How To Install Apple CarPlay/Android Auto On Your Mazda Infotainment System
Тәжірибелік нұсқаулар және стиль
Link to firmware update & directions to install
NORTH AMERICAN VEHICLE FIRMWARE ONLY!!: drive.google.com/drive/folder...
USB Hub that supports Apple carplay
OEM: www.mazdaparts.org/mazda-3-sm...
Amazon: www.amazon.com/Compatible-201...
Пікірлер: 185
DittyPitty, Hello I like your work , BUT People outside of North America are installing the wrong FIRMWARE.. NA N is Only for NORTH AMERICA. YOUR Google link has been copied from my original thread on this subject. The 55 Firmware Cut off ONLY Applies for NA N, what about EU N or 4A N, that cut off is 56.00.100 EU N not 55.00.650 for NA N, these are Not the same Firmware. Please can you either redo or add a Banner over your Video saying for NA N Firmware Only. Your video is causing a lot of grief. Regards ASH8
@DittyPitty1
3 ай бұрын
Awww fwick. Thank you so much for bringing this up to me and I sincerely apologize for any who is outside of North America installing the firmware. I’ll update the description and google drive to let people know. Cheers!
@AshGrantASH8
3 ай бұрын
Thank you for doing that pin, I got another this morning installing NA in a EU N car. Also NA N firmware is Half the size of EU or 4A Firmware which takes up to 55 minutes to install, why you must keep touching pedals to keep CMU Alive, if it turns off you will brick it. If you guys want firmware thats not for North America search my user ASH8 you should find my threads. This is not "set and forget" Firmware Updating.
@dwarnke72
3 ай бұрын
I have a ‘17 Mazda 3 and it’s on v59. Do you know how I can get up to v70 so that I can use the v74 that you provided?
@MergeMcadoo
3 ай бұрын
@@dwarnke72mine was on 59 as well and I went straight to 74
@MergeMcadoo
3 ай бұрын
@@dwarnke72I have both files if you need them
Can I just say, I bought my Mazda 3 Hatchback back home from the dealership this afternoon, thank you so much for this video, most condense, easy to follow tutorial and was a fantastic way forward. I have updated the firmware and all done and worked a treat. The USB Hub Port works and it's fantastic
@DittyPitty1
Жыл бұрын
Thank you bro! I’m glad I was able to help you out and save you some money cheers!
Just wanted to say thanks for the tutorial. After about 3 hours and a few moments of panic (updating firmware takes a minute and your screen will blank out a few times), I got it done. Showing how you did the wiring on the passenger side helped a lot too. Thanks! 🙌
@DittyPitty1
8 ай бұрын
That’s great I’m glad I could help! I also had moments of panic while doing the install as well hahaha.
Thanks for the information. Got it done today. The software update was straightforward. No hiccups. The interior part was different as I have a CD player where your interface is, and the interface is in the console. It was probably easier that way. The cupholder part has a hidden screw under the rubber bottom of the cupholder. You then pull it straight up. The console front panel (where the interface box) has 2 screws which are revealed once the center cup-holder part is removed. You then have access to the rear part of the interface, so pressing the 4 clips is possible. I routed the wires on the passenger side a bit like you did. Not much extra wires with this install location.
Dude, I am not good at any of this stuff and your video helped me so much. Thank you so much!
great video man! I know how expensive the dealership would be and I’ve been wanting apple CarPlay forever. I finally feel confident enough to do it thanks to this!
@DittyPitty1
10 ай бұрын
Thank you bro I’m glad I could help!
Thanks for the most recent software. The technique I used for the old USB/SD module worked great and wasn't destructive: grab 2 packs of those cheap Harbor Freight pick sets ($1-2), using the hooked ones, flip down the SD card flap and hook them into the holes. Pull firmly and steadily on both, and the face plate of the module should pop off. Then, you can access the inner side of all 4 clips. You now want to use the straight pin-like picks to wedge between the clips and the dash hole. Hard to explain, but look at the module in the video and imagine how the clips connect to the dash. With all 4 picks wedged between the clips, the module should pull out by carefully grabbing the edges with needlenose. If you weren't too rough, the faceplate should still have its clips intact, and you can clip it back on to the module/circuit board part.
