Tried using a reciprocating saw in tight areas kzread.infoUgkx0vyBwjtx9GGOuiqUVT2sRoYqmDoNT_RI and it wasn't making the cut. Bought this oscillating tool and now I can make cuts in places that I couldn't with the reciprocating saw. Best tool for the job!

I am fully impressed! It’s just a complete kzread.infoUgkxGqOCINHE0Z0E5gxzSdNi9NWGugRY5Hm2 plan with the best resources and step by step instructions . These shed plans are so satisfying as if the sheds build themselves on their own. Worthy work Ryan!

So, this is what Canelo does when he is not boxing? Interesting...

@chrisdelarocha2944

2 жыл бұрын

😂😂😂 🇲🇽💪🏽

@ericacosta9071

2 жыл бұрын

“¡que viva Mexico cabrones!”😂😂😂

@rodrigocordova556

2 жыл бұрын

😂😂😂😂😂😂😂😂

@reyavila2753

2 жыл бұрын

Mamaste🤣🤣🤣

@nguont

2 жыл бұрын

“I was born ready!”

First time I used the Milwaukee I gasped 'holy shit' because of how quick and easily it did the cut. I was even more so impressed that it did it without vibrating my hands at all or ringing my ears even in the slightest. I usually dread having to use a multitool because of the awful sound they make and the vibration, but the Milwaukee is actually fun to cut with.

Excellent review. No fluff just crisp info. Love that you don’t waste time and give me the straight skinny.

FYI: You can lock the DeWALT trigger on so it can be used without holding it down.

@HG-409

3 жыл бұрын

Was gonna say the same thing

@RRBuildings

3 жыл бұрын

Totally right my bad

@electricrenfro1480

3 жыл бұрын

Also a good thing when you leave the battery in the tool so it won’t accidentally run when stored. Had that happen before.

@williamgadway9521

3 жыл бұрын

YES was just gonna say lol

@idrive99dodge

3 жыл бұрын

Does its lock at desired speed?

Possibly the best disclaimer I've heard ... being so upfront makes your opinions a hell of a lot more valuable than most other channels. 👍

@1971merlin

3 жыл бұрын

Too many other channels just read the vendors preprinted script. And it sounds as fake as all heck.

super sweet quick vid man .. like these a lot! great channel you guys have here, thanks for making them

I have both. The Dewalt is my fave. The Milwaukee has a stupid angle so it can't stand up on the battery. The Milwaukee (18) just feels awkward to me and my crew. Great Video as always!!

I own a DeWalt, but I have a Milwaukee in my work truck. They both do the job when I need them.

When using this type of tool you are supposed to use it at a slight angle so the blade can evacuate the sawdust from the area. If you go straight down as he demonstrates the blade can't remove the dust and can no longer make any more progress because the teeth of the blade are filled with compacted dust. The reason the Milwaukee succeeded is because of the extra angle the blade rotates, this allows the tool to evacuate dust better but still not as efficient as just holding the tool slightly at an angle so it can properly remove the dust from the area.

@SavageVoyageur

Жыл бұрын

The guy acts like it can’t plunge cut. Yah right buddy. You going to tell me it doesn’t plunge cut, hahahahahahaha nice try.

@andymagic2924

2 ай бұрын

Nice try 😂

*The 3 speed is good **MyBest.Tools** trying to keep to a low speed for a long time with just the trigger is hard.The only negative is I keep bumping the on/off switch when changing blades, not dangerous but annoying.*

I've used both. Dewalt is loud, vibrates a lot, and gets hot. Trigger allows more precise starts in fine carpentry. I like to use the Milwaukee for rough carpentry long hours usage. Not having a trigger makes it hard for real precise carpentry/fabrication

Spot on review! Used both tools yesterday at a jobsite, side by side.. Same task and MILWAUKEE wayyyyy out performed the plunge cut.. The vibration in the Milwaukee is almost non-existent while the DEWALT has an intense amount of hand fatigue as well as a very hot handle after several minutes of use. The Milwaukee blade change is trash on this I will say.. I am a DEWALT user but this one underperformed Milwaukee no doubt. Again excellent review.

I have both but the Dewalt with the trigger and quick release make it hella nice. Personal preference. Both are cool.

