Did I just watch 48 minutes of a car part install, on a car I dont own, with a part I'll never buy? Yes. Yes I did. Because it's just that good

@Zerogivengarage

6 жыл бұрын

Best compliment ever :) . thanks

@richardcroll3

6 жыл бұрын

I watched it and im planning a turbo install

@BenjaminHall

6 жыл бұрын

#METOO

@KingWill454

4 жыл бұрын

Lol I'm right there with you

@gtaclxpsu5032

2 жыл бұрын

You could learn some things lol

41 dislikes are from divorced wifes that never imagined their ex-husbands would leave them for a blower.

@mogulme6190

3 жыл бұрын

😂😂😂

@JordanSVT

2 жыл бұрын

"I promise, the car needs the Whipple in order to run. The car won't start without it."

@imadog131

2 жыл бұрын

A real blower….🙈

@duanepierson4375

Жыл бұрын

Fuel Injection is nice, But I want to be blown.

@chrisstephenson8311

Жыл бұрын

Or get blown everyday😝👍🏻

damn, that snare sounds good in that background music.

anyone notice the guy get dinked in the glasses by the tire well cover at 19:00

@-BabyJoey-

4 жыл бұрын

That is the exact reason I came to the comments section.

@larrybroad8746

3 жыл бұрын

like i said alot of work. very glad i got a 2013 mustang GT but whatever.

@ryanbaker7404

3 жыл бұрын

Indeed. That's my life most days, lol.

I do IT work for a living, which some might consider "complex," but compared to what you guys are doing here, my job is like playing with Lincoln Logs. You manage to marry art and science inside a space that barely allows your hands/fingers to fit, and you make it look easy. I'd be lost after removing the first bolt, asking myself, "now where did that go?"

@CrewExpendable2007

4 ай бұрын

As a software engineer, I completely agree.

I love watching all install videos, even though I don’t have a 3V or a V8 for that matter. Great detail!! I can’t believe how much more goes into a twin screw install than a ProCharger. Wow.

Nice video really like the super detailed install vids

Bill is the best! Such a knowledgeable guy

Buying a very slightly used engine with this supercharger already installed, should be all easy as an engine swap. Little nervous about the rigging of the electronics and hoses but we’ll figure her out. Thank you.

Thanks, I have a GT 4.6 /w 5 speed and want it to have a more HP then factory. Great video and very clear on the instructions.

@cjponyparts

3 жыл бұрын

Glad it helped!

I have a gt 2006, I will never get a super charger, but that work was AWESOME you guys, great job

@cjponyparts

Жыл бұрын

Thanks! 👍

This kit on the 2005-2009 Mustang GT's makes around the same power as a tuned N/A 2015-2017 Mustang GT. Ford continues to make huge progress on these engines. I can't wait to see what the 2018 Mustangs has to offer!

@MJMDrawings

6 жыл бұрын

sirnate54 700hp stock! is the rumor

@garibay711cod

6 жыл бұрын

A tuned N/A 2015-2017 5.0 makes 430 At the Flywheel,This supercharger brings the 3v to a 475 at the Flywheel.So it’s actually more power.

@Spiritcr1jsher

5 жыл бұрын

@@garibay711cod they make 435hp fly wheel stock . With bolt ons or a stock bullit the hp number is around 480hp.....

@filipnine

5 жыл бұрын

@@Spiritcr1jsher low 500s with a tune as well

@Spiritcr1jsher

5 жыл бұрын

@@filipnine yeah, I've seen some sick builds

I don't even own a S197 , I do own a DHG '01 Bullitt...and I still watched almost all the CJ's vids ...very well done and clean vids. Added bonus that your not always trying to sell house brand parts like the other Mustang channels .

@Zerogivengarage

6 жыл бұрын

thanks for the compliment!

I have a 2005 Stage 1 Roush that's very fast. This video shed some light on my 1139 out of 1725 authentic Roush. Great video!

@kevinduarte3755

8 ай бұрын

Where do I find the intake supercharge for the 4.6L 3v

YAYYY,,finally ... Amazing video. I have been wishing for one DETAILED such as this since this is my next mod. I would say though, the ONLY part that gives me the willies (and wish Roush would address) is the wiring. All this detail and they cant do connectors that go on the existing junctions to split out what you need? Seriously...but besides that..BILL...Thank you

@Zerogivengarage

6 жыл бұрын

Yea it can be a little intimidating buy it's not really that bad. Things just have to be moved since the throttle body does and the IAT has to be separated.

I could buy an 05-09 and this supercharger for probabbly a bit less than half the price of a same-generation gt500 and make near enough to the same power. SOLD!

