2015-2017 Mustang GT Roush Supercharger Kit Phase 1 670HP 5.0L Installation
Bill shows you how to install a Roush 670 Horsepower Phase 1 Supercharger Kit on your 2015, 2016 and 2017 5.0L Mustang.
Purchase Product Here:
www.cjponypart...
Today we are showing you how to install Roush's Phase 1 Supercharger kit on our S550 GT. One of the biggest requests to date has been how to install a supercharger on a Mustang, since the day Bill got his new 2015 he has been talking about putting one on, and has chosen the ROUSH charger system to boost his GT up to around 627 horsepower.
Installation is a little complicated and very time-consuming. Watch as we take you step by step how to install the Roush Supercharger on your 2015, 2016 or 2017 5.0L Mustang.
Check out more Mustang 5.0L Supercharger parts from CJ's here:
www.cjponypart...
Check out more Roush parts from CJ's here:
www.cjponypart...
Subscribe to CJ Pony Parts on KZread here:
www.youtube.com...
Пікірлер: 551
I helped a buddy with his supercharger install on his 2015 GT, he is a very organized person so he had plastic containers labeled where each set of screws came from... He ran out so he had to throw out some of his leftovers in the fridge 😂😂😂
3:45 he gazed into the deepest part of my soul and knew.. He knew from there on i was now a mustang fan
@iRobYourLunch
9 жыл бұрын
Lol!!
@guitfan1954
9 жыл бұрын
So true....that's hilarious!!!
@mildside322
6 жыл бұрын
Bro, I read your reply and spit beer everywhere. LMAO
@EdwardFassnacht
5 жыл бұрын
Bro I'm deaaad
@spaceemperorkarl121
5 жыл бұрын
This should be in the video description!
I just installed the Roush phase 2 and Bill made this possible and gave me the confidence to do it. It took me 15 hours. If I can help anyone, let me know. Thanks Bill for the videos.
@demolaj1
8 жыл бұрын
+Chris F do you love it ?
@MrFatty239
8 жыл бұрын
I love everything except the roush tune. It pretty much sucks. If you get on it, it sets off the max torque limiter and puts the car in limp mode so its barley drivable until you shut it down a restart it. So you have to get a different tune. I barley went 60 mph and less than 5000 rpm when this happened.
@Zerogivengarage
8 жыл бұрын
Is your car a manual? sounds like the clutch protection mode might be kicking in although that should go off once you shift gears. The early tune had an issue with limp mode but that was when the kit was new and was fixed quickly by Roush.
@MrFatty239
8 жыл бұрын
It is a manual. Doesn't go off when switching gears. its giving me code P061B. got my tune in march...is that the early tune? Another problem is I cant get a hold of Roush, by phone, email, live chat, to ask them! Any help Bill is appreciated!
@Zerogivengarage
8 жыл бұрын
Did you get the kit from us? email me either way and I can help. bill at cjponyparts dot com
The most detailed video installation ever. Great job
I don't even own a mustang myself, but this video is so good and so satisfying to watch that I actually sat through the entire duration of the video! Thanks +CJ Pony Parts for providing a video with such good quality, clarity, various camera angles and a chill yet badass background music hahaha. Your Mustang is sick and congratulations on the new acquirement. Hopefully soon enough I'll have the money to buy my own stang, hopefully my so dreamed 2013 Boss 302 and I'll begin installing my own mods ( not that many though).
@bernercalito8422
7 жыл бұрын
Filippe Barros not in a bad way the music is like those porn background music. The video is very well explained. Thanks Cj Pony
@mikesmith4337
4 жыл бұрын
Same here, and now I want one! Nice job on the filming.
18:43 I get the feeling he didnt have a bucket under that haha. Been there man...
@kellypikula377
4 жыл бұрын
pikula
@armikm9846
3 жыл бұрын
Koolaid
I would sure feel better with Bill installing my Supercharger than letting my local dealership do it
@spaceemperorkarl121
5 жыл бұрын
The only time a dealership saw my car was when I drove off the lot with it.
@sbiegs3885
4 жыл бұрын
Local won't install it anyway.
@doriansimmons6913
4 жыл бұрын
I ask Bill, if they do work for the public he said no. I wish he did. Not to many you can trust to do this type of job.
@brettfrimmer6567
19 күн бұрын
It’s a bolt on supercharger it’s not rocket science. Nearly every ford dealer in the country has in most cases multiple technicians qualified to do this job. The ford dealer I work at has 3. One guy has done 30 of them now.
