Mudboss Setup #1 - Getting Started - Traxxas Slash Unboxing

Автокөліктер мен көлік құралдары

Mudboss Setup #1 getting started Traxxas Slash Unboxing
♥ Don't miss a thing! SUBSCRIBE!! Click the link! / @ovalrc
If your new to RC racing and want to get started in the Mudboss class then this is the video for you. Watch as we unbox the Traxxas Slash and install the parts needed to get started in the Mudboss 12T class. Check out the products i use at the track. We install the Salvas Mudboss body and the JbodyRC body.
SHOPPING LIST:
- Traxxas Slash 2wd 12T 1/10 scale truck ..... 189
- Venom Pro Duo Charger ... 109
- Salvas Mudboss Body ... 59
- JBodyRC mudboss Body ...60
- Traxxas 2735 Bumper ... 7
- Duratrax Body post DTXC2614 Fits HCG & LCG ... 7
- Power Hobby 5200 Mah 7.4v 2s 50c Lipo Battery ...45
- Horizon Hobby Metric hex driver set ... 20
- Deans Connector ... 5
- Deans to Traxxas TRX Female connector ... 4
Share this video:
Mudboss Setup #1 - Getting Started - Traxxas Slash Unboxing
• Mudboss Setup #1 - Get...
************************************************************
PLAYLIST:
MUDBOSS SETUP
INSTRUCTIONAL VIDEOS:
How to build a Salvas Mudboss step by step
• How to build a Salvas ...
FACEBOOK GROUP:
Oval RC
/ ovalrc
EMAIL OVALRC:
Ovalrcteam@gmail.com
#rcracing
#mudboss
#setup

Пікірлер: 49

  • @user-nm6wp1km7u
    @user-nm6wp1km7u4 ай бұрын

    Great video appreciate your experience

  • @mrg4838
    @mrg48384 жыл бұрын

    Great video, I've watched the racing videos, looks like a lot of fun, wish there was a track close to me in Surprise Arizona.

  • @rattlehead7281
    @rattlehead72814 жыл бұрын

    If I was building a drag slash I would've built this. Nice video!

  • @lowasteam5319
    @lowasteam53194 жыл бұрын

    Really look forward to where this series goes from here. Not a lot of slash oval setup videos out there that I’ve been able to find. Great job and be looking for the next one.

  • @OvalRC

    @OvalRC

    4 жыл бұрын

    next one coming up soon..

  • @CainSample
    @CainSample4 жыл бұрын

    Awesome video man👍👍

  • @rickyedison5151
    @rickyedison51512 жыл бұрын

    ive learned a lot from your videos

  • @crawlingnationrc4233
    @crawlingnationrc42333 жыл бұрын

    Keep the good work up mate

  • @wcrcp24
    @wcrcp243 жыл бұрын

    Love the videos. What do you think about the lcg chassis. And fast eddy bearings

  • @HunterTravels
    @HunterTravels Жыл бұрын

    Yes just found a dirt oval track a couple hours away. So what do I need to get started. I will watch the series thanks.

  • @austinlong9114
    @austinlong91142 жыл бұрын

    Hi Mark, great channel I truly enjoy the content you put out for us to watch and learn from! I am looking to build a couple cars for my son and I. I’m looking at Traxxas Slash online and there are several different variants. I just want to be sure to buy the right models for us. I’ve been looking at the 1:10 scale 2wd would this be the correct? Thanks for taking the time to read this and thanks for all your help and knowledge you share on your channel! Look forward to hearing from you.

  • @xHoosierDaddy85
    @xHoosierDaddy853 жыл бұрын

    Just bought my slash today.

  • @hilltoprccrawlers1979
    @hilltoprccrawlers19794 жыл бұрын

    I'm like everyone else here. I have my 2WD Slash chassis ready. I'm just waiting for the "Speed Secrets" video. Can't wait! Great video Mark. :)

  • @OvalRC

    @OvalRC

    4 жыл бұрын

    I saved the new slash in the box just for the setup series. I will be sharing all my setup secrets. You will get a lot out of setup #2.. i promise. Hang in there, but now you have a video if a friend wants to gets started

  • @OvalRC

    @OvalRC

    4 жыл бұрын

    I start shooting setup video #2 this weekend ..

  • @petercipolla8441
    @petercipolla84412 жыл бұрын

    Hi Mark I’m interested in getting into racing. I only discovered it from watching your KZread videos seems like a good time plus I really like dirt racing. My question is, I live in reading and I want your opinion on a good hobby shop that will help me get started. I also watched your 3 part video of getting started. Which helps a lot. Thanks for your time and keep the videos coming

  • @Libertymongoose420
    @Libertymongoose4204 жыл бұрын

    Is the lcg chassis allowed in this class. Also great video thumbs up just subscribed.

  • @sicboy83
    @sicboy833 жыл бұрын

    Only raced 2wd buggy, 2wd sct, and now 2wd ST. This is blowing up near me though. Very curious. Thank you

  • @frankpupello3764
    @frankpupello37647 ай бұрын

    I heard the traxxas rustler (which i own) shares a lot of parts with the slash...what parts do i need to turn my rustler into a mudd boss?

  • @chrissolo8472
    @chrissolo84728 ай бұрын

    Can you race in mud boss with a lcg 2wd chassis ?

  • @sandycraven
    @sandycraven4 жыл бұрын

    Yes , but I am in St. Louis , Missouri , where is a track near me ?

