Motorcycle Aluminum Frame TIG Welding and Painting - Wrecked Yamaha R1 Rebuild - Part 5
Автокөліктер мен көлік құралдары
Yamaha R1 Aluminum Frame TIG Welding and painting
During the crash the R1 frame really took a hit on the kickstand bracket, there is a crack all around.
I’m not an expert on aluminum TIG welding but I’m definitely getting more comfortable with it, today weld repair that frame and then paint it with the OEM color.
Spray painting is usually not the best choice for a professional result but it’s convenient and cheap when you don’t have a full blown paint booth, so I primed, painted and clear coated my Yamaha R1 frame, swing arm and clutch over all of that with aerosols.
The result is stunning to me, let me know what you think of it because I’m honestly blown away!!
Join me in my projects: bit.ly/2Wd2L5Y
Live updates of the build on Instagram: / tristandurandbuilds
Links of parts and tools used in this video:
Yamaha R1 Black Metallic Paint for frame, swing arm and engine: bit.ly/3hSdbiS
2K Matte Clear Coat in Spray Paint can: amzn.to/2CXcMNu
Carbide burrs used to grind welds: bit.ly/HSSCarbideBurrs
Hi I'm Tristan!
I live in New York and when I'm not working on my fitness clothing line (yoked.net) I DIY with intensity 😅
For now, I restore wrecked motorcycles. So I disassemble, weld, machine and fix those bikes so they can go back on the road!
Join me in my projects: bit.ly/2Wd2L5Y
Live updates of my builds on Instagram: / tristandurandbuilds
If you have any questions write them in the comments and I'll make sure to help 👍
Thanks for watching!
Music:
Song: AWN - We Know
Music provided by Vlog No Copyright Music.
Creative Commons - Attribution-ShareAlike 3.0 Unported
Video Link: • AWN - We Know (Vlog No...
Song: MBB - Summer
Music provided by Vlog No Copyright Music.
Creative Commons - Attribution-ShareAlike 3.0 Unported
Video Link: • MBB - Summer (Vlog No ...
Song: Jarico - Landscape (Vlog No Copyright Music)
Music promoted by Vlog No Copyright Music.
Video Link: • Video
#YamahaR1 #wreckedbikerebuild #Spraymax
Пікірлер: 23
Really well done....super satisfying ❤️
@TristanDurandBuilds
3 жыл бұрын
Thanks man! I agree it was very satisfying for me too 👍
Great job bro. Dudes definitely a Bachelor doing all this in his house and bathroom LOL
Great job man! Sprayed a couple cans of 2K clear in my tiny garage to fix up my old truck hood, and man that stuff is hard core. Great product, but 100% should wear a good respirator and know that the cloud fog of paint in the air will stick on *everything* in the room, leaving a rough crust texture.
@TristanDurandBuilds
2 жыл бұрын
That happened on my table 😅 It’s all rough from those clear coat droplets now
Hi my friend. Very nice video. I want to ask you does the r1 2006 have aluminum frame. I have cracked peace on my seating bolt.
Wowwwwwwwwww
@TristanDurandBuilds
3 жыл бұрын
Practicing more TIG welding 👨🏭
j’adore suivre l’évolution de la r1 cette épisode va sortir en français ?
@TristanDurandBuilds
4 жыл бұрын
Oui Fabien, je devrais publier cet épisode sur ma chaîne française aujourd’hui 👍
What kind of aluminum weld rod do I use boss ?? I just took mine apart and is ready to weld it
@peterepeat7066
23 күн бұрын
He can't answer cause he's in heaven after welding his fame 😂😂😂 joking
How much lower is your bike going to lean with the kickstand at such an obtuse angle?
@TristanDurandBuilds
3 жыл бұрын
You can see it on this video: kzread.info/dash/bejne/lGqczcd-fLbSZps.html
Hi, which wire you use? Clear Al or Almg?
@TristanDurandBuilds
3 жыл бұрын
I used 4043 for that
@razorr335
3 жыл бұрын
@@TristanDurandBuilds thanks!
when we will see next episode ?
@TristanDurandBuilds
3 жыл бұрын
I’m releasing next video in a few hours
Yah that is a hard hit. Here that bike would be salvaged for sure due to the frame.
@TristanDurandBuilds
3 жыл бұрын
It is a salvage bike 👍
Tristan you are NOT weldink ok. you must have a V shaped gap so the melted filler rod goes all the way. You are welding only at the wery top. Veld may look fine but i assure you if you strees the weld it will fail
@TristanDurandBuilds
3 жыл бұрын
Yes I agree that you need to chamfer where you weld, which I did, I had rounds and rounds of grinding and welding and sometimes the camera is hard to position to show what I’m doing, but I assure you that I dug with my file or a dremel to allow the weld to be deep 👍