Thank you so much bro! I have been looking to download cmu NA 74.00.324a for days and some websites were charging $20-$40 to download. Thanks for sharing this.
Thank you so much - worked a treat for me over in Australia
@DittyPitty1
4 ай бұрын
Did the software download work for you?
Totally worked. Took about 20-25 minutes on my 2014 Mazda 3. I was able to use a PNY 32GB USB 3.2 drive with no issue. I did not hook up a trickle charger but my battery was just checked good and I'd been driving today. Only needed to download the one CMU150 file, that's it. Directions in the PDF worked perfectly.
Mazda3 2017, firmware upgrade worked well! Thank you for the video. It took me days and days trying to get the firmware but without luck until this video. Called the dealership and they wanted CAD 95 plus tax to do this firmware update!! Now that I followed your video and have it upgrade, I ordered the kit from Amazon and will install the hardware this weekend. Total savings 505 - 170!
@DittyPitty1
2 ай бұрын
Glad I could help!
@winterMB91
2 ай бұрын
Have you installed the kit? If yes is the android auto touchscreen working?
@whiteflyingmonkey
2 ай бұрын
@@winterMB91 I installed it yes and the installation went well. I don’t have an Android but Apple and the touchscreen on that is working. I got the wireless version of the Kit (from Amazon) and to those who are thinking about the wireless version please save yourself time and money and get wired instead. The wireless is not stable at all. To return it of course I can’t drill holes so I have to disassemble the whole middle console to take the kit out for a return.
@winterMB91
2 ай бұрын
@@whiteflyingmonkey thanks for responding man 🙏
This worked perfectly, between your software steps and this other guy's interior advice was perfect. But your video was very clear 10/10
hell yeah 😁💪🏼 good stuff
Dude that was cool. My local dealer charges 350 euro to do same. I think I'll let them do it. I reckon I'd screw up down loading the firmware..probably download the Lion King or someit. Tx I've watched 10 of these videos and yours is the best. Tx
@DittyPitty1
Жыл бұрын
Thank you bro! Cheers!
@Kaminaanime7860
5 ай бұрын
my local mazda dealer said 500-600 usd :( so i was like lemme watch a vid but I think would mess up too lmao. Imma see if there is a guy who can do it for cheaper.😂
IT WORKED! Perfectly! Thank you tons!!!!!
@DittyPitty1
9 ай бұрын
Glad I could help bro!
@cherrysmoke33
21 күн бұрын
Did you use a usb higher than 16gb? They don’t even sell those anymore lol
Great video! I wish i had a mazda rn so i could update it!
@DittyPitty1
Жыл бұрын
💯
@bastogne315
Жыл бұрын
You can buy 1..I just did ❤❤
@bastogne315
11 ай бұрын
A 16 mazda 3. It replaced a 10 mazda 3. The 10 has a much better chassis and steering.
I laughed really loud when you said witerawy and I bet my whole office just heard the weird noise I made
@DittyPitty1
Жыл бұрын
Ha i bet they witerawy heard you bwoh
Hello bro can you send a firmware update for Australia New Zealand thanks
Hello @DittyPitty, I just downloaded the zipped file to update my 55.something CMU. Do I have to unzip the file? If yes, do I have to delete the other files (those that are not .up)? Thanks for your help
I only have to download one file to my usb drive right? From the link I clicked there’s five items. One that I could not open on my computer was the MD5_and_SHA_Checksum file. Just want to make sure I don’t have to download that onto the flash drive as well.
@DittyPitty1
11 ай бұрын
You don’t have to download that file. That file is a program used to scan the update to make sure it’s not corrupted. The only file needed on the USB is the update. Hope all goes well!
Ok but which files do I actually need to download to the usb? Cuz there’s 5 of them
Hi, do you have credible links to the EU-version of this update as well, and do you know whether 74 is the current latest version?
