Hack Android Auto onto your Mazda!
Автокөліктер мен көлік құралдары
Hack Android Auto onto your Mazda infotainment system! No hardware mods necessary!
WARNING: This is an unofficial third-party hack. It may damage your car or cause safety issues. You're taking on the risks yourself by doing this, and if you're not OK with that, get a car with manufacturer-provided Android Auto!
This only works if you have a recent Mazda that has the touchscreen infotainment system.
Site to get the tool: mazdatweaks.com
I'm not affiliated with the creators of this tool, so unfortunately I can't help you out with any bugs.
Пікірлер: 385
Keep doing videos. This was miles better than most on there. Thank you for not blasting background music and shaking the camera!
@riveducha
6 жыл бұрын
Thanks for your encouragement! Amazing what a tripod can do, right??
@fuoridiruotella8503
2 жыл бұрын
Hi, I have a 2016 mazda CX 3, firmware 56XX, can I install android? Thanks
I was SO scared to try this, but so far it's working. I like my speedometer :D Thank you so much for an informative video, I was able to do this myself.
Works like a charm on Mazda 3 2015 - Firmware EU v56.00.512A :) Thanks for the comprehensive guide!
Thank you for the best instructions, I installed everything in less than 15 mins.
It worked so well! I have a 2016 Mazda 3. And I did this in 2019. :)
@redwhite_040
4 жыл бұрын
Still working fine? Can you use android auto via bluetooth or do you have to connect it with the usb cable and phone?
@RandomGuyScrollingDown445
4 жыл бұрын
@@redwhite_040 there is a way to use AA wirelessly - mazdatweaks.com/androidauto/ I trust that you will read the whole page
@glagarwal
4 жыл бұрын
Worked only immediately after installation, can't connect after that. Did you face similar issue? Connecting via USB
@marinafocused
4 жыл бұрын
@@glagarwal Hello, yes, it only works back up again after you turn the car on and off again. Sometimes it ill work for like 10 mins then freeze. Other times itll work perfectly. It is very glitchy! But most of the time works. I found closing ALL your apps prior to connecting helps and not messing with the phone while you are connected. Hope this helps
@glagarwal
4 жыл бұрын
@@marinafocused I'll try to do that. Thanks :)
Works great! The past versions weren't that great but the newest one works like it was born there
This worked like a charm! I have a 2016 Mazda CX-9. And it’s so nice!
Worked perfectly on my 2018 Yaris IA, installed: no more disclaimer, touchscreen while driving and android auto. Over a week using it and so far everything works!
@syundown6005
4 жыл бұрын
Nice!! How's it holding up now? I just bought a Yaris ia about a week ago so I still have to check my version, but I was just about to comment the question about whether it works on a 2018 Yaris ia until I came across this.
@Edgar-bo8eq
4 жыл бұрын
@@syundown6005 It should. If anything email the email that the website provided. I did and they said it would work so I'm going to give a shot
@redwhite_040
4 жыл бұрын
Is it still working fine? Can you connect the phone to android auto by bluetooth?
@KevinJones-xh5yk
2 ай бұрын
How is this holding up?
it worked 100% on my mazda 3 2016 touring! thanks bro!
@CarlosGonzalez-oe5cz
5 жыл бұрын
Can you talk on the phone when someone call's through the car?
@redwhite_040
4 жыл бұрын
How is it working for you after one year? Any issues?
works like a charm on my 2016 mazda 6...THANKS MATE!!
Buddy it worked 💪 you have to restart the mazda infotainment system every now & then as it sometimes doesn't connect to anroid Auto. But it works 100% after that. I'm impressed
@timsavvy
2 жыл бұрын
Thanks for sharing. How do you restart the Mazda Infotainment? TIA! 👍🏼🙂
Wow that's pretty cool. Wish my Mazdaspeed came with Infotainment units. But I'm pretty happy with the Android HU options they got on Ali. Still, this is pretty sic
I did this on my Scion IA 2016 and it is so cool. It was easy and it works amazing.
is the issue with Bluetooth fixed? When someone calls me it goes straight to Voice mail.
