Money Pit?! 💸💸💸 How Much It Cost To Do A Type R Turbo Swap! Tips & Tricks!
Автокөліктер мен көлік құралдары
I'm going to be breaking down what parts you need to do a Type R turbo swap on the Accord, and how much it will run you! Tips and tricks included. For detailed how to, check out @JustaHondaAccord's video here: • 2018+ Accord Type R Tu... and @accoRding2Joel: • #1 How to: TYPE R KILL... their's is much more detailed.
Bare Essentials!
Turbo (new, can buy used locally) $600-$1500: stores.axionind.com/2018-hond... (shout out @axionind)
Tune $600-$700: www.imwtuned.com/
Gaskets $100: prlmotorsports.com/products/h... (@PRLMotorsports)
Misc. Hoses and Adapters ~$50: 1/2" to 3/8" Barb Hose Adapter, 1/2" 90 Degree Hose (www.amazon.com/gp/product/B00...)
Downpipe: PRL $950 (prlmotorsports.com/products/2...) or RV6 $650 (www.rv6-p.com/accord/10th-gen...)
Wastegate (if not provided) $255: stores.axionind.com/honda-civ...
Honda OEM Type R Heat Shield: www.hondapartsnow.com/genuine...
Turbo Bracket: www.hondapartsnow.com/genuine...
Oil Feed & Filter (included in PRL kit): www.hondapartsnow.com/genuine..., www.hondapartsnow.com/genuine...
Oil Return Line & Hose: www.hondapartsnow.com/genuine... www.hondapartsnow.com/genuine...
Intercooler ~$600: prlmotorsports.com/products/2... or www.mishimoto.com/performance...
Intake ~$350: prlmotorsports.com/products/2... or www.mishimoto.com/honda-accor...
Total: ~$3950-4450
Type R Inlet Style:
M8x1.25 30mm bolts! (Stock bolts will NOT work)
Mishimoto Inlet $305: www.mishimoto.com/turbo-inlet...
PRL Titanium Inlet $500: prlmotorsports.com/products/2...
Conversion Kit $175: prlmotorsports.com/products/2...
Conversion Hose $50: prlmotorsports.com/products/2...
Inlet Harness Cover $20: www.hondapartsnow.com/genuine...)
P2R Gasket $25: www.powerrevracing.com/17-21-...
Total: ~$570
Nice to haves!
Flex Fuel $525: prlmotorsports.com/products/2...
Front Pipe $400: prlmotorsports.com/products/2...
Turbo Blanket $180: stores.axionind.com/ptp-honda...
Downpipe Blanket $140: stores.axionind.com/ptp-civic...
Total: ~$1245
Current mods:
Civic Type R Turbo
Tuned by DRob @ IMW
PRL Flex Fuel
PRL Intercooler
PRL Downpipe
PRL Front pipe
Mishimoto Intake
Mishimoto Inlet
Mishimoto Catch Can
Swift Lowering Springs
Thermal R&D Exhaust
Please like and subscribe if you found this helpful!
Follow my socials!
IG: / qiu_media
TikTok: / qius_car_tips
Пікірлер: 31
VERY DETAILED QIU! KEEP UP THE GOOD WORK.
Dude that thing looks freaking SWEET! Great video man absolutely love your content!!!!!
Looking good man
Another perfectly-timed video, as we’re tackling this job next week and seeing DRob after Labor Day. Thank you Qiu, for all that you do 💪🏽
@Qiu_Media
Жыл бұрын
Anytime man, let me know if there’s any more questions! Hopefully I was able to cover it all
I’ve Derek Robinson and he has mentioned that the stock inlet pipe is not a restriction in power. How important is it to upgrade it and how much power did you gain?
@Qiu_Media
9 күн бұрын
He's correct, the main reasoning for the upgrade was due to the turbo upgrade and compatibility with the stock inlet pipe. There is some trimming on the inlet and waste gate in order to fit the stock one with a type r turbo or similar
$10k usually good estimate when really tryingto have a quick clean build on most cars Maybe start with flex fuel only then do wheels and suspension Then save for this turbo swap last
Are you selling? I am not doing all of that work. great video as usual.
Good video. How much power is the stock Turbo capable of? Also, many of the parts you listed parts that are needed anyway for more power even if the stock Turbo was retained? For example, I assume a new downpipe is needed for more power from the stock Turbo anyway. Hope that makes sense.
@Qiu_Media
Жыл бұрын
Stock turbo is good for around ~330hp with e30 mix. Most of the parts listed can work for a stock turbo still, downpipe would help for sure.
Hey doing an instal within the next month. Hondata states that you can use a Civic Type R STOCK downpipe, as one of the parts needed. Is this true? Just wondering before I buy this DP, Do not wanna go aftermarket like rv6 or prl bc im running rev9 which is gonna be too loud for daily use.
@Qiu_Media
4 ай бұрын
Yes, you’ll need a type r style downpipe, since the housing for the primary o2 sensor gets moved
@soal4690
4 ай бұрын
@@Qiu_Media thank you so much! After the last couple days of research. the finishing build is rv6 dp, mishimoto intercooler, mishimoto turbo inlet, and type r turbo. Im assuming your thermal blanket is a type r blanket that is fitted on an accord heat shield?
Hey how's it going? Thanks for the videos & updates. I had an 18 and now a 22 . How long do you see yourself holding on to this car? I heard you mention air ride suspension. The 24 Accord is 1 year away, any thoughts on that?
@Qiu_Media
Жыл бұрын
Gonna try holding onto the car for awhile, it's been treating me real nicely. Especially in the current market of cars, it would be a challenge to find one at a good price if I did get rid of this one. Seen some leaks of the 24 exterior shots, need to see one in person to get finalized impressions
Do I need the type r actuator and arm or can I use the one from the accord?
@Qiu_Media
10 ай бұрын
The wastegate solenoid you can use from the accord but you’ll need a different arm
@chrisk8522
10 ай бұрын
@@Qiu_Media thanks I appreciate it
yo bro did u bypass the solonoid?
@Qiu_Media
Жыл бұрын
Ah! I knew I forgot something making this video 😅
@samlim8654
Жыл бұрын
@@Qiu_Media im looking around to get the hose and the cap.
I want to do the same to my car but it sounds expensive as hell, honestly. Even with some used parts. Sheesh.
@Qiu_Media
Жыл бұрын
Gotta pay to play 🤣 honestly not awful compared to other platforms to gain power
@Mistadontplay89
Жыл бұрын
@@Qiu_Media how long have you had these parts and tune on your car? Have you had any problems yet?
@Qiu_Media
Жыл бұрын
Been about 10k miles no issues. Only annoying thing was the Mishimoto inlet pipe having flaking paint
@zacharyhart2279
Жыл бұрын
Does the Mishimoto pipe hit something or what? Which PRL tube do you use to connect the Mishimoto intake to the Mishimoto inlet pipe? Should the Mishimoto inlet pipe fit the factory 2.0T turbo for now?
@Qiu_Media
Жыл бұрын
@@zacharyhart2279 Mishimoto pipe doesn't hit anything, just poor paint quality. PRL Conversion tube using the TIP version fits fine