I have a mustang gt with a roush phase 1. This video makes me appreciate the engine a whole lot more knowing it takes a lot of hard work and proper installation.
man im 16 here watching this video trying to learn about engines, upgrades, and certain components that can be useful. im so confused on whats what but your step by step tutorial here is extreeeeeemly helpful. im glad i came across this
You guys have the best install videos
@Zerogivengarage
9 жыл бұрын
Thank you very much!
@jastanger
9 жыл бұрын
Bill Tumas I agree. They are the most thorough and practical I've seen, done by someone who is clearly an experienced and talented tech, as opposed to some goofball Hollywood type (AmercianMuscle). My only critique, (most people won't care, but sound for film is something I studied) is the music always playing in the background. It's a bit distracting and can be tiresome. Great job, though! I still don't know if I'll try this job myself on my new GT, though!! I'm worried I'll hurt her, and I really just think a pro will do a better, cleaner job.
@Zerogivengarage
9 жыл бұрын
jastanger Thank You for the compliment. The sound is something my videographer/editor is regularly conflicted about. We have done a few videos without the sound and we both feel they seem longer without it.
@jastanger
9 жыл бұрын
Yea. I can see that it's not an easy decision, as I don't know what I would do, either. In any case, thanks for the great videos.
CJ I want to commend you on the knowledge you display working on engines, or vehicle parts in general. I was lost after 5 minutes. If I lived close by I would without hesitation bring my 2007 GT Roush Supercharged Mustang to you. Thanks for sharing.
good for you man, i admire your patience, I'd be swearing up a storm the whole time, I don't know how you hold it back
@Zerogivengarage
7 жыл бұрын
I don't, I have good editors :)
thank you... I'm just playing this in the background while I'm dreaming of buying a mustang.
3:45 the way he stared I couldn’t look away I was locked eyes with him.
this vid is better than a movie:)
The cleaniest installation I have ever seen
I'm only 16 but I've wanted a Mustang for since I was like 5, I first saw it at a car show and fell in love with it. its my dream car
@matthewizatt8507
6 жыл бұрын
Oliver Chapman I can say the same
This is the best channel I have found. Cannot wait for the Mustang to come to Australia. Keep up the good work!
AMAZING install video man! You guys make such detailed install videos it makes it look doable for anyone with some knowledge. Cant wait to install this on the 2016! Kudos guys!
Bill, I used to have a Dodge Challenger, after watching your videos and thoughts on the mustang is what made me switch and trade my challenger in for a 2016 GT PP. So far I've redone the entire suspension system. Just debating to either go all motor or go with a blower! Thanks again for all your great video content and information! I look forward to more content!!
I just bought 2018 Mustang GT, which is completely stock - picking it up tomorrow 😊
My back is aching just watching you Bill...I think 🤔my local dealer will get this job.😁👍🏽
Step 1: Take your entire car apart.
@CrazyAboutVinylRecords
5 жыл бұрын
Step 2: Have your disassembled car towed to a custom shop and pay them to complete the supercharger installation for you.
@AKAKILLINGKING
5 жыл бұрын
jesaliga I legit was about to get to this point on the 2nd day and 10th hour LOL
@jonathanharger7430
4 жыл бұрын
GokaiSilver it’s a supercharger what do you expect to just glue it on top of everything and it work
@SkylineBNR34
4 жыл бұрын
@@jonathanharger7430 Yes.
@mikehughes8023
4 жыл бұрын
SkylineBNR34 That’s only for Hondas😄
Just bought a 2015 watching this made me drool 🤤 jealous,hopefully 🤞thank you for the video.
Hey Bill I'm glad you find that the serpentine belt was on the wrong side your fix it right before you put the anti-freeze Great video by the way I would like to know if I'm the only one notice it lol.
@Zerogivengarage
8 жыл бұрын
You are probably the 5th or 6th
thanks for helping me out with my VMP install you guys saved me 2k, I really needed help with the vacuum line's cuz VMP Instructions on the vacuum lines were crappy, awesome video guys :-) really helped me out
I don't even have a car yet but I love mustangs so I watch the video anyway 😂
Just want to thank them for telling the viewers that he had the belt routed wrong!🤣 And fixed it at the end of the video.
