COMPLETE 2018 Mustang GT Supercharger Install! | Roush 700 HP Phase 1 Kit
Автокөліктер мен көлік құралдары
🛠️ Download our free guide: The tools you need to work on your Mustang! bit.ly/465MGQT
Bill shows you how to install a Roush 700 Horsepower Phase 1 Supercharger Kit on your 2018-2022 5.0L Mustang.
610 lb-ft Torque
#FullInstall #HowTo #DIY #EasyInstall #S550 #StepByStep
Purchase Product Here:
www.cjponyparts.com/roush-sup...
Check out more Mustang 5.0L Supercharger parts from CJ's here:
www.cjponyparts.com/mustang-5...
Check out more Roush parts from CJ's here:
www.cjponyparts.com/roush/c/8...
Check out this step-by-step guide:
www.cjponyparts.com/resources...
Subscribe to CJ Pony Parts on KZread here:
kzread.info_c...
Music Provided By:
www.epidemicsound.com/
Пікірлер: 452
I’m a mechanic and even I was like nah I’d take it to a shop
@cjponyparts
5 жыл бұрын
Haha
@angel6635
3 жыл бұрын
You are the shop
@jamesb1856
3 жыл бұрын
I'm a mechanic too, I'd do it myself, but it does look like a pain in the cock. One word can fix it though, Odin. Better blower, more power, easier install.
@brent6109
3 жыл бұрын
@@jamesb1856 Maybe, looking at it on their site, you have no idea what it does or can do. Absolutely horrible description, it could just boost your car's AC for all it describes.
@jamesb1856
3 жыл бұрын
@@brent6109 the Odin is basically a vmp gen3 turned upside down. The put the intercooler on top because there isn't enough room in the valley for an effective traditional setup because of the direct injection on the 18+ cars. That's what makes it better than the roush. Google 18+ mustang and roush supercharger and you'll read all about the heat soak and high iat2 issues.
I just want to say that this is the fifth time I have watched this video. I probably will never get a supercharger for my '18 GT but a man can dream can't he? Keep up the good work Bill.
@ChuckTay23
Жыл бұрын
Facts. Literal facts.
@trewilliams8789
Жыл бұрын
You will get it put it in the universe
@Dalikis
9 ай бұрын
@@trewilliams8789^ worked For me 💯🙏🏼
@gimpfoot
Ай бұрын
I just bought a 2019 for 30k with a stage 2 roush supercharger on it. 750hp it’s pretty fast it’s the A10. It has 56k miles on it. Owned by a college girl. I love it going in next week for e85 tune. It made 638whp on 91
After watching this, I have so much more respect for video games car mechanics. They literally do all this at the push of a button
@oceanwaves83
3 жыл бұрын
Lol....
watched every single minute of this video and i don’t even have a 2018 gt
@jamesgunther8804
5 жыл бұрын
Lol same... 🤦♂️
@marceli7034
5 жыл бұрын
same 🤷🏼♂️
@brandengooch4101
5 жыл бұрын
Guilty... lol
@livinglife7042
5 жыл бұрын
Yep me too damm I want a new car
@issesandberg9673
5 жыл бұрын
I`m 13 and I look every single minute of this video
$7100 for 700hp is a great deal! Pulleys and a tune and you're tearing it up all day. Can't wait to see what the GT500 is going to do.
@Josh-hr5mc
Жыл бұрын
Back in 2003-2005 timeframe we could get an GT SC kit for $3K to 5K
@georgiafan6618
Жыл бұрын
@@Josh-hr5mc I paid $6100 installed for my SC kit on my ‘12 Tundra. Still runs good with tons of power.
Wow this guy installed this like he invented the system
@mrromantimothy
5 жыл бұрын
That's the way it should be it's a good thing to know but it's a better thing to know why
Bill :"... and your installation is finished. Be back on the road in no time!"
It's a very simple process. First, begin by completely disassembling the entire car...
Buying a 2020 Roush Stage 3. Watched this to get an idea of what the Roush mechanic had to do just for that TVS2650 supercharger. That's a lot of work! Impressive vid!
I've watched this video a couple of times and really respect the ability to do this work.
Send me 1 for free so I can do a test install to make sure your video instructions work.
I just completed this stage 2 750HP kit on my 2019 Mustang GT I took my time and double and triple checked my work and I must say it looks great and is a beast. A few things are different from this video but overall this helped me when I had a question.
A masterclass in fitment.. Absorbing to watch!
