I bought the m12 the other day. Tried sanding with it today. I think I had it turned up to 6 or 8. Dunno which. The newly charged battery lasted for about 5 minutes, maybe less, so I lessened the speed to its slowest. I would like to see a battery test under load to see how long it lasts compared to others. I do like it though. don't get me wrong I just didn't think about the battery not lasting as long if I had it turned up.

@toolrev

9 ай бұрын

I feel kinda bad now because in one edit of this review I recommend not getting the M12 because these tools use a lot of juice if used for anything serious. Maybe I'll reupload it with that part included. I'd return the m12 for the m18, which is almost exactly the same size.

@BoneCK15

2 ай бұрын

What ah batter are you running it with? If you're using a standard 1.5ah battery you probably wouldn't get much use out of it.

@iwannaapple7190

2 ай бұрын

@@BoneCK15 Using it often now. Has plenty of power at 2 and lasts much longer. I had it set to high.

the 11 months later part is so invaluable thank you so much , you're the true Top G

Thanks for the months later follow up. I think all reviews should be revisited after spending some time using them.

This was exactly the video I wanted. Thanks!!

Great tests! keep up! Thx

Still like the Dewalt. I like the control..

Well, unless this is your first cordless tool purchase you're going to go with the brand that you're vested in because you've already got batteries and charger. The one design flaw I would peg on the Milwaukee is that you can't set it down vertical on the battery. Why did they angle it like that?

$99 for the dewalt dcs356 with bag, battery, charger at the big box stores

Apples and oranges! I would hope that any tool that costs over twice as much as another would perform a little better😮

Thank you.

I would like to see the Flex go head to head too.

Great review and great tool also. The M18 fuel play no games

I'll still take it the Dewalt

As a pro carpenter and builder I only rely on Milwaukee.Durability and extreme quality achieved with these tools.

I have both I prefer the dewalt for drywall cuts, the Milwaukee for everything else, just like their impact drivers dewalt atomic little guy for self taps and drywall screws but Milwaukee for lugs and lags, either for deck screws they both run hot after a few hundred or a couple handfuls of holes with a boar bit depends on sizes

Could you do another Battle with the new Makita XMT04ZB 18V LXT?

@toolrev

Жыл бұрын

Here you go Sergio - www.toolrev.com/the-makita-starlockmax-multi-tool-xmt04zb-lacks-power/

the chuck moves on the milwaukee to reduce vibrations👍🏻

@toolrev

Жыл бұрын

May help clear dust too, helping it blast through a cut. Funny, I was literally using the Milwaukee while you where writing this comment. At first I couldn't find it and was bummed I'd have to use the DeWalt but found the M for the win at the last minute. Love this tool!

@kylethornton7151

Жыл бұрын

@@toolrev got my m18 fuel the other day, absolutely destroyed the dewalt dcs355 and the m18 bmt with it, fastest cutting multi tool i’ve ever seen, stay safe!

Milwaukee. It's not about speed alone. It's about precision, ease of use, ergonomics and vibration. What I would like to see is a 180 degree light on all these tools at least... Sometimes I move blade on 90 to make cut. So the light stays 90 degrees to the blade. I don't think it would be difficult to do something like that.

the Milwaukee seems like it takes the cake but I can currently by 2 of the of the Dewalts for the same price as the M18 fuel where I'm at

@jamesnm21

6 ай бұрын

Good because it will take twice as long with the DeWalt so you'll need 2 of them plus paying another guy to get the same amount done as one Milwaukee. You're really coming out ahead eh? 😂😂😂

@tiekuhn3839

6 ай бұрын

@@jamesnm21 different strokes for different folks I’m just a weekend warrior DIY fixer upper so the dewalt will work for me for half the price ¯\_(ツ)_/¯

@jamesnm21

6 ай бұрын

@@tiekuhn3839 understandable. I'd still get the Milwaukee because it's much smoother to operate. I've used the DeWalt and it vibrates quite a bit more.

It’s all blade dependent regardless of which tool you use

At 5:48 you seem to say that Dewalt can be (in some ways) a better choice if you aren't worried about cutting straight lines, but at 5:15 you said it's easier to cut a straight line with the DeWalt. Please clarify? Which is better at cutting straight lines? Thanks for the video!

@toolrev

9 ай бұрын

Sure, actually I said it's a better choice if you don't want to worry about cutting straight lines meaning it's easier to cut straight with the DeWalt because it's slower with a stiffer head. You can cut just as straight but much faster with the FUEL if you're competent with tools.

@lukewadel3675

9 ай бұрын

@@toolrev Thanks very much for the clarification. Very interesting! Subscribed to your channel now. Have a great day!

@drunkntigr

25 күн бұрын

@@toolrev Thanks for the clarification. I was thinking the same thing as the other guy cause of the wording. Really appreciate the response. If no skill and want straight lines but slow = dewalt. If you're more pro, the milwaukee is faster but you gotta be a pro to be able to attain straight lines.

I don’t own a multi tool. After seeing this video I feel I have to get one. Very informative brother. Great job👊

@qusaiqarqaz5941

2 жыл бұрын

You don't know how much you need it until you own one. I have the m18 Milwaukee fuel, a real problem solver!