If by some chance it doesn't end up working will it interfere with my actual car from functioning?
Could you the backup of the original android auto that came with the car before doing this? and if something error occurs, how to do reverse the system?
Are there any alternatives or work-arounds for those with iPhones?
I have a navigator in my Mazda but I don't have the SD card Does this hack add google maps or I need my android phone connected to the USB to make the navi works ?
I have a m6 2016 but as far as i know you need to have a usb unit that is compatible in your car and not all Mazda have it otherwise it wont work or am i wrong?
This actually worked! I'm loving the AA! I did every step by step instructions you did in the video. At first I thought I bricked it after using AA for the first time. I turned everything off while AA was running. I double tapped the Start button, and I could not go pass the default menu and everything froze. Keep in mind I have yet to turn the engine on the whole time since I installed AA. Then waited about 20 mins because I was doing research to how to uninstall and go back to factory settings. Came back to my car and turned the engine on and everything was back to normal! AA worked perfectly with the knob, Google assistant works with car voice promt button, and the back button worked in the menu for Google maps, Waze, Pandora, Google Music and I'm sure on Spotify as well. Keep in mind you have to keep your phone plugged in to the car the whole time while using AA via USB port. I did not know about that part.
@redwhite_040
4 жыл бұрын
So AA doesn't work wireless by bluetooth connection? That's a big drawback compared to other manufacturers.
@slighce
2 жыл бұрын
@@redwhite_040 Bro its a hack so chill
@nguyenle42
Жыл бұрын
@@redwhite_040 as far as I know, I don't think we have that technology yet, not for projecting maps into the car device via Bluetooth
@losajzerimar1893
Жыл бұрын
Will this work on mazda cx3 2018?
Sure works. Did it in 2020. Thanks man 👍 great job
@ianpats130
4 жыл бұрын
is it mazda 3 2016? and how is it so far? thanks!
@aldoalfaro1815
4 жыл бұрын
@@ianpats130 Mazda 6 and it still works well
@riveducha
4 жыл бұрын
Glad it helped! Enjoy the Android Auto!
I bought a CX-5 2017 unfortunately I have a 502 number...Canada. will it still work because it's not higher? Sucks because I traded my old Mazda 3 that most likely would have worked :(
thanks for that. All working like you said it would. Many thanks
Worked great! Thanks!
Nicely done video. Though one question, how long should it take to compile? Seems like it's taking forever. Says "Compiling...Please Wait....Files for ssh_bringback copied successfully!" Is it done with compiling all files or not? Update: had a bunch of options selected, then reduced it to the basics you had chosen in the video and it finished in seconds. It works pretty well. Though the usb port doesn't quite provide enough power if doing anything other than simply trying to recharge your phone (at least for Android). Thx.
Thank you! This worked like a charm on my 2014 Mazda 3 GT
@samn8309
3 жыл бұрын
Are you in North America? and Did you use maps with it?
@laxman_sivakumar
28 күн бұрын
Do you gmaps guide on heads-up display?
Will BlueTooth still work on the regular Mazda interface though?
brought a 2018 Mazda 3 grand touring. it keeps refreshing. so if I decide too remove the downloaded information, will I be able to uninstall it?
Anyone knows if this retrofit installation can be used also for converting the JDM FM band to EU FM band for 2017-2018 mazda demio(mazda 2)?
Will this work on the 124 spider?
Thanks, it's working 😀. Just installed, I was following the steps. CX-5, 08.2017.
@Concertfan201
Жыл бұрын
How does the display look like does it look like icons or is it the old version of Android Auto can you send a picture or something to show what it looks like
Thank you for the best instructions..Keep doing
for some reason my AA doesnt launch after I go into reverse. Also the map direction glitches and reroutes all the time which is annoying. figured it works if I plug in my phone when Im driving which discards the glitch. has anyone got this problem?
Can you answer phone calls with Android auto? I remember that other users are say they can't talk on the phone via the car.