It does make the whole engine look pretty once installed! Real nice!
I always enjoy your videos brother, very informative and to the point... Thx bill
I would never do this myself for the following reasons: don’t have 1/4 of the tools needed, don’t have the patience, rather work overtime and pay someone to do it right for me. But man, what an amazing fuckin video. For those that like to do it themselves, there can’t be a better video. Great job!!!!
@StephenRiss
6 жыл бұрын
Thank you.
@livinglife7042
5 жыл бұрын
Ya he nailed it 👍
Wow, the racing red look really NICE on the new mustangs!
I don't even own a mustang yet but i love watching these videos. great content
Just ordered my '19 GT and I've already watched this video twice, can't wait.
@Christopher.dreamless
5 жыл бұрын
How'd it turn out?
@gamerdude19
5 жыл бұрын
Mine comes in at the beginning of August. Gonna break it in then put on the this kit. Pretty stoked.
Super satisfying install!
I love your neon HURST sign! My aunt Pat was the original Ms. Hurst back in the 60's!
You have skills man. Loved this video. Since it was a hour I watched it all day lol. Would come back to it while doing other things
Very nicely done, great video and instructions. Well done.
Craftsmanship! Very nice work 👍👍👍
Hell yeah brother..love it. I have to say this though, if I'm doing all that work to drill and tap a hole into aluminum I am damn sure going to install a heli-coil in the hole while I already have to put in that much work in the head. Heli-coil is much stronger than cast aluminum threads any day of the week.
Great video Bill , and congrats on the new power !
wow...that thing look gorgeous in the engine bay.
This video is different. You can hear it in his voice. He very excited! I would be too if I could buy a 2018 mustang and then at the same time put on a super charger😁
Super Video, Klasse Arbeit !!!
Very cool, CJ Pony Parts.
Great work brother you the best engineer 👍 God bless you 🙏 ❤🇴🇲
Great video bill !
Awesome video, very detailed!
Never worked on a ford before, but built a few ej25s and they got lots of connectors too...looks like fun😄
Great video Bill, makes the work day go by just a little faster.
very cool!..my wife want one her 2018 convertible GT now.
does anyone else notice this guys choice of watches to wear? my guy got style
Wow....you guys are amazing!!!
@Travios1115
6 жыл бұрын
Send me 1 for free so I can do a test install to make sure your video instructions work.
ITS THAT SIMPLE
@bradhoward7565
5 жыл бұрын
Right? Lol
pro vid guys. love it!
Great video. Nice work.
This needs to be my future
This dude could have been a heart surgeon.
Bro this install is intense hahaha, I could never pull this off own my own or with help 🤣. I will pay the coast of Labor proudly and give my mechanic a tip when he's done hahaha
Any other mods recommended after putting one of these on or is this good enough without having to change other stuff to handle the extra power? Any negatives to not having the strut tower brace on anymore?
Sick AF
I need this in my life :D
These guys are awesome They make heart surgery look easy Awesome video
Bill, doing this supercharger kit required a clutch replacement or 2018 mustang gt twin disc is capable of the hp and torque gain..thanks
My 2018 needs this ima do it
Excellent video as usual. Looking forward to you guys taking it to the strip,..I'm really curious what numbers this thing puts down.
I don’t normally like jack shaft drives but I think Magnuson is on to something if you want a full front feed but do not want to run inverted. To be fair to Roush his set up won’t be maxed out by most.
Just got my 18 GT and I'm looking for a blower. This one or the Whipple?
A full supercharger install video?! Wow, that's awesome! I'd love to see a full install on a big turbo kit for the EcoBoost or an e85 fuel rail kit!
@eyehateonions
6 жыл бұрын
Stephen Nicholson They did a full turbo kit install with the new Borla Turbo Kit for the EcoBoost Mustang.
the red 2018 looks awesome. I want one now
Well done CJ.....when do you have time to install mine? Lol 😂
well done Bill!
CJ Pony Parts can you do a 2019 GT350R Hellion twin turbo install?
could you use a Oil catch can for added protection since you are now adding pressure in the crank case? And would it work with this mod? where would you put in just wondering?
Ive been waiting for a good minute😂😂
The only issue with Roush is cooling... When the ambient temp outside is summer temps, you may get two pulls in before heat soaking happens. they do have the new max cooling package that will certainly help..
USEFUL....COOL VIDEO
Bill great job as always. I want that TQ wrench, do you have a part number from snap on?