Great review! To the point, and no ridiculous over the top reviewer👍🏼

Fantastic video brother!!!! As a full time Construction Superintendent with a large company a and life time Hands-on Handyman, I totally agree with you that Milwaukee has a much better set up than Dewalt and many other competitors. However, both are top notch equipment, whatever the tool type. This is why I own both brands just in case🤙🏼😃 My wife hates to see me walk into Home Depot 🤣😂 or shopping online for tools. Anyways, thank you for all the hard work you do out there so inspections don’t fail, for taking care of your customers and especially for these videos that bring inspiration and motivation to all of us that watch them. You’re a young man but ancient in building wisdom my brother!!!!! Keep it up🙏🏼🤙🏼💪🏼

@dangrimes5078

Жыл бұрын

Kyle is awesome isn't he? He just seems to have his shit together like few others. He is a perfect example of how you can still succeed in this country if you want it bad and work your ass off.

This was one of the best hardware reviews I've ever seen. To the point and with usage example.

@DoubleD72

3 жыл бұрын

it was terrible. he deliberately left out multiple features of the products that are decision making features. the guy is clearly a Milwaukee fan boy if you watch his other crap videos. he LOVES his Chinese tools.

Been running the DeWalt this season as I already had a slew of them. Did get a little sore from the vibration but being able to flip the blade around when working in tight places was a huge time saver. Impressed by the Milwaukee's plunge speed though.

I prefer the dewalt over the milwuakee (multi tool specific) if seems to fit better in my hands and it’s quicker to change/rotate the blade. They definitely both blow the ridgid multitool out of the water! I carry four different brands, to have each specific tool that i like the best. Yes, i have to carry four chargers around, and have extra batteries in each brand, but i have a very custom collection, and in my opinion, i have the best of every tool.

I find having the trigger is a huge plus . Same with a jig saw .. you can release your finger the second you want the blade to stop cutting as opposed to having to reach over and turn the tool off

I had the Milwaukee. Overtime dust gets into the variable speed dial ultimately leaving it stuck in just one position. It's a hassle to clean properly after the finer dust gets in there. The quick change too in the Dewalt, which I now have, is so much better and the plunging is easily off set with slight back and forth motions of your hand to achieve the same results as the Milwaukee.

@LegalAmerican4

3 ай бұрын

That's good to know that you just have to do additional steps with the DeWalt to get what the Milwaukee can do automatically

@kurts3779

3 ай бұрын

Just returned the 3rd Milwaukee backpack sprayer due to leaking. WTF. So far the Scotts battery powered garden sprayer has been better the Milwuakee. Who have thought.@@LegalAmerican4

I use the DeWalt for trimming fiberglass laminates and find that the low power (light trigger) while plunging; keeps it from marring an area by skipping around, then I can go full power for the cut. Different functionality gets different market share for these tool manufacturers.

Ive got a couple of the Dewalts and I find in wood, they need the blades with bigger teeth(lower TPI) count to cut faster ! And it also has a trigger lock.

Terrific review. Please do more reviews like this.

I’m a recent subscriber and this is one of the best channels I watch!

@RRBuildings

3 жыл бұрын

Thank you

Good review man. I like the disclaimer at the end.

One of the first things I was told in carpentry, let the saw do the work. That was my mentor when I was much younger, watching me using only 50% of the the teeth on the saw to do a cut, instead of longer strokes to use more of the teeth for an easier cut. The Milwaukee vibrates less in part because the longer movement requires less changes in direction for the blade. Over 4mm compared to 1.6mm means the DeWalt is changing direction more than double the number of times, so vibrates more. I use the DeWalt as I run all DeWalt tools, so batteries is the deciding factor. Keep up the great content, always a good watch, especially during lock down!

@CncObsession

3 жыл бұрын

The 1.6 refers to degrees as in a sweep. My guess is it is a larger stepper motor.

@gregorylondos534

3 жыл бұрын

I own the M18 Batetry Platform...

@m60mgman

3 жыл бұрын

The new Milwaukee designs includes greater vibration dampening of the motor and oscillating mechanism. My M12 Fuel is very smooth with very little vibration compared to my Dewalt and Makita multi-tools. They all work, but I reach for the Milwaukee the most.

Love the videos. Keep them coming

Your tool match ups are the best on KZread. I like your professional opinion and demonstrating the differences.