@DittyPitty1
9 ай бұрын
Sorry man but I only have the NA download. You can go on mazda3 forums and there’ll be posts about people who have the download you’re looking for and you can ask them for it. I’m not too sure if that is the latest update or not. Good luck!
If my stereo is the base radio for the 2014 I SV trim, then would this even work? Since I don't have firmware to begin with? Would like to install Alpine ilx 507 some time soon. Thanks!
@DittyPitty1
Жыл бұрын
If you got the base radio I don’t believe that infotainment is compatible with Apple CarPlay. If you’re looking to get the alpine ilx 507 then it should already have apple carplay installed. This firmware update is only for stock Mazda infotainment systems. Hope that helps!
Does the "DTC" deletion screen where you type in the numbers work without touch screen / work with only the captain's knob? My screen started ghosting so I disabled the touch capability
@DittyPitty1
11 ай бұрын
It works with the touch screen and the captains knob.
@rajmodi5669
4 ай бұрын
Hi there. I,for some reason, don't have a touch screen. Just got the 2016 Mazda 3, so still figuring things out. Anyway, I just completed the upgrade without touchscreen and it worked fine. Select the numbers with the knob and use the enter button on the knob. I couldn't get access to the "Clear" and "exit" buttons, but it still worked without that step.
A few of things need mentioning. We need to see in detail how to access the glove box and wiring there. There needs to be more deets on downloading and installing the firmware. There needs to be caveats that that non-OEM versions of AA/CP for Mazda are shit. They may work at best, 6 months then afterwards. they may stop altogether or randomly disconnect or reboot. While the intent of the video is great. A+.
The 74.000.324 update was a delight when I found it here. Only problem is after I updated the software from version 70 to version 74, Android auto is now not fitting properly. Any tips?
@DittyPitty1
Жыл бұрын
Glad I could help you out with the update! I wish I could help you with your issue but I don’t have an android so I’ve never messed with android auto:( sorry I can’t help you out mate! Best of luck.
Would car play still work through bluetooth if I didn’t want to replace the usb port
@DittyPitty1
10 ай бұрын
Unfortunately it will not. You have to have a USB hub that’s able to read Apple CarPlay from your phone in order to display it on the screen.
Great tutorial, thanks! quick question, i wired everything and it worked perfect, but when i hit a bump or even driving the carplay disconnects, i even change the cable and nothing, re wired and it worked for a while but again, any idea?
@DittyPitty1
6 ай бұрын
Thank you! Nothing immediately comes to mind but one of my friends had a similar issue and when they got a higher quality charging cable for their phone it helped a lot.
Is it necessary to do the hardware change? I already have a usb slot the same in my parents mazda cx 9 which is the slot for car play
@DittyPitty1
3 ай бұрын
For me it was necessary but you can always update it first and try with the current usb hub!
where and how can i download the firmware for my 2017 cx 5 . right now i got 59.00.504 and i need atleast the version of 70 something
@DittyPitty1
11 ай бұрын
I have a link in the description to a google drive folder and it has the firmware. Download it on a flash drive and then follow the steps in the video. Good luck!
What about steps 7-10? The installing the fail safe? Did you not do this? You don’t have to? If I have OS 55 does that mean if I install the 74.00.32 update that you have on google drive then it’ll work, even without installing the fail safe?
@DittyPitty1
2 ай бұрын
If you’re located in North America and your firmware is 55.00.650 or above then you can upload the firmware that is in the google drive. I personally skipped steps 7-10 but you can do them if you’d like for ease of mind.
Any idea where I could find the files to update to version 55? Trying to the update to 70 but my 2015 mazda is at 30
@DittyPitty1
4 ай бұрын
I found my update by asking around in some mazda3 forums. There’s one called mazda3revolution you can try.
Can I ask, If someone were to replace the radio with a new one, (like a Kenwood, etc), I take it you'd lose all kinds of functionality for the vehicle itself?