I still remember the time when you could buy a good supercharger kit for around 1,000 to 1,500. Direct Nitrous Oxide Kits for 400. Times have changed. But despite all excellent video and a very professional installation. ✌

@cjponyparts

4 жыл бұрын

I definitely don’t remember $1000 Superchargers but my first Nitrous Kit was $300 lol

I lack a good garage space or extensive tool box to work with. Are there mainstream shops that can install a kit like this for me, or do I need to find a friend instead?

Just bought an 08 GT hoping I can find a roush supercharger so I can install this on my car

Wish Department of Boost weren’t the only ones still making twin screw kits for the 4.6 3V!

Great video. I own a 05 gt 5 speed and would love a set up like this. Should do a saleen set up vid also. Supercharge over turbo anyday.

Hay brining that too my house lol I'll get this one day saving up for it

@orlandoblanco9186

3 жыл бұрын

Factzzzz 💯

Kenne bell hands down. Thats what im planning this year.

Wow would love to do that to my mustang

How different is the Whipple supercharger kit for the Shelby GT350 to install?

Thanks

Me, watching supercharger install videos knowing damn well i i dont got the money laying around for that 😭💀

All that time and never got to see someone “have some fun” with it???

Is a upgraded fuel pump needed for this supercharger? I did not hear any mention of a fuel pump ??

I assume if you already have a tuner you can have someone like Lito make a tune prior to getting the supercharger i say this cause it seems like a hassel to send it to them when Lito can do it for a bit more and it's mobile

Nice kit! Great video! Nice to see some 3 valve love...LOL (Coyote stole the show). Not for the novice and I think a weekend would be better to schedule for this install rather than 10 hours or so. Too bad you couldn't do some "boosted pulls" so we could hear "the sound"... :-(

@Zerogivengarage

6 жыл бұрын

With the 87 octane in the tank I couldn't risk it.

@RobertKohut

6 жыл бұрын

Yup!

@bad3vlv672

6 жыл бұрын

Im about to tackle the r2300 phase 2 kit on my 05 Gt in a few weeks. This video will probably come in handy. Wish me luck.lol

What would labor in-general ball park figure be for something like this??

Do computer programming on sct x4 device instead of Roush programming ? Or i have to take the access from Roush ?

Would the supercharger fit on my 2006 lincoln town car 4.6 2v v8

what would the gas consumption be???

is there any differences, between manual and automatic installation?

@Mcgrawjp

3 жыл бұрын

raimondas boreiko the manual is lighter by 500 pounds I think

Can it be done witj an automatic

2.3l roush .. What hp will it make by going with a pulley down. If you know the dyno of each pulley down in diameter I'd appreciate it. Thanks By the way. I have a 900 hp rated racing engine. 5.0 stroker . All forged.

Does Roush have a supercharger kit for the mustang GT with the automatic transmission Awesome video bill.

@jito8019

6 жыл бұрын

In case you don't have an answer yet, this kit will work with an auto. The only reason they say it won't, is because the supplied tune is meant for a manual. The kit will still bolt right up, only difference is that you'll have to get a custom tune (which is better anyway).

@randymatthews3889

5 жыл бұрын

Brenspeed has a kit that comes tuned for auto.

Why doesn’t this kit work on my 2010? What are the differences?

DAT 4K

If I ha e a 1996 mustang gt can I put it on

does that fit under the stock hood though? or do I need a cowl hood? I have my eye on a particular aftermarket hood so if this kit fits under the stock one, it will fit under the one I'm looking at

@cjponyparts

4 жыл бұрын

Monster Conrad fits under a stock hood

@MonsterConrad

4 жыл бұрын

@@cjponyparts I've never had a reply so immediate before XD Thank you! Now I can get my fiberglass hood without stress

What thermostat do you have for this engine

I'm considering a mustang either a 2v gt manual convertible or a 3v 05-10 4.6 manual convertible any thoughts. how big of a difference are the two.

@mrbob4u495

3 жыл бұрын

I love my 05 ragtop. Still hauls with 178K miles.

So the 2010 GT has the same 3v 4.6. Does this not fit it or did we just forget to mention that year. Common mistake just wanting to know.

@87handmedown

3 жыл бұрын

Roush makes a kit for the 2010 GT that uses 90-95% of the same parts. However, there are some that differences between the two kits that necessitated a separate kit for the 2010's. A few big items are: different heat exchanger, different coolant tank, different I/C pump mounting, and a different air intake/filter box. I know because I'm installing an 05-09 kit on my 2010 GT right now and am having to 'hot rod' a few things.

@danielkohler3458

3 жыл бұрын

The irony. I think this IS a 2010 GT they're putting this kit on. 2006, 7 and 8 I know have the air intake coming off the passenger side. This is the driver's side, so I'm guessing it's 2010 or the 09's run that way too.