Get to the usb in the car but my touching the screen will not allow me to hit the yes to start the download. the finger touch screen is not functioning. Can you help?
Thank you so much for this! Works like a charm! I did this in 2020 had to upgrade to the correct version but there is another video that gives you the download links to firmware
@cbazan12
10 ай бұрын
I have a 2020 mazda 6 that already has 70.00.335 NA. Do I need to upgrade anything or can I get started with this version?
Would you recommend doing this to install android on mazda that had 5 years of extended warranty left ( thereby voiding it ) OR just pay genuine mazda dealership 500 bucks to install android auto and keep warranty
@RobinPaulSylvester
Жыл бұрын
What did you end up doing?
Does this work wirelessly or need to be connected to the phone by usb?
I successfully downloaded everything in this video but im not getting android auto to work.. i downloaded android auto to my phone and connected via usb to the cmu and android auto is not showing up!
I have a 2020 mazda 6 that already has 70.00.335 NA. Do I need to upgrade anything, or can I get started with this version?
Do you have trouble running google maps and spotify in the background? Mine works but the audio is stuttering very badly, but once I switch the screen to spotify the music is fine.
If I do it and and dont like it, or I wanna sell it with an original software, will hitting factory reset bring it back to its original state? Thanks for help.
Is there any hack available for a 2015 CX-5 GT that has the Tom-Tom type head unit? Thanks!
Is there anyway to install this if your touchscreen does not work? Can it be done with the knob control?
Does anyone elses antivirus pop up when you install the MZD-AIO tweek?
Thanks, this worked perfect. 💪
I have a Mazda 3 2014, but my infotainment firmware/OS is 27.00.000. How can I get Android Auto to work?
Is there a way to go back to the stock software? In the event it fails or has bugs?
if i install android auto like that will the touchscreen work? cause i know that if i get the official update kit from mazda, aa doesn't support touchscreen
Is it possible to undo the hack if it doesnt work?
Will it work on Mazda Axela 3 Version of my car head unit is 59.00.445 ?
I successfully installed the the soft, however cannot connect my phone to the car. Can you prompt how to do that?
music cuts in and out alot more than bluetooth and one time my screen went black and i restarted my car and unplugged my phone but the andorid auto was stuck black so i didnt use it rest of the day, day after it worked again.. any way for me to fix these bugs?
@kingshonen
2 жыл бұрын
What's your current fw, Android version and Aio AA version? kzread.info/dash/bejne/dqd-r8uKl9PaYKw.html
What car is it? My Mazda 3 .2015 look different
I have a Yaris 2019 Toyota with 59.00.573 could this tweaks works? It has the same screen.
It doesn't work with mazda cx5 2019
thanks,works great on 2016 miata .Could not get castscreen to work
For some reason I don't have a USB slot above however I have one under my arm-rest. I have followed each step in this video for my 2018 CX-5 however don't get that popup even after waiting for 20 mins. Please help!!!!
Im about to install this on my Mazda, but the only question I have, can I still use the controls on the steering and the control knobs?
@AdolfSpitler
5 жыл бұрын
Indeed
Dumb question.. Mine is 59.00.502. Will this work or is the cut off at .501. Thanks
So this works with the existing USB connection and you don't have to replace it in your arm console? This is awesome. I used to be an android guy, but now we have iphones. I definitely miss being able to customize things so much with android. Wish their was a carplay option. I really dont want to go through the trouble of doing the new wiring for car play support on my 2016 CX-9 Sport.
Os version shows 70.00.351 JP M that means it can't work on mine. Right?
I am having a promblem when i plug in the usb drive to car i turn it on to accessory mode. But nothing pops up saying this aio tweaks installer. Please help. My usb is formatted to fat32 and my mazda system version is 59.000.540 Jp m
Can Android Auto be hacked to prevent forced updates? I am not talking about turning off updates in the Google Play. Android Auto has their own forced updates. I want to run an earlier working version of Android Auto compatible with my phone and the WAZE navigational program.