@DittyPitty1
7 ай бұрын
Yes I’m pretty sure you would lose some functionality. I use the maintenance menu on the stock infotainment for my oil change and tire rotation and that’s why I opted to keep the stock setup. I believe there is a way to install a larger screen but keep the stock software so you don’t lose functionality.
I already swapped out the usb hub in my '16 mazda3 MT. It wasn't until afterwards i figured out i needed to update the firmware. Do I need to swap the OEM hub back in or can I use the carplay hub to install the update? Super easy to remove that whole usb hub trim panel from the whole car and then remove the hub the right way if you have a Manual Trans! cannot speak for the auto
@DittyPitty1
9 ай бұрын
You can use that USB hub to update the firmware. I’ll have to look into finding an easier way to remove that hub. I’m sure it’s a very similar set up to the auto trans. Thanks for the info!
@JDuBz815
9 ай бұрын
@@DittyPitty1 Thanks! the trim removal is probly the same aside from removing the shifter. With the MT, just unscrew the shift knob and that trim panel/shift boot slips up and out easily. The auto is likely a bit more complicated to get the panel over the knob/remove the knob
Do u have step by step how to dissemble the center console and armrest part?
@DittyPitty1
10 ай бұрын
Sorry man I don’t. Is your USB hub in the center console?
quick question! I didn't get the usb part does the usb have to be a fat 32 or does the format you download the file have to be fat32 sorry I'm kinda slow.
@DittyPitty1
5 ай бұрын
USB has to be formatted as FAT32
I’m currently doing it. I’m at 97%. It’s been 23 minutes
@kamaulhutton93
4 ай бұрын
It’s completed. Big ups bro
Just bought a used mazda 3 2014 today and realized it doesn’t have carplay. Gonna try this out soon
@alrightythen888
Ай бұрын
And what happened?
I have a 2018 Mazda 3 gt in canada but the thing that you drilled out is in my storage box in the middle instead, if I remove it and do the same process is it going to work?
@DittyPitty1
11 ай бұрын
Yes! That location is the best in my opinion cause it’s super easy to replace and the lightning cable is hidden in the box. All you need to do is take out the cup holders and that exposes the tabs that hold the USB hub in place. Push in the tabs in allowing you to remove the usb hub and unplug the wires. Plug the wires in the new usb hub and clip it back in place. Put the cup holders in and it’s done! You don’t have to screw around with drilling out the tabs in that location. Good luck!
@cwclarkephotos9551
11 ай бұрын
Mine is a 2015 gt and mine is in the console as well.
I formatted the usb stick, but my hub will not read it in either port. Any advice? 2018 mazda 3 hatchback.
@DittyPitty1
9 ай бұрын
I believe Mazda is only compatible with FAT32 and FAT16 USB sticks. I hope this helps!
@lostincontext8219
7 ай бұрын
Follow-up question, I have the new USB hub installed before the update. Is that why I can't get it to work? If so, do you have a suggestion for me? I really appreciate it. Thanks man!
Good guide. DTC means Diagnostic Trouble Code, btw.
@DittyPitty1
2 ай бұрын
Thank you!
Do you know if the firmware update works in a Mazda 3 2016? my current OS Version is 55.00.750 NA N
@DittyPitty1
4 ай бұрын
Yes that will work!
Can I follow the same instructions for a 2016 Mazda 6 Touring??? Has anyone done that ?
@DittyPitty1
3 ай бұрын
You sure can
Hi Dittypitty, do you have any idea why my reinstallation package keeps failing? after i get to the part where its preparing the process i end up with "Validation Failed - Failed to validate the package certificate." Im assuming the file is corrupted but i redownloaded the file 3x now and getting the same result. UPDATE: Downloaded it for the 4th time, but this time i verified the CMU150 file by using the MD5_and_Sha (you dont need this in your USB stick). I dont know if this is the reason why it worked or that the 4th download was the charm, but whatever the update worked. Thanks for the help Dittypitty.
