Thank you! You saved me a lot of headache doing this DIY. I soaked the nuts 3 times within an hour using Seafoam Deep Creep. I loosened it until I heard a crack, sprayed more penetrating oil then tightened it again. After that, the nut loosened like butter.

@BCautosolutions

2 жыл бұрын

Good job, thanks for watching

Wd 40 works

@BCautosolutions

2 ай бұрын

Not really. I’ve tried it, but if it worked for you 👍🏻👍🏻

That penetrating oil is the best. Been using it for years in the aircraft industry. Thanks for sharing and stay well and safe Artie 👍

@BCautosolutions

3 жыл бұрын

Yes it really is good stuff, best Ive used but I’m always open to trying new products, tools, ideas. Thanks for watching sir 👍🏻

@arthurfricchione8119

3 жыл бұрын

Have you ever tried a 50/50 mix of Dextol transmission fluid and acetone also works well. Artie 😊

Love your work bro! Keep it up!!! 😎

@BCautosolutions

3 жыл бұрын

Thank you!

Love this kind of content keep it coming 👍👍👍

@BCautosolutions

3 жыл бұрын

Thanks will do 👍🏻

Way to go g!

@BCautosolutions

3 жыл бұрын

Thanks Dude 🙏🏻

Dope!!

@BCautosolutions

3 жыл бұрын

Thanks for watching 🙏🏻

anyone been getting the cel with a p0420 code after installing the catted downpipe and frontpipe?

@BCautosolutions

2 жыл бұрын

You can disable the code with Ktuner/Hondata or use a proper defouler as wel

Can you tell me what's the thread pitch, for the manifold bolt and nuts

This video is helped me immensely with my PRL DP install. Good content.

@BCautosolutions

3 жыл бұрын

Glad to help. Thanks for watching

Whered you get the plug for the o2 sensor hole

@BCautosolutions

2 жыл бұрын

Stainless O2 Sensor Plug M18x1.5mm With Copper Washer - Ticon Industries www.amazon.com/dp/B078NXL1MF/ref=cm_sw_r_cp_api_glt_i_SEN7MHQTXZ55662GDWP0

What kind of penetrating oil do you use? Getting ready to do a 2011 6.6 Duramax that is rusted bad.

@BCautosolutions

3 жыл бұрын

Kano sili kroil, I’ve added a direct link in the video description. It’s pricey but sure worth the money.

Need this done to my accord along with the front pipe … how would I get into contact with you to get this done …. I’m from New Jersey

@BCautosolutions

2 жыл бұрын

Bcsutosolutions20@gmail.com

Great video I ordered a can of that oil. My lower bolts are pretty rusty I’m more worried about breaking those that the Upper bolts. Great video tho. For the 4 upper did you just use a breaker bar with an extension or an impact ? Thanks for all your help

@BCautosolutions

10 ай бұрын

Thank you! I use a longer 3/8 ratchet, don’t use anything impact.

@joerossi4231

10 ай бұрын

@@BCautosolutionsdo you recall what size nuts those 3 are on the bottom of the downpipe ?

@BCautosolutions

10 ай бұрын

@@joerossi4231 14mm heads

@joerossi4231

10 ай бұрын

@@BCautosolutions got it sir , thank you , soaked all my bolts overnight with the special sauce (Kroil ) and all popped loose with a large break bar tops and bottom. Pipe is on your the man appreciate this video so much !!

@BCautosolutions

10 ай бұрын

@@joerossi4231 thanks for sharing! Congrats

What part of jersey ?I need a downpipe installed .

@BCautosolutions

2 жыл бұрын

Middlesex county if your intrested shoot me an email. Bcautosolutuons20@gmail.com

Would this work for the 1.5t?

@BCautosolutions

2 жыл бұрын

For sure

How much you charge? For downpipe

@BCautosolutions

2 жыл бұрын

Shoot me an email. Bcautosolutions20@gmail.com

Installing an RV6 downpipe on Sunday, I'm dropping car off Saturday night, does the mechanic need to soak the bolts Saturday or can he do it Sunday while car is super cold from sitting over night?? BTW 10th gen Accord touring model

@BCautosolutions

2 жыл бұрын

I would take shields off turbo sat night and soak bolts, then on Sunday before starting to remove the bolts I would once again soak them. Good luck 👍🏻

@stephenrusnell8698

2 жыл бұрын

@@BCautosolutions that is what I will do, thanks again for everything and the advice.

@BCautosolutions

2 жыл бұрын

@@stephenrusnell8698 no problem

Was there any issue trying to place the oem heat blanket over the dp?

@BCautosolutions

3 жыл бұрын

No

Get yourself the BOLTBUSTER I GUARANTEE YOU IT'S WORTH THE MONEY. TIME IS MONEY YOU WILL SAVE A SHIT LOAD OF TIME WITH IT. NICE WORK THOUGH

@BCautosolutions

3 жыл бұрын

Bolt buster is an awesome tool and a must have imo and is on my list of tools to get but in this case heating up the nuts doesn’t work (atleast for me it didn’t both times I tried with a torch). I’ve tried multiple methods of removing these nuts and this way my only successful way repeatedly. Thanks for watching and your feedback 👍🏻

Great video!! I just subscribed 👌 Where are you located it?

@BCautosolutions

3 жыл бұрын

Thank you and thanks for subbing! I’m in centra/north jersey

Hey. I have 2020 Accord 2.0 Turbo 6 speed. I want to put a new intercooler, cold intake and downpipe on it. Maybe even a turner. Looking for more horsepower. Can you give me some advice on that? If come to you but I'm in Queens New York.

@BCautosolutions

3 жыл бұрын

Yes I can do it for you. Shoot me an email: bcautosolutions20@gmail.com

@jeromewhite4009

3 жыл бұрын

I emailed you. Don't know if you received it or not.