MHI Stage 2 Turbo on 2018 Accord 2.0T 6SPD
Үй жануарлары мен аңдар
After a month for waiting the Mitsubishi Heavy Industries (MHI) Stage 2 turbo. I installed the turbo didn't take few hrs, more than that lol. My first time to do the swap turbo and I did it lol. It's time to tune the accord. Most Ppl Highly recommend for Etune/tune is Derek Robinson at IWM and I will go for him then do the dyno after. I would like to Thank you Axionindustries for parts and 10th Gen accord/AXFamily fb group I appreciate the help..
You can find the parts here.
• MHI Stage 2 👇
stores.axionind.com/2017-fk8-...
• PRL Turbo kit 👇
prlmotorsports.com/products/h...
• Type R Coolant pipe 👉 19522-rpy-g00
• Reducer fitting for Coolant 👇
www.amazon.com/dp/B07PNMTGV1/...
• Autozone or O'Reilly for 90° Elbow Rubber hose
The PRL will release soon for the vacuum line and other parts for Accord 2018-2021 that you don't need to do the puzzle 😉.
Thank you for watching!!! 🙏
Follow me Instagram 👉 @Kulblue
I dont own the music
Пікірлер: 51
Thanks for making the video! Will be helpful for my CTR turbo swap
@Kulblue
3 жыл бұрын
No problem 😊. Glad to help 🙏
Good vid, subscribed. Will be installing bigger turbo soon
@Kulblue
2 жыл бұрын
Nice. Thank you!
Hello, nice unboxing. Glenda sent me here and asked me to support you. You know the drill bro. Wait for you
@Kulblue
2 жыл бұрын
Thank you! I subscribed your channel
Oooh I can't wait until you hit a dyno
@Kulblue
3 жыл бұрын
Me too 😁
Love the video! I plan on doing the same turbo. Was there anything else that you had to get that isn't mentioned in the description or I should be set with everything you mentioned?
@Kulblue
2 жыл бұрын
You need all gasket for the turbo. You can get it from PRL , OEM some of it is backorder till now.
@gordonharris5788
2 жыл бұрын
@@Kulblue got it thank you for the help
@Kulblue
2 жыл бұрын
@@gordonharris5788 welcome
Just wondering did you have to modify the mounting bracket under the turbo?
I love my 2019 accord 2.0 manual as well!! Bremerton, wa here. I got the dc sports exhaust , what exhaust u have?
@Kulblue
3 жыл бұрын
Borla Exhaust
@Kulblue
3 жыл бұрын
I'm more north Burlington Wa
@brandons1067
3 жыл бұрын
@@Kulblue you know our manual 2.0s a unicorn car right!! Lol.. they are verry rare
Did Derrick send you the e tune right away? Or did you have to drive the car around and send him logs
@JuNpwr
2 жыл бұрын
he provides a base tune to start logging data and email back to him. he will send you the next revision tune file to log again.
Where did you get that fitting to move the vacuum line to the right side on the original inlet. I'm changing my inlet to the type r on the stock accord but I don't have the part to move the vacuum line and connect it to the one on the right
@Kulblue
2 жыл бұрын
Bought from orielly store but you can buy now from PRL for a set
Did you loose much low rpm tq compared to the stock turbo 🤔
Does the Accords have the same fueling restrictions as the Type R? Meaning needing to do the high pressure fuel pump, Injectors etc if you want to really push the power? I'm at about 385 in my FK8 but can't do the Turbo until I drop a good amount of money into the fuel system
@chrisdelarosa4120
Жыл бұрын
Yes
@chrisdelarosa4120
Жыл бұрын
Meth and ethanol can solve your fuel problem
@RelaxAndSmokeMeth
6 ай бұрын
I have a down pipe, front pipe, intercooler and hondata. do I need the xdi fuel pump to make the most from the mhi turbo?
@thinkforyourself5672
6 ай бұрын
@@RelaxAndSmokeMeth 100 percent. At the very least XDI and Drilled fuel line. You really should do that, Injectors and LPFP as well
Hell yeah. I'm subbed on this. I have the stage 2 as well. Most power its made so far is 486whp. Not my car. @bigturbo2.0 on IG
@BMR_WRLD
3 жыл бұрын
I'm following you on IG, I thought your handle was familiar
@Kulblue
3 жыл бұрын
Dang 480whp what tge mods ?
@BMR_WRLD
3 жыл бұрын
@@Kulblue in Joel's video, I seen the Type R almost 500 with this turbo. Do you hear spool in your exhaust? What is your exhaust set up. It makes the Borla sound badass. I want the thermal Also what revision tune. Do you notice a little bit of difference from stock? 😂
@Kulblue
3 жыл бұрын
@@BMR_WRLD Still doing the etune . The borla is so loud lol
@BMR_WRLD
3 жыл бұрын
@@Kulblue just found this out. It is warned not to use 0w 20 oil. Instead 5w 30 oil
How did you get a base map tune from Drob?
@Kulblue
2 жыл бұрын
I purchased the E-tune from them. He sent me first base map tune.
Did you loose much low rpm tq compared to the stock turbo 😂
from where you get the parts to swap turbo ??
@Kulblue
2 жыл бұрын
Axionindustries .com
Where you from man?
Hello! i have a 2018 accord 6spd 2.0t. before making any sort of upgrades i’ve been doing a lot of research and would like to ask questions. 1. what total distance have you driven since the installation? 2. what problems did you run into with this turbo installation? 3. current gas mileage (what roads or distance traveled) 4. maintenance? what is constantly being watched with this installation? i think that’s all the questions i have for now. thank you
Never went over 4K rpms lol
@kaylamercado3400
2 жыл бұрын
wasnt tuned yet. you want him to blow it?
Yo help me out
@Kulblue
2 жыл бұрын
What u need ?
@zaytovenng3576
2 жыл бұрын
@@Kulblue where you from anywhere close to Ohio?
@Kulblue
2 жыл бұрын
@@zaytovenng3576 nope Washington state
@dnycednyce1774
6 ай бұрын
Any Knowledge of the prl p700 .Know of anyone use it on an accord 2.0t 10sp auto 🤔