@IMPACT-NATION

2 жыл бұрын

@@qusaiqarqaz5941 for sure. Beats trying to force a recip saw in a tight spot

You have the BEST real life comparison vs many other with all the gimmick of 'tests' but they don't compare comparable devices under real load. Thanks. I am not a loyalist and invest in the right tool for the right job - not the brand. I have invested in batteries of all 3 - Milwuakee, DeWalt and Makita.

@toolrev

Жыл бұрын

Thanks. I always say we're not pretending to do the scientific method here just trying to provide a good idea of what's going on.

👍👍👍

I'm getting the bosch 18v gop 34 build quality is first rate , and they have reduced the vibration by 50% on this model , and the blade change is the best on the market , don't like the milwaukee because of the pin you have to use to change the blade

Milwaukee is going to beat DeWalt every time because it oscillates 1 degree more every oscillation. Add that up and you will cut faster.

@MistAtsiM

7 ай бұрын

I'm just not sure if that translates to clean cut without damaging adjacent surface. For instance cutting base on floor.

@xristm

3 ай бұрын

Yeah agree with Milwaukee faster for sure great tool , but for precise cuts I feel Milwaukee like a Machete and Dewalt like a scalpel

What type of blade milwaukee use?

@toolrev

2 ай бұрын

It will take whatever, universal, Starlock, etc, with no adapter needed, which is one of the things that makes it's blade change system superior to the DeWalt.

Im waiting for milwaukee to make the chuck better I want a multitool but, I used my boss' and the dewalt multi tool and hackzall are designed way better than the milwaukee. I like milwaukee alot but, they're slacking on their saws big time. Their sawzall is still the best but the hackzall, the multitool, circular and mitre saw dewalt takes the cake. If speed is all you're after milwaukee is great. Thats their biggest gimmick "our tool does it faster" okay but do your tools last as long do your batteries perform as well in various temperature ranges? Ect. Theres so much more to tools than just the speed and the colour red!

How can be such a difference if all tools have nearly the same oscillation rate i.e. 20000 With the same brand new blade? Or is it the blades that come respectively with each tool? Does it let you push more because of more power before it begin to "jam"? In theory same "rpm" with the same new blade should not have that much difference in times

@danawd

Жыл бұрын

Ok i just see the angle on the Milwaukee… i listen only without viewing the screen so i missed out this detail🤣

@toolrev

Жыл бұрын

The Fuel’s angle, plus the chuck being allowed to float a bit, probably helps clear dust better than the others. I think poor dust clearance slows the DeWalt. RPM stats are unloaded and the Fuel seems to hold higher RPM under load without overheating, Many tools between brands are closer in performance. This particular Fuel tool is next-level.

@toolrev

Жыл бұрын

OPM

@elliotkane4443

Жыл бұрын

No-load speed is just a nominal measurement, most electric motors of this size have an RPM around 20,000-25,000, that they are all the same around 20,000 just indicates that these multi tools are all direct drive and do not have any kind of bevel gear differential or gearbox to produce more torque and inertia. That doesn't mean the electric motors or the drive method are identical I want to say I find it odd that you chose to comment on a video without watching it 🤨

Try the Dewalt's 12v with a 5Ah battery. It's twice as fast as Dewalt's 20v with a 5Ah battery and a lot smaller and lighter

@teewithey5879

Жыл бұрын

How can that be? Surely the 18v uses a lot more power

@konstantine381

Жыл бұрын

Powerstack puts out good power, the 12v line is just too limited, too little power

@josevazquez1042

Жыл бұрын

Spoken by someone who has never used these tools 😂. It’s impossible for a 12v to put out more power than a 20v as the dang battery

@eclecticgentleman

Жыл бұрын

@@josevazquez1042 If you've never used them why are you commenting? I build houses with them on a regular basis

@cgeorge6786

Жыл бұрын

@@josevazquez1042 So 20v tool battery has more power than a 12v car battery?

How tf does the Milwaukee have way more degree of oscillation and way less vibration? 😵‍💫

@toolrev

Жыл бұрын

Maybe the floating chuck where the DeWalt is stiff.

@damienkinchen

Жыл бұрын

@@toolrev oh, ok. The more videos I see, the more I regret not going Milwaukee. Lol

@donaldstepp4850

7 ай бұрын

Yeah it's crazy how Milwaukee does so good. DeWalt works and I haven't had any issues with them. I currently own 4 brands of tools. Milwaukee ( work) DeWalt ( work) metabo( spare) and Ryobi( trying out) . There is no rule that says you cant own more than one brand

@PRINCE_175

Ай бұрын

Milwaukee needs to get like DeWalt change out blades

I didnt knew that you could switch batteries between dewalt and milwaukee

@toolrev

9 ай бұрын

you can if you're not afraid of using battery adapters

@donaldstepp4850

7 ай бұрын

Someone told me that the adapters don't allow full power to the tool. I haven't noticed with my Ryobi impact. The Ryobi adapter let's you use DeWalt or Milwaukee so it's real nice for someone who has DeWalt and Milwaukee batteries

Milwaukee>

Ads suck.

@bulta209

Жыл бұрын

adblock plus

Deawalt multi tool sucks I just sold mine