Why is this Roush kit so low on power compared to Department of boost kit with stock gt500 blower? Is it just conservative tune or the complete kit is less potent?

@4406bbldb

6 жыл бұрын

ppavlicic are the two engines the same long block?

@jito8019

6 жыл бұрын

That's just the conservative tune from Roush. Can easily make more power with a custom tune. It's a bigger blower than the M122. Also have to think about pulley sizes. I believe the IC on the DOB kit is a little better though.

I think I want a super charger for my 14 mustang GT sterling gray

So if U have an automatic transmission this won’t fit..???

Hmmm BUT do they make this kit for the mustang Gt with and auto trans ?

Can stock Manuel transmission handle this ? Or I’m I better off upgrading the trans

@bigc6825

3 жыл бұрын

450 torque is about the max the stock 5 speed tremec manual transmission can take. Look up brenspeed

I just bought a 2006 mustang gt Roush stage 2 and I cannot find a damn Roush Whipple or Super charger anywhere for my car. Is it obsolete now or something? I qrnt to the link and all they offer was edelbrock

Anyone else have Deep Purple's Perfect Strangers playing in their head now?

I can’t find this kit anymore

Have an 05 3v stroked out from 4.6 to 5.0L would that pose an issue if i wanted to install this or any supercharger for that matter

@cjponyparts

3 жыл бұрын

The install would be the same. As long as you don't have crazy compression it should make really good power with a custom tune.

same installation for an automatic?

Que tal! Reprogramaron computadora? O sólo fue el supercharged

@lilcholo2097

2 жыл бұрын

They will have to tune it for it to run properly

What is the difference between an automatic and manual transmission supercharger?

@cjponyparts

5 жыл бұрын

Art Geek tune support

So I guess the strut tower brace will no longer fit?

@cjponyparts

4 жыл бұрын

Correct there is not enough clearance.

what is the standard price to have this installed?

@-BabyJoey-

4 жыл бұрын

I can tell you that I am having a whipplecharger installed on my 2010 Mustang GT and have been quoted by my local speed shop (JBA Speed Shop in San Diego) at about $3,000 for the install and $150-$750 for the dyno tune. Not sure if that's good or not, it's the first quote I've got.

@djrickygaz

3 жыл бұрын

@@-BabyJoey- Yeah it sucks mechanics usually charge you about what You paid for the part for the labor it’s horrendous

looks like a ton of work dude !.

@cjponyparts

3 жыл бұрын

Yes but totally worth it for the horsepower!

What are the torque specs to put the supercharger back on the

Do they still sell this?

does this kit work on a mercury marauder or just the mustang because the marauder has a 3 valve too

@earnestbarnes9633

5 жыл бұрын

No it’s a 4 valve

@hake5017

5 жыл бұрын

Earnest Barnes I forgot I never really looked into the mercury marauder and I actually thought it had a 3 valve this whole time

I have 2010 GT Premium and mulling the idea of a supercharger, a mechanic gave me the heads up that increased air induction on such an older model could be issue? Any truth to that?

@Q-gf8vb

3 жыл бұрын

Needs forged internals and maybe a new trans

Was the car fighting you? lol

Which cooler Liquid do i usein the intercooler ..

@cjponyparts

5 жыл бұрын

Kent Lindström normal antifreeze

I wonder if it was all worth it? Seems to be a cheaper way than getting the Coyote

@cjponyparts

5 жыл бұрын

The owner of this car debated trading it in but loved the car and just wanted more power. He absolutely loves the Roushcharger!

Hey man will this work with stock internals for will those need to be upgraded before hand ?

@cjponyparts

2 жыл бұрын

It is designed for stock internals so no problems as long as the engine is healthy.

@marcmunoz8748

2 жыл бұрын

CJ Pony Parts also another thing I found that most performance part websites no longer carry this part and if roush is no longer supporting an older platform would I have to get a custom tune for this s/c kit ?

so does the bottom end handle upgrades like this

@cjponyparts

5 жыл бұрын

At the stock Roush power level they hold up very well.

2 weeks into install and I am 30 minutes in

If I have headers and cam about how much hp will I make with supercharger

@CG_Element

3 жыл бұрын

You’d probably make at least 40+ more horsepower than just the supercharger alone. But beware, the 3v motors are known for failing above 450 rear wheel torque.

You should do a install for a s197 whipple 4.0L and make over 1000 hp 😁

@AviateNorth

6 жыл бұрын

Eric Saalfeld that is a s197 2005 - 2014

So you cannot use 87 anymore if you put this on your mustang?

@cjponyparts

5 жыл бұрын

Edgar Taylor correct.

About how many hours

How i find the supercharger intake for sale

Did you have to tune it

some programming?