  • @chasemcdonellpw974
    @chasemcdonellpw9744 жыл бұрын

    Wait are you allowed to use a ecx turment

  • @steezytrtl2701
    @steezytrtl27013 жыл бұрын

    How do you adjust the suspension

  • @PHILLIPfry2010
    @PHILLIPfry20106 ай бұрын

    I want to run in some class?? I have tlr 22 2.0 center motor . I think i want a mccallister body? Have 4x4s also but i guess there isnt a class for oval?

  • @bgd5339
    @bgd53394 жыл бұрын

    I can't find that body! Where can I purchase that body?

  • @KruseNStuff
    @KruseNStuff4 жыл бұрын

    🔥👌🔥

  • @dillonstaton7340
    @dillonstaton73402 жыл бұрын

    I have a traxxas rally will that work?

  • @bjbohner24
    @bjbohner244 жыл бұрын

    I've been thinking about getting into these for a while now since seeing your videos. Two questions. Does J body have a website? And where do you get your wraps done?

  • @OvalRC

    @OvalRC

    4 жыл бұрын

    jbodyrc website is currently under construction but will be up soon.. scale speed hobbies on facebook is getting setup to do wraps for jbodyrc and others

  • @lowasteam5319
    @lowasteam53193 жыл бұрын

    Got a question. Most of the guys where I race, run slash front wheels all the way around. I believe the fronts have a different offset making them a little wider. Is there an advantage in doing that versus running fronts in the front and rears in the rear, or even rears all the way around?

  • @OvalRC

    @OvalRC

    3 жыл бұрын

    I run fronts on the rear and rear on the fronts.

  • @lowasteam5319

    @lowasteam5319

    3 жыл бұрын

    @@OvalRC interesting & thank you. I may try that just to see how it impacts handling. I always feel like I’m pushing or just a little tight so willing to try anything.

  • @dee3368
    @dee33682 жыл бұрын

    I'd love to see a straight axle on these ...like the real car

  • @randyjahoda9701
    @randyjahoda97013 жыл бұрын

    Not sure when this video was made but im new to this and really want to build an east coast modified but am having a hell of a time finding the Traxxas mentioned in the video. Any suggestions?

  • @andrewhowell4198

    @andrewhowell4198

    2 жыл бұрын

    You can get a 2wd Traxxas Slash for around $220.00 at Money Pit R.C. in Abilene.

  • @andrewhowell4198

    @andrewhowell4198

    2 жыл бұрын

    You can get a 2wd Traxxas Slash for around $220.00 at Money Pit R.C. in Abilene.

  • @Sheafs_RC
    @Sheafs_RC3 жыл бұрын

    I want to build in race these so bad!! I'm in Southern New Jersey. Any idea on a track by me?

  • @domcasella494

    @domcasella494

    3 жыл бұрын

    There is a couple I saw on Facebook groups. They are more in central Jersey near Springfield and Jackson nj

  • @dalebeck7876
    @dalebeck78763 жыл бұрын

    St Louis Area there are 1.Cottage Hills Illinois R/C Raceway 2. County Line R/C Raceway Valles Mines Missouri 3. Slideways R/C Raceway Brownstown Illinois 4. K-10 Maryville Illinois Closed this year because of covid All of these tracks are within about 1 hour of St. Louis

  • @PHILLIPfry2010

    @PHILLIPfry2010

    6 ай бұрын

    Jefferson city race barn. Well now oval. Crocker mo outlaw lane oval. Those also

  • @billymanilli
    @billymanilli6 ай бұрын

    I use the Duratrax posts on my drag cars... Anyone else use them, and notice how off-center (and crooked) the holes are in the bottom of some of them?!?! Great posts... other than that. I don't know why they have such an issue with that.

  • @fostbitten5721
    @fostbitten57214 жыл бұрын

    I didn't think you had to buy a certain Slash. Either the blue body or red body is what I mean. There are other 2wd HCG Slashes that you can buy that have different colors and liveries. That would be exactly the same as what you have there, just with different wheels and still have the SPEC tires on it. Personally I guess I hate the all chrome wheels I guess. And also some of the different bodies are more valuable than others and you can sell the body that came in the box for a decent price on Ebay.

  • @lloyderc
    @lloyderc3 жыл бұрын

    Anyone have vids on slash dirt late model

  • @muddfoot69
    @muddfoot694 жыл бұрын

    Too bad you can’t use the LCG chassis, so much better...but I understand the idea/concept of the class

  • @OvalRC

    @OvalRC

    4 жыл бұрын

    you can use the LCG chassis in the 13.5 Mudboss class

  • @jameslegendre1879

    @jameslegendre1879

    4 жыл бұрын

    i RUN A 13.5 Brushless SCOR Mudboss

  • @AimlessMoto
    @AimlessMoto4 жыл бұрын

    To bad you cant find them new under $250 now... and used are stupid pricey on eBay.

  • @DrDiff952
    @DrDiff9524 жыл бұрын

    Dirt modified!

  • @fostbitten5721
    @fostbitten57214 жыл бұрын

    I didn't think you had to buy a certain Slash. Either the blue body or red body is what I mean. There are other 2wd HCG Slashes that you can buy that have different colors and liveries. That would be exactly the same as what you have there, just with different wheels and still have the SPEC tires on it. Personally I guess I hate the all chrome wheels I guess. And also some of the different bodies are more valuable than others and you can sell the body that came in the box for a decent price on Ebay.

Келесі