Nice honest review. You hit the nail on the head when you talked about battery platform. Also that quick change on the dewalt is exactly the same as my corded porter cable. The same as mac and Stanley and crapsman which is all TTI.

@222aint

3 жыл бұрын

Stanley Black+Decker owns the brands Dewalt and Porter-Cable. And Kobalt, Craftsman, and probably others. So Dewalt’s quick release is copied from PC. Darn incestuous. yeah, TTI owns Milwaukee tools, made in China. But all are good tools

Sensational comparison video. I was trying to decide between both units and I think the Milwaukee is the superior multi tool for my needs thanks brother :)

Thanks Kyle. Good honest review. I'm a Makita guy myself. 👍😁

@RRBuildings

3 жыл бұрын

Thanks. Makita is good stuff

Man I was going to buy one this weekend. Thank you!!!!!

ergonomics and quick change feature on the Dewalt is why I went with them for their multitool. I've used it a ton a love it.

Great info comparison, also great comment section, thanks. Very helpful since my day job the company supplies all Milwaukee and I'm Dewalt in my shop and I need one👍👍👍👍

I am a milwaukee guy but Dewalts quick change is pretty nice

@RRBuildings

3 жыл бұрын

Sure is

@foundryman1985

3 жыл бұрын

@@RRBuildings I'm just a weekend diy, but I don't find myself changing blades that often that it's makes it a deal breaker. I've used both, like the feel and power of the Milwaukee better. The quick change is nice, but I pick a blade and end up using it most of the day!

@JHorvathCinema

3 жыл бұрын

It’s the only dewalt tool I own and I got it for the trigger and the quick change. I wonder if the auto mode would provide the same functionality

@KyleMorpheus

3 жыл бұрын

Easily its best feature.

@kosinskiarek

3 жыл бұрын

Same here I'm mostly milwaukee and i have gen 1 m12 multitool. I used the new (the one in video) DeWalt that my father-in-law has and I had to have it. The multispeed trigger and that amazing quick change mechanism its what sold me. I used to have Milwaukee jigsaw and the hold down sucked ass. I now have Brushless DeWalt jigsaw and their blade holding mechanism is amazing just like this multitool. Thanks for great video!

many thanks to you for an exceptionally well done demonstration, superb detail illustrating of each tools design features. I am contemplating buying one or the other of these tools at this time. I have to say though, that I learn probably much more from reading all the comments. In this case there is no clear consensus of which tool is better. It is pretty much a matter of personal tastes of each user....compelling arguments for and against a tool come down to subjective valuations and I suppose that will always be the case. For me, I value less vibration, a wider angle of oscillation (which translates to improved cutting) and the reputation of Milwaukee for quality. I have the red machines in impacts, drills, right angle drivers, cordless and corded and so have first hand experience with the quality aspect. I do have some corded DeWalt drills and die grinders, they have been good, have worn a few out in fact, but no problems until then, however the fit and feel of the Dewalts, in use, never matched the pleasure in the performance of the Milwaukee tools.

Great video, helped me make a decision on which one to buy. Thanks man. 🙂

Great comparison video! I’m looking for a multi tool and I have both Milwaukee batteries and charger a DeWalt battery and charger so I could go either way ...this helps

Came over from the Matt Risinger's channel from the Build Show way back in 2019! LOL.... Love some of the stuff I've already seen!

@RRBuildings

3 жыл бұрын

Awesome thanks

I think it depends on your use case. If you want full control of the cuts and don't plan using the tool for long hours at a time then the Dewalt is probably perfect for that. If you don't need full control of the cuts you make but you need to do long hours using a tool to get the job done and worry about injury due to vibration or RSI's then the Milwaukee would be perfect for that. If your older and suffer chronic hand pain and need to get the job done regardless of how long it will take then Milwaukee. I plan on buying the Milwaukee and put it in the same bag as the Dewalt because that will give me complete control over which one to use for what job. So in short Dewalt is good for precision over power in a short time frame, and the Milwaukee is good for longterm use if you want to avoid injuries over time, plus it has the raw power (lots of it) for all types of jobs that the Dewalt might struggle on. Another way to put it is the Dewalt is a DIY'rs dream tool, and the Milwaukee is a Professional's dream tool. You can use both professionally, but they both have their pros and cons. I rather have both of them so I can choose for myself since its a tool I use a lot.