Come on Bill, I'm waiting impatiently to see the driving review with this supercharger.. Can't wait for the details
@Zerogivengarage
9 жыл бұрын
gmoz1 The dyno and drive video has been up for awhile now on this channel
@gmoz1
9 жыл бұрын
Don't know how I missed that. Is it still driving sweet? I'm on the UK waiting list and will likely become one of your favourite customers when the car finally turns up :-) Your product reviews are the best by far.
@Zerogivengarage
9 жыл бұрын
gmoz1 Thanks I appreciate the compliment! The car is running great! Roush had one revision to the tune and everything is spot on. I have around 2000 miles on the car how and absolutely love it
DISLIKES!? Must be from people who wish they had this Roush Supercharger Kit :)
Great video cj, I can guarantee the hardest part of this install was filming and editing the video.
GREAT video Bill! I referenced this several times during this past week install of the Roush phase 2 supercharger on my 2017 GT PP. Thanks!
didn't realize they were in PA. so am I, makes me happy
A true professional, this is amazing
This guy makes it look so easy.
Awesome video.. if you had a shop here in PA I would definitely own a 2015 GT and all my money would go to you for mods.
Great install video, I really enjoyed it! I also look forward to your complete review after you driven it for a few hundred miles!
10 Hours?! It only took you an hour. ;-)
@lennygt350
6 жыл бұрын
The First 10 you are so dumb
@ravneetravioli8222
6 жыл бұрын
They cut the video down to an hour dummy
@brucekirk5386
5 жыл бұрын
@@ravneetravioli8222 LOLOLOLOLHWHAHAHAOOOHOHOO.....HE WAS BEING RHETORICAL
@brianvargas4885
5 жыл бұрын
MarcoGallardo you’re 🗿
My confidence level was 100, and then I saw grinding on the engine.... started making phone calls.
Just to warn you guys the way he originally mounted the S/C belt is wrong it was something he corrected and failed to mention in the video, for those of you wondering why your belt is either not fitting or rubbing on the lower part of the head
Since this is a repost I guess I'll repost my comment from the original, the best I can remember. Firstly glad to see you caught the blower belt on the wrong side of the upper idler pulley....LOL. Also it must be major surgery to replace the blower belt when required since it looks like the bracket would need to be removed. Secondly I don't like the Roush requirement for the ECU to be sent to them for re-flash. The first reason is the stock tune is now unavailable to the end user which may cause some complications for returning the car to stock or purchasing a handheld tuner. I'm not sure, but I think a handheld needs to "marry" with the car using the stock Ford strategy. Second reason is if the end user wants to change gear ratios or tire sizes not having a handheld for user adjustable configurations makes the changes not very practical in the sense of speedometer calibration etc. The Ford Racing Whipple kit and others I believe provide for a handheld for the re-flash providing the end user the optimum in customization options for future upgrades. A great kit though and seems like a weekend with pizza and beer would be a reasonable estimate for installation. Also not sure, but it seems like Roush is still tuning "rich", for safety, since it appears a lot of black smoke is coming out the tail pipes. Thanks for the great video install and your '15 Mustang is making my '13 look bad...LOL...LOL
Hello my ford friend how about the guys out here that have trucks that they are building with five liter’s coyotes, I’ve been building on my 150 for two years now and plan to put a Roush supper charger but decided to also refresh the motor with rods and bearings . I will be looking for the next episode on install for a f150, this is very educational thank you CJ pony for the lesson. Sincerely ,Scott
This is a very well put together video. Nice job guys.
fantastic install nothing left to wonder about except i did not hear u mention to install the coil covers, but thats what the instructions are for but for a guideline on what to do Ford needss to ship u r video with each of these install kits it is that concise i have a gt500 but i still enjoyed the video
@Zerogivengarage
8 жыл бұрын
+perry lewis Thanks for the compliment. We do leave some very basic stuff out occasionally to keep the length of the videos down.
keep up the great vids, i order all my parts from your website :) bill you come off as a super nice guy and recommend all my friends purchase off ur site.
I love how you effectively have to mess up the stability of the car and handling just for more horse power. I'd take those braces and a better handling car, than fast in a straight line. Great video though!
@MikeGossett
3 жыл бұрын
This is exactly my thought and why I haven't added a supercharger to my 17. I'd rather have the stability and rigidity of full K members and the cross brace.
