Love seeing what my piers carry, thanks for sharing sir !

Hey Gary, IBEW inside wireman here. Subscribed because you seem like a nice guy, and seems like you’re a tool guy like me ! Lol

I like your tools and totes it looks like you have everything you need. I really like the fact that you’re not overloaded. It took me a long time to organize and minimize my tool bags 💼 and carry just what I needed. Man you also have some name brand high quality tools, even before you mentioned how long you’ve been in the field I could tell you knew your stuff. Great video as always KINGSPORT take care.

Trust me that Klein $29 level is worth it. Empire $10 cheap copy ones the magnets suck. That Klein level magnet is so strong. Well worth it.

Sounds like you are working with the best tools you have ever used. Years of fine tuning obviously.

Nice set of tools, always intrigues me about what other electricians carry for their work, especially in other countries. Cheers for the video.

Your speaking truth regarding those Measuring Tapes my friend. I will loose one in my own kitchen, I swear. I have not been using wire-strippers for many years to build the kind of "muscle memory" you have, but I really love my Milwaukee Combination Electricians 6-in-1 Wire Strippers Pliers. They are not priced to high now, but they use to be 50 bucks. I found them in a Pawn Shop for 10-USD! It really reminds me of the “Vamplier’s” feel when it comes to holding needle noses. I have a Knipex “Pliers Wrench” and a “Knipex Cobra Water Pump Plier” set that I have been using for a few years now. Pricey… But essential to my workflow. Everything else in my back is the lesser price tier stuff.

Loves your set up Sir 👍they're all legendary tools

I've had Klein wire strippers for about 20 years. Still the best I've used.

I’ve got that craftsman ratchet, it stays in my mechanics box because I’m afraid of losing it ! Lol

Great tool setup

I honestly use my Klein electricians scissors every day as an electrician.They’re great. I’ve even cut a 14/2 cable with them. And they didn’t even get a knick in them

I agree I like standalone screwdrivers as well, Just a suggestion looks like some 3 in one oil would do some good on those cable cutters, cleaning off that rust, throw a little in the joint on your linesman pliers too, They will open and close like brand new! I enjoy the content, just subscribed.👍

very well done.

Nice tools. Love Knipex! And... You need 1 more thing in your bag, a box of Kleenex, to blow your nose.

Agree with you that Cle-Line and Greenlee are the best drill bits.

Hey Gary a little metal polish will do wonders o that cable cutters, just cause it’s old ain’t no reason to replace them !

I Like the form fitting handle on that adjustable wrench, I've never seen one like that before

@uofscifi9166

4 жыл бұрын

That got my attention too

I've owned tapes until they fallen apart. I have not once lost a tape, because I use it so frequently. If you're going through 4 tapes a year then maybe you should invest in an expensive tape you might remember, not to leave in a hole. I lose 11 in 1s and those damn yellow handled kleins. never the blue ones, just the yellow. LOL the end of the dewalt hacksaw is the same as on the Klein hacksaw, greenlees too I believe,

@andrewsalazar98

3 жыл бұрын

I can’t stand the end of that Dewalt hacksaw. My back was sore for a few days after trying to open and close the damn thing.

Love me some Estwing Hammers. Titan also makes a good bit ratchet. What is a Punchdown Tool?

Hey I have a truck driving cousin that lives in Kingsport by the last name of Barker !

Channellock makes a damn good set of linemans pliers.... id definitely say that rival kleins

War Eagle!

I dunno what size conduit you cut, but try a Milwaukee M12 hackzall. it'll vibrate more, but blade changes are much faster.

Anyone know what pouch he was using by chance?

@kingsporttoolreview8703

2 жыл бұрын

An old school Sears Craftsman Pouch

Where did you get your tool belt from

@kingsporttoolreview8703

4 жыл бұрын

My pouch is a Craftsman from Sears (it's about 15 years old), My belt is a nylon AWP belt that bought at Lowe's,

@chatt_chase8057

4 жыл бұрын

That is a quality tool pouch, it’s a shame you can’t buy those anymore, VETO Makes an awesome line of tech bags and tool pouches, very good quality!

I live in Lenoir City tn

Hey I'm in Kingsport also and currently looking for a job as a helper or apprenticeship. I've tested and interviewed with the IBEW but due to covid they're only doing a small class of 5 people I'm on the list at #12 so I didn't make the cut. Do you know of anyone else that would give me a chance? I just graduated from Northeast State.