@DittyPitty1
2 ай бұрын
I’m glad everything worked out for you!
what years does the mazda needs to be as minimum, mine the usb stuff is in the center and where usb stuff is, there's a CD Drive, mazda 3 2015
@DittyPitty1
6 ай бұрын
As long as your infotainment is above 55 firmware you should be in the clear
@edson_3592
6 ай бұрын
did u ever find out bro mine also has cd player and the usb plugs in the center console ?
What’s the main difference between OEM and compatible? If it’s noticeable id like to get the oem if not, I’ll just cheap out.
@DittyPitty1
11 ай бұрын
I've read some reviews saying the cheaper ones crash out of apple car play sometimes based on a few reviews on amazon. But I will admit that my apple car play has crashed a few times along with google maps not functioning properly. Based on my experience they're probably the same USB hub one is just sold cheaper.
@jamesspurlock8864
11 ай бұрын
@@DittyPitty1 awesome, with that info I think I’ll go with the Amazon one, I do appreciate the reply and the video very helpful!
About to try on my old scion ia . I have 55.00.753 NA firmware. Wish me luck 🤞🤞🤞
@tyletrs
6 ай бұрын
Did it work for u buddy
@greeneyez15o
6 ай бұрын
@@tyletrs YES !
Currently at version 51.00.300. Do you know where I can source version 55 so I can then do version 74?
@DittyPitty1
3 ай бұрын
You can visit a forum called mazda3revolution.com and some folks on the forum can help you acquire the download needed. There will also be some posts about what you need to do on the forum.
Hey DittyPitty, I have a FAT32 64Gb USB drive. Should I not use it for the firmware update, is it required to use a 16GB?
@DittyPitty1
3 ай бұрын
I’m not too sure tbh but it’s suggested you use no more than 16gb
How about the original cable? You remove or just leave it as spare in future incase need to rollback?
@DittyPitty1
2 ай бұрын
I took the old cable out and used the new ones. I did keep the old cable but there will most likely never be an issue where you’ll need it.
My mazda connect screen is not a touch screen i think do you know if a touch screen is neccesery ?
@DittyPitty1
9 ай бұрын
Touch screen is not necessary
its 2023 and I cant find a usb in the house that is less than 32GB -___- excellent video though thank you!
Thanks for the video it works. The only problem is that the import of my contacts no longer works. Yet I disconnected the Bluetooth on the phone and the car and when I reconnected it works except that the import of contacts fails. What can I do ?
@exaucenshole5407
Жыл бұрын
I restart the car and my phone too
@DittyPitty1
Жыл бұрын
Try deleting your phone from the infotainment and do the same on your phone and then reconnect them. Another thing that kept giving me trouble in general was the navigation chip that came with my car. As soon as I took the chip out of the SD slot the infotainment quit restarting and sped up a lot so maybe it’s causing trouble in that area as well. You can also try updating your phone to see if that works. Sorry I don’t have a silver bullet for your situation. Best of luck!
I may attempt this lol looking to buy a Mazda soon and need CarPlay lol I’m getting a GT 2017 do you think it’ll be fine??
@DittyPitty1
11 ай бұрын
Yea it’ll work! Your USB hub may be in the center console which is a lot easier to swap out for the new USB hub. If the hub is in the same location as mine then it’s a bit harder.
HELP.... I have no idea what to download to my USB drive nor how to do it. I clicked on the link and saw the 5 files but I'm just completely lost.
@jovinp3069
8 күн бұрын
Idk if you still need it but you just download the one big file onto the drive. It should be 950 mb. Don’t worry abt the other files
To do this will I need the SD card for navigation? My car did not come with one
@DittyPitty1
9 ай бұрын
No SD card is needed. It’s suggested that if you have one you actually remove it. Good luck!
@BradenDavey
9 ай бұрын
Thank you!
I installed mines, but nothing changed after I plugged in my iPhone
@DittyPitty1
Жыл бұрын
Did you check to make sure your firmware is above v70.00.xx? You can check this by going to settings->system->about->version info. If it is above version 70 then make sure your USB hub accepts Apple car play and all the wires are plugged in well. Another thing to check is the quality of the charger for your phone. I had a cheap junky charger and bought a thicker higher quality charger and that helped prevent Apple CarPlay from crashing all the time. Hope this helps!