Man I love your videos. Keep doing what you're doing it helps slot
Awesome video and very detailed. Would've loved a small clip to hear how it would've sounded with the supercharger.
Just about to pull the trigger for my 2017, great video! I notice you reran the belt past the idler... I thought it was incorrect. maybe you should have mentioned that.
dam I was thinking of doing this but there are like a 1000 steps I'll just wait for the gt500
@arizonacolour8793
6 жыл бұрын
lmfao when you have money...
@spaceemperorkarl121
5 жыл бұрын
Perusing Person I think you're confusing the Mustang GT with the Ford GT....two VERY different vehicles. Mustang GT is 5.0L v8 where as the GT is a mid-engine turbo v6 sports car. It's like confusing a Porsche 718 Cayman with a GT2 RS
@nickmacias00
4 жыл бұрын
Perusing Person that isn’t true the dealers were just telling him bs cuz they just thought he was a dumb kid wanting a gt500 he literally just ordered two GT500s you really think he spend 1.2 million?😂🤦🏻♂️
Love all your videos man thanks for all the info and install videos !!!
That looks rather simple, long but simple. Makes me want to buy a mustang ...
Well I found what I was looking for Thanks now to fix up my 2003 expedition. ..yeah
LOVE THAT WHISTLE!
Great video! Love the detail and quality.
3:47...hahaha his face .. I'm dying
Holy shit what a job. Billy makes it look easy tho
theres one part in this video where the supercharger belt is fed the wrong way around the idler pulley, they fixed it at the end
The stock tower strut gets removed, so what will go in it's place once the supercharger is installed? What company sells one that will fit with the supercharger?
@sylvesterstallone8637
2 жыл бұрын
You don’t need a strut tower brace or anything like that. I felt no difference at all with my car which is a 2016 The suspension is fine no weird noises or anything
Wait I'm sure I've seen this already, I'm checking the video library and I can't find the original post, this isn't cause of the minor mistake you made by installing the belt over the driveline pulley is it.....haha I noticed anyway I said it before and I'll say it again "man I love being a turtle"...... Wait no that's not it.......great video the most detailed install on KZread great job.
I took everything apart now I can’t put it back together... please help me i don’t know what any of these parts are (Update: I lost most of the parts)
Looks like a big oval TB would be a better fit. I bet that’d pick up some good power!
Awesome video Hauss. I'll be looking at a mustang tomorrow. I was wondering something though. Do you need to upgrade internals for this supercharger or is it safe for the engine as is? Will it cause premature wear and tear just driving it normally? Does anything else need to be upgraded or is it just this kit and done? What a great mod. Instant beast. Props on your skills. Love the exhaust videos too. Keep up the good work.
Are you available for install on my 2017 mustang gt
You could hear one of the cameramen say action @ 26:06 lol
that was a satisfying video to watch... thanks man
Whilst you're videos are all superb I am always amazed at how clean your vehicles are underneath and in the engine bay, how the hell do you keep a daily that clean?
Hey Bill. Love the video. I'm leaning towards the roush simply to not void the warranty. Is it mandatory to send the cpu in to keep the warranty? Kinda sucks you lose all factory settings.
Thats a beauty of a pony car just came from the chicago auto show and fell in love with the new pony, i m having to much of a problem on deciding if i go for an evo x of this pony i love them both. I realy want to feel that boost of the evo but the pony stance out more than a evo x 😭 why is sooo hard
This Video is really great, helped me a lot. Meddl off
That SC would look awesome all Chromed out
Simply beautiful!
I wish I knew more about cars
great vid thx
anybody else noticed the wrong placed belt at the top guide pully at 51:47? 1:00:26 aww, magic fix ! :D
@alex38
9 жыл бұрын
Yep you're right
@messer23421
8 жыл бұрын
+2CREATthief also at 59:58 when he filled the fluid, he used the green antifreeze. But after he finished at 1:00:30 it had the orange fluid in it. But I love watching these videos. They are great for a diy'er.
@Zerogivengarage
8 жыл бұрын
+messer23421 I filled it with green universal antifreeze, once it got up to temperature the original pink left in the engine started circulating. That is why the color changed, no trickery there.
@messer23421
8 жыл бұрын
Oh, gotcha. Thanks for the info. I always was told it was bad to mix the antifreeze like that. I also know for a while that the orange stuff really did a number on engines. Is that not the case anymore?