Committed to Milwaukee for years. Satisfied.

The dewalt has a lock for the trigger, so you can actually hold it how ever you want, funny how you didnt notice that, in your hand. The variable speed is so much nicer, than having to try and fumble for a speed setting, that breaks over time, like my M12 did.

I am on the dewalt battery platform but now you can buy any tool and get a changeable battery device to work with all tools. These devices are from Amazon. I will be getting some red tools in the near future! Great vidio!

@Lugnut64052

2 жыл бұрын

Yeah, the battery adapters make the tool platform arguments pretty much moot. You can adapt any major platform battery to any major platform tool.

the moment I saw you use Auto, my jaw dropped and now I'm warming up my truck to head to my HomeDepot

@anything_of_anythingmrb7985

3 жыл бұрын

Ha nice! Same

I personally use the DeWalt oscillating tool I find the variable speed trigger useful for plunge cutting drywall and different situations I'm no tool expert by any means but I've noticed plunge cutting Hardwoods the looser you hold the tool the faster at cuts just my opinion

@justgregnow

3 жыл бұрын

You're actually correct on your point 👍

@Defamed.

2 жыл бұрын

And it locks on.

@independentinstallations8419

2 жыл бұрын

Yes the loose grip allows the tool to do the work essentially when you grasp it tightly you loose some of the vibration. The opposite however can be said about cutting material not firmly in place. I often go through and Refasten door casings just above where I intend to cut them because if they have any play in them the cut takes forever

There is an episode on project farm for oscillating tools. Can't remember if it's the tool or blades though. Worth checking it out. Consistently tested.

Good review, helped me in making a decision.

I received the Milwaukee for Xmas and it’s shocking how quick it cuts! Great vid by the way!

I bought the Milwaukee tool 6 months ago and it works well. I have all Milwaukee batteries so that was the main reason I bought that brand.

I use the M12 version of the Milwaukee. It kicks ass when you need it to, and is defo a great tool.

The more up to date dewalt has 3 speeds and a trigger lock so you can use both hands. What you didn't mention is the dewalt comes with a 'screw' accessory so that you can use star lock blades too. Nice addition by dewalt tbh.

I thought you said it was going to be 2 minutes. JK. I love your show, Happy New Year, keep up the great work.

Didn’t think I’d want that tool,until I used one..Plunge cuts great.I use it installing hard wood flooring trimming around floor ducts

@joshuakemblebluegrass838

3 жыл бұрын

It’s the tool you never think about till you use it once and then you have to get one because they’re amazing and have so many applications!

I work with a ton of Makita loyalists they're indifferent to my Milwaukee impactor and drill but they absolutely love my Milwaukee multi tool.

Great video 😎 the milwaukee looks great dewalt user here

Great video. Nothing like a real world comparison.

I haven’t used the M18 tool but I have used the m12. And it doesn’t have same change and auto feature. But I went from that to the dewalt and I stated buying and changing out all my tools to dewalt just because of how much I love the oscillator. Maybe one day I’ll give the m18 a chance but at this point my wife would kill me haha.

I’ve gone through 2 of these dewalt xr multi tools in 2 years, going to give this power beast from Milwaukee a shot

I’m curious what the backside of the cut looks like. Does it bust through/tear out or does it leave a smooth edge? Ive been debating on getting an oscillating tool and I’m already stocked up with just about every Milwaukee m12 & m18 tool. I’d be mostly using it to cut out receptacles while finishing the interior of my shop.

10 years ago when fein was the only option Porter Cable came out with the quick release for blade change. I use the dewalt now but it's just because I've already invested in the yellow batteries.

Great honest review. I just bought Milwaukee :)

I have the Metabo model CV18DBLQ5 cordless 18vt oscillating tool and it is similar to the Milwaukee in many features and in design. It is my go-to buzz saw. Low vibration. Like the Milwaukee, the Metabo has the auto feature and it plunges better than my old corded buzz saw, which I will not mention. I have upgraded all my cordless tools to the Metabo HPT line. I came from the old Hatchi line of cordless and corded tools. That is where I started my upgrading.