If im on version 31, is there somewhere to get to version 55?
@DittyPitty1
6 ай бұрын
Yes, there are other tutorials that will show you how to update your firmware to 55 and there should be downloads in the description. There are also forum posts where you can get the necessary downloads and they talk about how they upgraded their firmware.
I have version 70 on My 2018 Mazda 3. If I understood you correctly, you can do this with the version 70. You don't have to update to 74 correct?
@DittyPitty1
9 ай бұрын
Yes sir if you have v70 then you don’t have to update your firmware. All you need to do is swap out the usb hub that support Apple car play/ android auto and it’ll work!
@fruehauf01
9 ай бұрын
So once I swap it out for the new USB hub. I will see Android auto and car play pop-up on my screen correct?
@DittyPitty1
9 ай бұрын
Yes. If your firmware is v70 or above just swap out the usb hub for one that supports Apple car play then plug your phone in the usb port and Apple car play should come up on its own. You might have to unlock your iPhone first. Same idea for an android phone as well.
Does the Apple CarPlay hub that you linked in the description only work with a wired connection or is it also wireless?
@DittyPitty1
Ай бұрын
It is wired only. There is a usb be huh that supports wireless but it’s only wireless.
@touringrc5007
Ай бұрын
Oh ok, thanks. Do you know if you can disable the system from charging the phone? Also, do you have any issues with it disconnecting randomly or it being very laggy and whatnot?
Do you know how to fix the reboot loop problem?
@DittyPitty1
8 ай бұрын
I had that same issue and removing the navigation chip solved the issue.
what if my version is below 55.00.650?
@DittyPitty1
11 ай бұрын
You’ll die. Jk. If you try to update your firmware to 70.xx.xxx with a current version below 55.00.650 then you’ll end up bricking the infotainment system making it completely useless and you’ll have to buy another. If your firmware is below 55.00.650 then update it to 55.00.650. Then you’ll be able to update it to 70.xx.xxx. If you can’t find version 55.00.650 exactly then one that’s above it will work. Like 59.00.540 or around there. Hopefully that didn’t confuse you more haha. Always do more research on your own though!
Thank you for a great tutorial! I have a question. In your OEM link, does that KIT include both the USB Hub and the necessary cables, or just either of those? Thanks!
@DittyPitty1
2 ай бұрын
It includes the hub and cables as well
Hi, Thank you for your video. Does this work on my Mazda 2 2019 as well? Also, does your firmware work in my region? My OS version is 59.00.540 4A N. I just wanna make sure. Thank you for responding! :)
@DittyPitty1
6 ай бұрын
The process would be very similar on your 2019 but the firmware I have will not work for your region. The firmware I have is only for North American Mazdas. Sorry homie
@redpoutyChannel
6 ай бұрын
@@DittyPitty1 Thank you for responding! I appreciate that. Subscribed!
Great video! Does it also work wireless?
@DittyPitty1
3 ай бұрын
This one does not but you can get a usb hub that supports wireless. Or you can get a wireless adapter.
So the cabling on the new and the old one is not the same?
@DittyPitty1
9 ай бұрын
The only difference between the two is the additional two wire that go from the head unit to the new usb hub.
@aleksandaraleksic4067
9 ай бұрын
@@DittyPitty1 Thanks! Is there a Bluetooth option? I saw some dongle online.
@DittyPitty1
9 ай бұрын
@@aleksandaraleksic4067 Yea there is a bluetooth dongle you can buy that you plug into the usb port. There's also a usb hub that supports wireless applecarplay. I believe its called Mazda-TK78-66-9u0c-Android 11. I haven't done a lot of research about it but i think it only supports wireless carplay. Not wired. Hope this helps.
@aleksandaraleksic4067
9 ай бұрын
@@DittyPitty1 I'll definitely look that one up. I need only wireless and occasionally for navigation. Cheers!