All the elecronics make it a pain in the butt
Do you have a video about a whipple Supercharger installation?
Hey guys great video- is there a part for a billet oil cap cover or cap replacement? the ones Ive see are he caps directly sitting on the engine... thanks!
Can't wait the 19th of July galpin is installing this on my 2020 pp1 can't wait but I want a pro install with my warranty intact
What other upgrades would be required on an automatic without the PP? Or would it just well on a even on base gt without any add ons?
I've been waiting for this since they gave us a sneak peek at SEMA, but I have been unable to find it through Roush or Ford Performance. So how does only CJ Pony Parts have it...?¿?
Man I wish I could have been there
A question Brother, I have a problem with the map sensor harness, it shows me -45 degrees, any suggestions?
I have the same Roush Phase 1 kit for my 2019 F150. Are there any major differences?
You make these mods look so easy. It drives me nuts. ;)
hi, just a stupid question as im not from the states, but would this void the warranty?
Just purchased my 2018 Roush Stage 2 & payed for the supercharger as well. However, my supercharger won’t get to the dealer until July. I really cannot wait for this! Especially when they take out the phase 2 kits:)!! I’m guessing a good 760-770to crank ^.^
@marceli7034
5 жыл бұрын
must be jokking
building a 4.6L on a 4R70W in the 1994 thunder bird i have to hold 25psi with two turbos would probably cost less then the blower ya got their. but then the diff and the tires would explode.
ive heard some dealership sell a mustang with 700hp for 42K?! that comes with the same warranty. that's insane
Im happy that it just became carb emissions legal in california
I would like to get this installed on my 2021 Mach 1 with handling package, 6 speed manual transmission. What would it cost me? 🤔
I can see myself tried this and tow it to the shop.
this is crank power numbers right? cause that's insane for just a blower alone
really got to pull that bracket off every time you need to do a belt swap on your supercharger that seems like a real pain in the ass
Is the calibration program included in the kit? Can it be done by the user himself or must it be done by a professional? I live in Brazil - south america!!!!
Hello Bill, may I ask you what upgrades should be done on the side of the supercharger for my car to run durably safely? Really nice tutorial by the way!
@cjponyparts
6 жыл бұрын
The kit is designed to be perfectly safe for a daily driver. If I planned on racing with sticky tires I would upgrade the axles.
I have question, if I decide to buy this supercharge to my 2020 Mustang GT so should I change the OEM headers or it fit on the OEM headers ? Pls expert advise me
Bill looks like he's doing all the work, old mate there helping out has a fair amount of battle damage to his hands though I notice. ; )
@cjponyparts
3 жыл бұрын
Brendan is the host of our classic truck channel and definitely has some talent with the tools.
@matth4638
3 жыл бұрын
@@cjponyparts is this a bot,
i need this
@elcoyote5.010
5 жыл бұрын
is a pain in the ass that they dont add the tool to program it whipple does
@ydiaz8080
4 жыл бұрын
Get a whipple better..
Amazing step by step video, but it was missing some critical steps, like they didn't show how to take out the ECU, didn't say the torque specs when torquing bolts, didn't go over the tools more in depth. some of us don't know the exact type of tools used like how you drilled that hole on the block then did some milling inside and showing how you determined the right depth. There might be more but man those were critical.
God that red color is mesmerizing
@cjponyparts
4 жыл бұрын
I still miss it sometimes, I was never a huge fan of red Mustangs but I loved the race red!
@roushsalah05
4 жыл бұрын
CJ Pony Parts it looked so good in the video maybe it was the lighting or something but it made me want a red mustang again
My Car dosn't start after install, pcm flash with RDT Software & Databridge_CX..
Is the sc audible from the cabin ? can you hear the whine with this kit?
ROUSH SUPERCHARGER DYNO!!
what size throttle body are you using ..? The same as phase 2 or bigger...If same what size is it...? Thank you
so they dont provide the tune to flash in with kit?
what are the chances that I'll screw this up and blow my engine up? I'm wondering if it's worth doing myself or paying someone to do it.
Does it have to have forged internals for 12lbs of boost?
Good for you Bill, sure it will rip asphalt.
BILL do they make a lightweight K member for 2015-?
Bill, does this Roush scream (whine) like a Whipple?
So what did your final dyno numbers turn out?....and what's your 0-60 and 1/4 now on blacktop with street tires?
@cjponyparts
4 жыл бұрын
It made 648/532 to the tires. I never tried a 0-60 or 1/4 on blacktop with street tires.