Would this not work on an automatic gt?

@cjponyparts

6 жыл бұрын

It will now, at the time of the video shoot there was no tuning support from Roush for the automatic.

Was thinking of doing it but that's something only you and God can install

what does stage 3 encompass? and can these handle a stage 3 cam from comp cam?

@CG_Element

3 жыл бұрын

I’m not an expert but the supercharger would probably work with any type of cam, just make sure you have the car properly tuned so the car runs good and gets the maximum amount of power. Also I hope you have forged internals, stage 3 probably pushes too much boost for the stock bottom end to handle

@WONDERBREAD89

3 жыл бұрын

@@CG_Element Thanks for your time and reply!!! I have a built rear end and trans but not the motor.. Thank again for the advice and time, cams will have to wait for forged internals.. Ima do kooks lth(myself & manual trans) and 410 gears this yr then and gunna need to save for a bit personally to have forged internals.. God Bless😎👊

can you install it for me.......

So if my gt is cammed can the supercharger still work??

@cjponyparts

3 жыл бұрын

Yes but you would need a custom tune.

@E30Tylerrr

3 жыл бұрын

@@cjponyparts sweet thank you

Y only a manual transmission ? Does it not work with auto

@cjponyparts

5 жыл бұрын

Kyle Taylor it can be used with an auto buy the Roush tune will not support it

Im trying to buy an 05 gt 4.6 3v wondering if they reliable or perhaps problematic

@mrbob4u495

3 жыл бұрын

Bought my 05 ragtop in 2013 with 99K. New top needed. Changed the alternator once. Just changed the spark plugs last month. That is it except for routine maintenance. Do oil changes every 3K without fail. Driven cross country about a half dozen times. Best MPG was 32 in Wyoming at 68 MPH. I know I am 5 months late, but if you are still looking, that is my take. BTW, just turned 178K miles. Still hauls.

@daveg9002

3 жыл бұрын

@@mrbob4u495 thanks i appreciate that i already purchased mine with 83k miles on it.

@mrbob4u495

3 жыл бұрын

@@daveg9002 Congratulations. If you are as lucky as I, you will have years of fun driving.

Unreal the new stock GT’s are making 460 HP

@tune1398

3 жыл бұрын

Right! 3v’s are garbage they don’t respond well to bolt ons.I own a 3v so I know.

How much for parts and labor????

@chugjug5617

4 жыл бұрын

frankg728 a well done job will set you back $7,000 - $10,000 depending on which supercharger you get and where you choose to get it installed

Are these reliable on a stock motor?

@cjponyparts

4 жыл бұрын

Yes they are very reliable at that power level

@thracian2072

4 жыл бұрын

@@cjponyparts I thought the conventional wisdom was that anything over 450 hp is too much for a non-forged internals motor.

Guess ROUSH no longer makes this for the 2006 Mustang?

@H3mif4v5r

2 жыл бұрын

Did u find out?

👍😁

Damn, giant tool box and no hose cutters?

@djrickygaz

3 жыл бұрын

It does contain plenty of lube though surprisingly

Nah I like the new edge more but the mustang Saleen s281e engine is wat I want soon watch

how much

@cjponyparts

4 жыл бұрын

There is a link in the description to our webpage with pricing.

475 to crank or wheel

@cjponyparts

5 жыл бұрын

Wade Slater crank

@cjponyparts

5 жыл бұрын

The Roush kits have proven very reliable and safe for a stock bottom end.

i want to get one of these for mine but I don't know who does them near me in mass

If I were to bring this job to a professional mechanic, what's this whole package going to cost me?

@urieldeltoro146

5 жыл бұрын

I saw comment that said it will be 1000 for the install in a shop

@djrickygaz

3 жыл бұрын

Besides an arm and a leg? Your left nut

6100$ is all im gonna say.

Looks like a bunch of rigging To mech cutting and splicing.

Dumb question...but where can one find the soundtrack for the video? Love the music in the background.

With the amount of time and money for this supercharger you could either 1. coyote swap this or 2. purchase an 11-14 car. I just don't see the money in doing this with a 3v when you could get roughly the same power out of a bolt on and tuned coyote. Not hating but just my opinion

@cjponyparts

4 жыл бұрын

Some people like the owner of this car have a lot of time and money invested in their 3V already and want to hang onto them.

@plazmamasta193

4 жыл бұрын

Coyote swapping is more money lmao unless you get a beat up one you can’t just simply install the engine and boom it’s done there’s far more work to be done

@87handmedown

3 жыл бұрын

Your peak hp and torque will be close to the same with a Coyote swap, but the total power under the curve will be much greater with a TVS supercharger like this vs a N/A Coyote.