@messer23421
8 жыл бұрын
Another question when you have the time, how much power can the stock coyote engine hold without having to forge the pistons and rods? I saw a video of some guys that put a whipple supercharger which they claim gave them over 750 hp at the wheels, but I would think that would destroy a stock motor?
I tried the Darth Vader voice over as I pulled the water pump , it just doesn't sound as good as you did it ! I practiced really I did .
Great video! Please make one for 11-14s! You can use mine if you want, I have a vmp stage 2 kit waiting to be installed on a 14 grabber blue gt.
So your belt routing was incorrect at first right? Just making sure I saw that correctly lol
@Zerogivengarage
7 жыл бұрын
Correct
What are potential downfalls to not using strut bar after installation of supercharger?
#YDBT Representing Bill !!!! Love your videos man !!!
Great video!
Great install vid by the way
Hey bill could you please someday do a instalation video for a whipple supercharger? thanks a lot!
Bill! Nice work! Question, I'm looking to get a 2017 gt and would like to get this supercharger. My question is, can the stock internals support this hp? Do I need any supporting mods? I'm coming from a 2011 sti and these engines easily blow ring lands. What's the most hp the coyote can handle before you have to start rebuilding? Thanks. This gt will be my dd and I'd like to add a decent amount of Hp while maintaining reliability.
@Zerogivengarage
8 жыл бұрын
The stock 15+ motors can handle this with no problems, I have over 20,000 miles on my supercharger now with no issues.
Bill, If I buy this kit from yall can you install it for me? I'll pay you :)
Amazing video, you guys do the best installations good details. Do you guys happen to have an install this detailed for the 2014 GT's by chance?
@Zerogivengarage
9 жыл бұрын
We did not do a 11-14 video but the process is similar.
Hey Bill. Just got done about 2 hours ago with my install. Thanks so much for the video. Say what you want but... That was a huge pain in the ass!! Who designed those hose clamps? This video was really helpful to use along with the instructions. I just hope everything works!
@Zerogivengarage
9 жыл бұрын
Congrats on the install!! Yes I agree on some of the clamps and fitment but nothing we haven't seen before lol
@sylvesterstallone8637
2 жыл бұрын
Those clamps would barely go on the hoses for everything that they’re required for but they will go on
I have a 2017 mustang GT 6 speed automatic. Do you have to build the auto tranny to match the power output? How much power is the auto tranny rated to withstand? 600whp is a lot. Hate to blow my trans. Also if the transmission is capable of hold 600 hp is this a reliable build? Can I still use my car daily maybe beat on it once in awhile? Will it hold up
@getsomebraincells
6 жыл бұрын
Jacob Johnson it is a 6R80 transmission meaning 6 speed rear wheel drive and 800 ftlbs of torque that it is rated for, they can hold more than that though. So you’ll be fine.
Well let me say it again...great video!!
Awesome video
for this kit do they just warranty the kit parts? or ford still warranty the entire car? to how many miles? also price for installation if authorized dealer do the installation?
Do these new Superchargers bolt onto an older 6-71 style blower manifold? I am interested in installing one on a 351 Cleveland 4 barrel ? Any info would be appreciated. Thank you. Excellent Video. All your videos are.
I've rebuilt a little 3.8 V6 1998 Mustang I want to build into time attack machine after I upgrade the suspension/brakes....should I supercharge it or just a great turbo??
Bill you’re a beast man. If I pay to fly you to North Carolina, and provide beer and BBQ, would you help me install one on mine Stang please?! 😜😜
is it a very hard install? or just takes time and patience? Good instructions on how to grind the timing cover?
I know, but what I meant was the additional kit like the fuel pump and Ect....
why is there more horsepower for the 2015-2016 in phase 1 then it is for 2011-2014 phase 1?
Great video! I want one for my GT now. When are you going to post a dyno and test drive video? I can't wait.
@Zerogivengarage
9 жыл бұрын
Nick Twaddell If you search our channel it is already up
The roush site says it can’t be installed on mustangs with adaptive cruise control. Which mustangs do and do not have adaptive cruise control?
Thanks for reposting this. Can't wait to see the dino test. I'm looking for a supercharger for my 73 Mach 1 351C. I'm wanting to run an EZ EFI 2.0\ something like it, but can handle a supercharger. You have a system for 289\302, but not a 351C. I'm in the process of building my engine to a 408 stroker with 9:1 dish pistons. Any recommendations supercharge EFI system.