😫😫 10th Gen Accord Big Brake Kit Install - Making it Work!
Автокөліктер мен көлік құралдары
Used a set of Genesis Coupe Brembos (any year) and Nissan Rogue (2015-2017, 3 row -- 320mm) rotors, with EBC red stuff. Final spacer size used is 18mm to have it just barely clear the calipers.
Current mods:
Civic Type R Turbo
Tuned by DRob @ IMW
PRL Flex Fuel
PRL Intercooler
PRL Downpipe
PRL Front pipe
Mishimoto Intake
PRL Titanium Inlet
Mishimoto Catch Can
Swift Lowering Springs
Thermal R&D Exhaust
Please like and subscribe if you found this helpful!
Follow my socials!
IG: / qiu_media
TikTok: / qius_car_tips
Пікірлер: 53
Good work !! That thumbnail is 🔥 love the new set up
Thats sick!!
Need a followup video on this! Planning to do it on my 2.0T sport.
Can you make a follow up video on the brakes.
Tried test fitting my 08 tl type s rotors with these calipers. Didn’t clear at all…. They were basically clamped to where the caliper mounts. Returning those rotors and trying these so I don’t have to use spacers.
Finally a much easier way to get Brembo's on my 2018 Honda Accord.👍 Did you need a centric hub ring for the rotors to fit snuggly?
@Qiu_Media
Жыл бұрын
No need, Nissan rogue rotors fit right on :)
@edwardtan4631
Жыл бұрын
@@Qiu_Media so the Nissan Rogue Rotors are centered on the Brembo? I've read that you can also use the 350z rotors.
@Qiu_Media
Жыл бұрын
@@edwardtan4631 Nissan Rogue ones are centered. I have also heard 350z ones work but you may need a shim or spacer
This would alleviate the track pad selection for the 2.0L accords for the front, but still has anyone found track pads for the rear of the accord ??
@Qiu_Media
Жыл бұрын
I don't know if you're in the Facebook groups, but I recently posted that Type R Rear Pads will fit the accord. Ordered a set of EBC Red Stuffs for a Type R and they had no issues going on, so that opens the door for more compound options (i.e. Blue Stuff from EBC, Hawks)
Landing gear stuck?
How you like them does it really makes a difference? Im looking to do this conversion too. thanks
How centered was the rotor in the caliper? Hearing some mixed reviews on what rotor to run and just want to make sure the rogue rotors are going to work
@Qiu_Media
Жыл бұрын
Rogue rotors were perfectly centered, no trimming or shaving.
@huntrusso
Жыл бұрын
@@Qiu_Media fantastic! Thank you for the reply
what size offset for wheels would fit for the brembos?
@Qiu_Media
Жыл бұрын
Will depend highly on wheel design. A good starting point is a 9.5 wide with a +35 offset but that does not always guarantee proper fitment since spokes can be more concave
I’m barely seeing this a year later but how is this conversion holding up?
@Qiu_Media
4 ай бұрын
Everything’s been working great with it!
i imagine this set up wont clear stock wheels correct?
@Qiu_Media
Жыл бұрын
It will with a 25mm spacer
Would you happen to have the link of the rotors and pads you’ve purchased im soon to acquire a pair of brembos and wanting to piece everything together
@Qiu_Media
Жыл бұрын
Rotors used: www.buybrakes.com/raybestos-980638fzn-element3-fusion-coated-disc-brake-rotor Pads used: www.amazon.com/dp/B00PZVTVM2?ref=ppx_pop_mob_ap_share
@AlejandroRodriguez-og1kg
Жыл бұрын
@@Qiu_Media thank you so much for the help
@AlejandroRodriguez-og1kg
Жыл бұрын
@@Qiu_Media i was curious for the rotors did you use a hub ring or did the rotors fit perfect around the hub
@Qiu_Media
Жыл бұрын
@@AlejandroRodriguez-og1kg No hub ring needed, fit just fine on the hub
@AlejandroRodriguez-og1kg
Жыл бұрын
Did you have to use the banjo bolt from the genesis callipers or where you able to use the accord oem ones for the brake line
Which make and model caliper and rotor? Please
@Qiu_Media
Ай бұрын
Caliper from any Genesis couple with the brembo package, rotors are off a 3 row Nissan rogue (330mm)
You need concave wheels to clear brembos with no spacers
@Qiu_Media
Жыл бұрын
Yessir, thankfully spacers and a small fender roll made it work. Too lazy to find new wheels lmao
@Stoptechaccord
Жыл бұрын
Convex will with a lower offset than stock!Concave u still need 5-10mm since convave spokes bend closer to caliper body!
How are those continentals with traction?
@Qiu_Media
Жыл бұрын
They’re okay when the temperatures are mild (50-70ish), they’ll spin in the cold (though many tires will too) and in the warm they’ll suffice. If you’re after performance, a dedicated summer tire is better
Got a link on where you bought the brakes?
@Qiu_Media
Жыл бұрын
Off Facebook marketplace, eBay or local is probably best way to grab brembos for cheap. There are services like slickfab that’ll send you a fresh pair of brembos for like 1k, but for that price, I’d recommend 27wons kit. Much thinner 4 pistons that’ll clear wheels easier
@herrerajoe9770
Жыл бұрын
i’m selling some for 530
Where did you get those brakes
@Qiu_Media
9 ай бұрын
From facebook marketplace, they're a rebuilt set someone locally was selling
What is the offset of your wheels?
@Qiu_Media
Жыл бұрын
+40, with an 19mm spacer and the rotors being another 2-3mm, I'm at +19 or so now
What offset was your wheel?
@Qiu_Media
Жыл бұрын
The Tesla wheels were I think +40 offset. Don’t remember, ended up selling them for wheels that fit
Does it fit with the stock rims ?
@Qiu_Media
26 күн бұрын
Stock rims require 25mm spacers
That’s nice but…spacers can cost damage to your wheels, put weight, pressure. Don’t be surprised in the future…your tires will wiggle…on less you trying to build a race car?
Why? It's a low powered family sedan not a racecar.
@bigpapi9223
Жыл бұрын
His is making close to 400hp
@calinikka4life
Жыл бұрын
He making some power so he gotta get some better brakes. Dont worry why. Its his build let him do what he wants.
@turboprodigy
Жыл бұрын
Just so you the gen coupe came factory with like 300 hp those brakes
@nolanjordan
11 ай бұрын
Keep sleeping on em 🤞