend.

@GregPettus

5 жыл бұрын

Yeah from what i gather its fine. No issues with pre loading the firmware

Good day, im hoping that you will see this comment, but i am looking into updating my 2014 mazda 3 hb with android auto/apple car play. however, the media hub i have inside my arm rest has 2 12V connections, a USB and AUX jack. So the new hub that is replacing that old one has the SD card reader for the NAVI Chip (genuine Mazda), so i took a look and sure enough i dont have the connections in the harness for that unit in the arm rest. my question is, even though i dont have the connection for the SD reader (for the unit in the arm rest), will that make a difference if all that reads is genuine Mazda chips? And since my phone will be connected via the dedicated USB slot on the new hub. Just dont want to spend the money and time to figure out that this wont work for me cause i dont have that connection for the SD chip reader.

Can you show how to update the android auto version? 7.9 is out now, but anything 6.x-7.x would be nice as well.

How long of an extension is actually required to remove the 10 mm bolt holding the CMU in? I have a 6”, is that long enough?

@GregPettus

4 жыл бұрын

May be cutting it close. But you can give it a try. You might have enough space in there tho with the 6".