Is the Android Auto app on the car automatically connected to you phone?
does it work with wifi? or need to use a cable?
How about with 2016 Mazda CX3? Will it work?
I have a general question (to avoid misunderstandings and complications). According to the Warnings, the AIO is not compatible with v55.0.502+. Does this mean that the v55.00.502 is not compatible OR from v55.00.502 (and up) you can't tweak without extra actions? I have v59.00.545 on my Mazda 2. So my specific question is: can I tweak my infotaiment with the current version, without extra actions (serial connection)?
@riveducha
2 жыл бұрын
Any version starting with v55 should be good to go using the method in this video without opening up your dash. Double-check with the official site: mazdatweaks.com/
@bartekn8338
Жыл бұрын
Hi, u try on v59.00.545 without extra actions?
Hi, thank you for the video. What about language? Can I still use my language after this unofficial hack?
I have mazda cx 5 2018. Is this going to work for my car?
will this work on mazda cx9 2018 models? My build is 59
Wow so great. I have a new 2021 CX-3 and live in Thailand. We don't have Android Auto in our car. Would that work in mine as well ? Thank U
How easy would it be to brick the system? I want to try it but I'm hesitant.
@AdolfSpitler
5 жыл бұрын
I installed way more tweaks onto my Mazda like a custom theme, custom background, and stuff like no reverse disclaimer, menu layout change, and the screen cast mod, and have had no problem. If you follow the steps accordingly and do your research on different Mazda forums on Reddit or mazda3revolution then you should encounter no problems
Do i need to get some product for this? (Like the USB hub thing from AliExpress)
is there a reason why it wont work on a 2019 CX-3? I downloaded the v 2.8.6 version
Hi man, sorry for the noob question, but, in august will be released the official update, do you think that can be installed the official instead of the hack?Maybe a sort of "dump" of the official display can be flashed like Android phones with a recovery?Thanks a lot :) PS: My version is 59.00.502 :(
@riveducha
6 жыл бұрын
1) we don’t know for sure the details of Mazda’s Android Auto release. Could be August for Europe, could be next year. 2) it could require a paid dealer upgrade or be limited to certain models or years. 3) rumor is that Mazda’s AA doesn’t support touchscreen. Try looking on mazda3revolution.com for firmware files when it comes out.
I have mazda 3 2017 version: 59.00.441 is that compatible?
Hi, I have a 2016 mazda CX 3, firmware 56XX, can I install android? Thanks
Hey buddy, any updates on the updates? I’m on V70.00.351 JP M. I’m sure this would have been patched for my version, no?
My software version starts with 33. Will this still work on that version?
Does this work on 2019 cx3? Can this hack be removed at a later time
@CarsOfPennsylvania
4 жыл бұрын
look at your infotainment version like he says in the video. probably not though
So I had a weird thing happen. The dialog box popped up but I couldn't press anything. It just did not recognize my touch. So I pulled out the USB drive hoping to be able to start over. Probably should have turned off the car first, but I didn't. Now the yes or no popup is stuck on my screen and I can't get rid of it. Help?
@MrGogoZec
2 жыл бұрын
For anyone experiencing this problem, you just need to turn off the car for about an hour and it will go away on its own.
Also, after install is it required to connect the phone via USB or will it work via bluetooth?
@Studksc
5 жыл бұрын
USB or set up a wifi hot spot
What's the difference between this and new official retrofit? They say they install a new hub, anyone know why?
@stili774
5 жыл бұрын
Yes, only one USB can run Android Auto. The new plastic peace has a smartphone symbol with an arrow… And you get a one hour long update.
Do we need to modify the cables for this? Or this is just software hack.
@zemnihoussem5698
8 ай бұрын
do we need to do that ?
What can i do my ver.. is 59.00.544 ??
I'm on Version 51.00.xxx. Can I install AA anyways or do I need to update my Infotainment System? And if so, how do I do that by myself and is it easy? Is it even possible without contacting support?