@kingsporttoolreview8703

3 жыл бұрын

Be forewarned that if you Join the IBEW that you will NEVER work locally in the Tri-Cities. Even if after you leave the IBEW, the local companies WILL NOT hire you with IBEW on your resume. . . . . . . . . . Steve Huff is hiring (yes, that's a plumbing company, but it will get you foot in the door). Acorn Electric is always hiring but their pay is low. Massey Electric is always hiring too (but be warned Massey always operates understaffed and works their guys 7 days a week, sometimes their guys go 2 and 3 months without a day off -which is reason why they can't keep anyone (hence the reason they're always hiring) BST is one of the better companies, (I've worked for them twice) but they do all of their hiring through a Temp Job Agency. Unfortunately, you'll work for little more than Minimum wage for 90 days during your time with the temp job agency. After 90 days BST decides if they want to hire you. If they hire you, then you'll get a raise. (as long as you show up for work everyday, and don't be late, don't leave early, and do what you're told during those 90 days, they will hire you Kingsport Armature & Electric is another good company, but they will take on a big job and hire several people at once to do that job and as soon as that job is done, they will lay them off K&S Communications is always hiring too, they contract for Charter Cable and don't work regular hours. Really bizarre hours. Like you'll do a cable install at 9am and then your next cable install appointment is at 3pm and you don't get paid for your down time (hence the reason they're always hiring) 4 really good companies in the Tri-Cities to work for Tennessee Electric Johnson Controls TeleOptics Fleenor Security

@brandonjarnagin6436

3 жыл бұрын

@@kingsporttoolreview8703 thanks for the information I really appreciate it.

@johnd9357

3 жыл бұрын

@@kingsporttoolreview8703 amazing that in the trade world, the bar for being a good employee is showing up to work, and working your set hours. It never ceases to amaze me that so many people find this incredibly hard to do. You can go really far in the trades it seems if you just simply CARE about what you’re doing.

Great video man but how come you dont cary you meter with you daily?

@kingsporttoolreview8703

4 жыл бұрын

I do, but at the same time, I am an Industrial/Commercial electrician, sometimes I can go for weeks on end and do nothing except running conduit, and other times I can spend several days doing nothing but wiring terminal blocks or PLC Cabinets. I also do a lot of DataComm installations (RG45 phone wire and Cat5/Cat6 computer wire, and coax cable) .... So, in other words I really don't need a multimeter everyday. . . . . the main thing I use a multimeter for is 3 phase electric motor hook ups (a multimeter will let me know if the leads are hooked up to spin the motor in the right direction), I also use multimeter if there is a short and I need to isolate where the short is.

@kingsporttoolreview8703

4 жыл бұрын

Another too, this is really just my main tools, we park our work vans at the shop at the end of our shift (unless we're working out of town), and I really didn't want my bossman to see me getting all of my person tools out of the van at the End of my shift or he'll think I am doing side work (MOONLIGHTING) or even worse, he might think I was not coming back (Quitting)- LOL

I am trying to get a electrical job I go to north east state do you have any recommendations

@colinwatts3449

3 жыл бұрын

IBEW

@4239560576

3 жыл бұрын

@@colinwatts3449 what is that

@kingsporttoolreview8703

3 жыл бұрын

Steve Huff is hiring (yes, that's a plumbing company, but it will get you foot in the door). Acorn Electric is always hiring but their pay is low. Massey Electric is always hiring too (but be warned Massey always operates understaffed and works their guys 7 days a week, sometimes their guys go 2 and 3 months without a day off -which is reason why they can't keep anyone (hence the reason they're always hiring) BST is one of the better companies, (I've worked for them twice) but they do all of their hiring through a Temp Job Agency. Unfortunately, you'll work for little more than Minimum wage for 90 days during your time with the temp job agency. After 90 days BST decides if they want to hire you. If they hire you, then you'll get a raise. (as long as you show up for work everyday, and don't be late, don't leave early, and do what you're told during those 90 days, they will hire you Kingsport Armature & Electric is another good company, but they will take on a big job and hire several people at once to do that job and as soon as that job is done, they will lay them off K&S Communications is always hiring too, they contract for Charter Cable and don't work regular hours. Really bizarre hours. Like you'll do a cable install at 9am and then your next cable install appointment is at 3pm and you don't get paid for your down time (hence the reason they're always hiring) 4 really good companies in the Tri-Cities to work for Tennessee Electric Johnson Controls TeleOptics Fleenor Security

@colinwatts3449

3 жыл бұрын

@@4239560576 International Brotherhood of Electrical Workers.

Why electricians in the USA use screwdrivers without insulation? A lot of them use these yellow Klein Tools (I know there are good) ones that do not have insulation. In Europe, most of the electricians use screwdrivers with insulation as they are Wiha, Wera, Knipex...?

@johnd9357

3 жыл бұрын

Some do. We mostly just denergize and work on things that way. But insulated tools are becoming more and more common.

@miki4758

3 жыл бұрын

@@johnd9357 Every electrician denergize and work, but in our job, there is always danger and that is why it is good to have insulated screwdrivers

@wizard3z868

3 жыл бұрын

cause we muricans are MEN not fannies we fear not what we cant see or smell but occasionally get to touch and taste lol cheers mate ( have em but never seem to use them i find myself just using tape in a pinch around my shafts)

@thatfoojosh

10 ай бұрын

If we need insulated drivers we just use our electrical tape. 😅

You have a drill and impact

I am not a fan of multi bit drivers either

You sound like you did a 8-ball

Sorry man, but data com is not electricians

@kingsporttoolreview8703

3 жыл бұрын

in my world it is, we have to do it. . . . I don't see Iron Workers and pipe fitters doing it.

@justinogle150

3 жыл бұрын

if low volt is something we learn in our apprenticeships why wouldn't it be