Am i safe going to 74 from 55.00.750? I know you said 55 was good, i just want to make sure so I don't break it.
@DittyPitty1
6 ай бұрын
That should be good! I believe that’s what software mine was but it’s best to look at some other forums to double check to see if you’re in the clear. Good luck!
@dominicmurray7200
5 ай бұрын
Any update? Did everything go smoothly? I’m in the same situation lol
why it needs 16g flush drive 32 will not do ??
@DittyPitty1
5 ай бұрын
I can’t tell you the specifics but everyone suggests to only use 16gb.
@ZeusKyriacos
5 ай бұрын
@@DittyPitty1 The link you have provided includes firmware for NA North America do you have EU version ?
@DittyPitty1
5 ай бұрын
@@ZeusKyriacos nah sorry man only got the firmware for yanks
Do u need the sd card from map to work
@DittyPitty1
6 ай бұрын
No sir. It’s recommended to remove it completely for the install.
Do you happen to have the failsafe file?
@DittyPitty1
9 ай бұрын
Nah sorry man I don’t
@Library_Hunter
6 ай бұрын
Hi! I think I saw in your video that the screen shows "failsafe" option. I thought it was required to have a failsafe file in the flashdrive. Or maybe it was automatically installed from the .up file?@@DittyPitty1
@Library_Hunter
6 ай бұрын
Timestamp 4:39
Step 7 requires a fail safe file? Which one is that?
@DittyPitty1
5 ай бұрын
Tbh I ignored that step
@Tkmcglinn
4 ай бұрын
Thanks.
Hi DittyPitty. Thanks for the great video! I have downloaded the file but I don't have the USB hub yet. Can I do it in stages? (Just update the software for now) or should I wait until I get the USB hub? Basically, does everything besides AA & CP work as normal until I get the USB hub?
@DittyPitty1
4 ай бұрын
Thank you! You can update your software and have everything work as normal without needing the usb hub. Once you install the hub that’s when car play will be available. Cheers!
@rajmodi5669
4 ай бұрын
@@DittyPitty1 Wow, thanks for the fast reply!! I'll give it a shot. But first, gotta find a thumb drive that's only 16GB or less!! Gotta be one in one of my old boxes of crap! 🙂
@rajmodi5669
4 ай бұрын
Ok, software update went super smooth! Went from 55.00.753 straight to version 74.00.324a (in case anyone is in the same boat) without a hitch. So far, no changes to speak that I can see, so next step is to get the USB upgrade. Oh and did confirm the version number is correct after upgrade. Thanks!
Does it freeze or anything or is it smooth with that hardware?
@DittyPitty1
24 күн бұрын
I’ve had a handful of instances of it crashing but that could be due to me never updating my phone
Will the firmware work here in the UK?
@DittyPitty1
5 ай бұрын
No it only works for the yanks🇺🇸
Stupid question......Should i uninstall MZD AllInOneTweaks before hand and factory reset ? Or will the install do all that fun stuff Thanks in advance 👍👍
@DittyPitty1
9 ай бұрын
That’s a good question. I’m not too sure tbh but I’d uninstall it just to be safe. Don’t wanna brick the CMU!
Does it waze?
@DittyPitty1
Ай бұрын
I think so?
@aznmode1
Ай бұрын
@DittyPitty1 I installed something similar and waze is not available to add in the app selection on the android auto app setting on my phone.
is it wireless?
@DittyPitty1
4 ай бұрын
Nah the phone has to be plugged in by usb with the one I got. You can get a wireless usb hub but it’s only wireless. Not wired.
Hi guys, Please can someone tell me if your phone automatically links with Bluetooth or does a phone have to be plugged in at all times?
@DittyPitty1
6 ай бұрын
Phone has to be plugged in at all times for Apple CarPlay to function.
Not worth it because still it's wired ,,, why not wireless
@alrightythen888
Ай бұрын
Too much interference with BT. But most importantly, this is not a simple process. Uploader lost me after he removed the console. And the updating the firmware? To quote your favorite work AI, that's a major challenge for the most tech savvy people.