@RolandJo
2 жыл бұрын
Mine is she same version, does anyone know if it’ll work??
So what/how to do when having a OS version that is 59.00.540 ?
Hi, my Mazda 2 has version 42.00.400 What should I do?
@hectorquiroa2194
5 жыл бұрын
You have to update your software first, there's another procedure for that, just look for "update software for the mazda infotainment", and then come back to this procedure.
I've Mazda 2 2018 and my version is slightly above 59.5 Is there any solution for me? Thanks!
@dalek29
3 жыл бұрын
Same dilemma. Mazda CX3 2019. Version 59.00.545
I don't understand a thing: this tweak still need to upgrade the harware with usb-port connection for android auto/carplay or use the standard one usb port?
@davidvanbochoven4237
21 күн бұрын
This tweak doesn't need the upgraded usb ports, but is not recommended as this tweak is not official and I don't know if it's compatible anymore with the latest android auto version/mzd connect-software. You're better off installing the upgraded USB ports (the new hardware) that supports android auto/carplay, much more reliable and stable. Be careful that you need to check if your mzd-software has the supported version (for android auto/carplay) before installing the new usb ports! (see guides online) Or go to your mazda dealer. (recommended)
Hi, if i have version 59.00.532 EU N this AA be work?
This is for android only does it work with iPhones also
What if I bought a car and I notice someone added this to my car how can I reset my car system back to normal.
@robertocastellaccio6272
4 жыл бұрын
Chris Richter same problem 😅😅
Would this work with a Toyota Yaris ia?
It also works on my 2017 Toyota Yaris IA with system OS start with 55!! However, make sure you have a GOOD cable. So far it only works when I use the original cable.
@petergarcia4078
2 жыл бұрын
Hey Near Yung! I wanna try doing this on my 2017 Toyota Yaris too! What do you mean by good cable? And also! Does the infotainment system start up with a Mazda logo since it's a Mazda tweak??
@nearyung6052
2 жыл бұрын
@@petergarcia4078 yup, it will show the Mazda logo instead of Toyota (which is not a bad thing, haha). If AA doesn't shows up after you connect your phone, you can try connecting it with the cable that come with your phone's package.The best buy manufactured cable also work on my car. Just don't use any cheap cable from Amazon. P.S. Sometime the screen will turn completely black but the system is still running (you can hear the sound and all the controls are still working), especially after you switch from R to D. Seems like it is because the computer doesn't have enough RAM to run AA. If that happen, you need to disconnect your phone and do a hard reset. I would recommend you only run 1 to 2 apps at one time.
@petergarcia4078
2 жыл бұрын
@@nearyung6052 thank you for such a quick reply! i have a C-port car charging cable from verizon that ive been using since i got the car (its not a USB to C-Port its one of those chargers you plug into the "cigarette burner" volt) i hope that makes sense lol. will that still work? also im curious to know why you think the Mazda logo over the Toyota logo is not a bad thing lol! thanks in advacne !
@nearyung6052
2 жыл бұрын
@@petergarcia4078 Actually I don't know the answer. You have to try it. I use the regular USB plug in.
@petergarcia4078
2 жыл бұрын
@@nearyung6052 thanks! One more question sorry to bug 🪲 but do i need to keep the USB with all the Mazda tweaks plugged in at all times or can I remove it once it's done uploading the tweaks
How do you delete it?
Please help it will not let me click, yes go on, but will let me control the head unit. Prompt wont go away or do anything so I have to factory reset it to restart it all over again just to run into the same issue again
@BRODEEZY43
2 жыл бұрын
Same issue, did you ever figure it out?
bro, i need eu rom, it would be good if it is between 55 and 59 but otherwise it may be in other versions, all the links on the internet give a file error and I downloaded the mexico rom to my car but the radio is causing trouble in the country I live in, I would appreciate it if you could help me
Hey i have a 2016 scion ia this steps will work for me ????HELPPP
@themoose1967
3 жыл бұрын
it should i checked the version and will do it to my toyota ia as well