Thank you for posting this helpful video

I see you are learning from your own words.. knee pads!! Great work buddy! I learned to late at 31 and lost 70% on my left knee and 20% on my right.....

Most excellent information thanks a ton !

00:47 the Milwaukee has a sick beat to it

I believe the new dewalt version has a three speed selector. I have the original version but I bought my father the updated version for Christmas. Haven’t had a chance to try it out but there is three speeds to choose from.

I like this 2 minute toolsday concept. Please keep it up. I find the comparisons and reviews helpful when making purchases.

Unrelated to this specific topic, but...I’ve been looking into the cordless Milwaukee nailer to use with my own barn build and in your review video you used 3.5” ring shank nails and I can’t find those online anywhere. Any help you could offer? Love your videos!

great comparison, thanks!

I have a DeWalt and a Mikita. Both do the job but just like shown here the Mikita plunge cuts must faster. Using the hook style drywall blades you can cut as fast as you can walk with the Mikita. I have one work van equipped with DeWalt tools the other with Mikita by way of employees choice. Interesting video seeing them head to head.

Just got the dewalt i use it for drywall repairs and its worth every penny I would say its one of my most used tools for demolition it sure beats using a drywall router getting all that dust in your eyes isn't too fun and its 10 times faster

@ajaugatarip5285

2 жыл бұрын

I do drywall. I just use the router for cutting drywall edges on door frames, electrical boxes and that’s about it. Drywall multi tool for everything else, specially for repairs

Keep on posting!

There is an lock button to keep the trigger in on the dewalt 20v max xr. You can still use both hands and place them wherever you want. Unfortunately the only down fall to that is being it trigger has to be all the way in for the lock switch to work

Great job well said an I likecyour demonstration been awhile since we seen you

Great comparison, comes down to what platform you're on.

I am torn between the two. All I’d say is the Dewalt is probably better for a more accurate cut!

Fein v/s others , salutations from Chile !!

great video thanks for the info

I have DeWALT but both of them are amazing tools ✌️😃👍

I would like to hear more of durability testing angle and how they hold up over time

I've got the Bosch GOP18V-28N and I really like it, and it has a very cool accessory called the "GMFDSG Cut Saw Depth Gauge" that you can set the depth of cut, it really makes things like cutting an access panel into flooring without cutting the subflooring easy to do. How did we get along without these tools in the past? LOL Neither Milwaukee nor DeWalt is really available here in Japan. Great video Kyle. Cheers from Tokyo Stu

I've used both on jobs until I bought my own, I got Milwaukee cause it's quieter and for the auto feature, for me the quick release doesn't matter.

Also you can control the speed on the dewalt by the 3 settings on the base

Thank you for this video!

Ultimately I feel like both of these brands are the best. It really depends on your battery system.

I'm a dewalt guy but the milwaukee looks sweet . I have to much money tied up in my tools to switch over but love your reviews

Love the 2 minute tool reviews. Please keep doing them.

awesome details..thanks man

Heck yeah, I've asked you a couple times in your live streams, which one you liked better!

@lemd9173

3 жыл бұрын

He got free tools from both of them . Sorry ! he can't answer you .

Super cool, I had no idea these little guys would rip through material that fast!

The Fuel can also run any style blade due to their locking mechanism. Fella I work with uses a Fein multi tool and star lock blades. I can run anything in mine including the star locks, dewalt can't do that. Is the Milwaukee locking system more cumbersome? Sure but I will deal with that for versatility on a job site

@DoubleD72

3 жыл бұрын

So can the DeWALT. it has quick release as well as a nut for any style blade from any manufacture. Milwaukee you can ONLY use quick release blades. make sure you know what you are talking about before making comments about a product.

I have the dewalt and really enjoy it. I’ve beat the hell out of it and never seems to wear in the tool itself

fair review thanks for showing

Very nice great, honest and fair review thank you . I thing I didn't hear is price and if I could afford the Milwaukee I would buy it . To me it's just not worth paying double the price of dewalt...

I believe it is a Black&Decker patent. The PorterCable oscillating tool has the same quick release as well.

Great review - great job! It would have been interesting to see how fast the Milwaukee would have been if you set it on high.

The DeWalt has a trigger lock out to keep it running in any position. I'd take the variable speed trigger ANY day