CTR PRL Inlet Pipe For 10th Gen Accord 2.0T
Үй жануарлары мен аңдар
I got the PRL Inlet pipe for my 10th Gen Accord 2.0T. I'm so excited to drive my accord since the installation is done. Drove the Accord and I got the engine ON 😫.. The Code is P0046 Turbocharger. I msged few ppl in FB Group (10th Gen Accord Performance/AXF)they all suggested Checked the Harness connector,air leak, broken sensor etc.... And NO luck full day smh. I decided to put the stock inlet after removed all parts and CTR heat shield left to remove soon I removed the heat shield I noticed the shield have dent on it. I put the PRL Inlet back to try again and see what happen. Yes!!!! the CTR Heat shield is the issued cuz the Westgate have those calibrated and the Westgate arm is hitting the heat shield. Finally solved the problem. Thank you to FB Group on 10th gen accord 🙏🙏🙏
Thank you for watching! 🙏
Follow me Instagram 👉 @Kulblue
I don't own the music
Пікірлер: 62
Just picked one up from axion. Thanks for the tutorial
Thank you Kul Blue and xgen for helping.
Very helpful. Thanks bro!
What size hose & splicer did you use for the top engine cover coolant line
What gasket did you use? I heard some people on the Facebook group talk about a heat restrictive gasket. Thanks in advance! Your videos are what I'm going to use when I install my mhi turbo
👍
Do u have the part number for the type r coolant lines
Where did you get the 90° hose that connects into the breather tube, and what parts are needed to relocate the coolant return line?
@Kulblue
2 жыл бұрын
You can get Amazon or autozone
Hey quick question, where did you find the smaller steel vacuum line that sits opposite to the coolant line on the inlet? It's the piece you screw in to mount it on the inlet? Ive been trying to find one but not even sure if I'm typing the name in right
@Kulblue
2 жыл бұрын
I got it from autozone.
@gordonharris5788
2 жыл бұрын
@@Kulblue is just a steel vacuum line? Or did you have to ask them specifically?
Can you please post the OEM part#s for the coolant hard line, black air line, and bolts?
@Kulblue
3 жыл бұрын
Will do
@samlim8654
2 жыл бұрын
@@Kulblue hi , can i know wheres the part
I just installed mine with a PRL P700 turbo and I got the all the same codes as you after 10 minutes of driving. But I never put the heat shield on. So I’m lost on what is wrong. Did you ever get codes or warnings again?
Cool vid. But this is absolutely the WORST purchase I made to date! Heat soak is rediculous.
@Kulblue
3 жыл бұрын
Even you have the blanket?
@fred_b_360
3 жыл бұрын
@@Kulblue yep. It’s still horrible. I’m going to powder coat it soon to see if it makes a difference.
@Kulblue
3 жыл бұрын
@@fred_b_360 dang.. I will upgrade my turbo soon and with ptp blanket.
hey I plan to get a prl inlet but I was told since I already have a PRL HVI with stock turbo there wouldnt be any modifications needed just bolt on snd go🤨 now Im confused
@Kulblue
2 жыл бұрын
Won't fit the prl inlet on out stock turbo. You need type r turbo or stage ll turbo.
@remo9310
2 жыл бұрын
@@Kulblue by stage ll turbo you mean 2.0T? because I have that...now after doing more research everyone is telling me all I need is a new coolant line and an extra coupler cut to slide inside this inlet coupler at the maf housing
@Kulblue
2 жыл бұрын
@@remo9310 yes you need that. I think the PRL have already for that kit. check the prl website.
what if i dont use heat shield , i use the ptp blanket for type r turbo? is it gonna fit?
@Kulblue
2 жыл бұрын
Yes I used the type r blanket
Why are your valves ticking so loud??
Did you replace the downpipe at the same time but cut that part out the video? How did you relocate the oxygen sensor?
@sol1229
Ай бұрын
did you ever figure out the answer to this? i’m curious as well
@jasonsamedy7220
Ай бұрын
@sol1229 you can't install the prl inlet without replacing the downpipe to relocate where the O2 censor goes. This guy edited out the part where he replaced the downpipe making it look like the inlet can be installed without doing the downpipe
Do you have a part number for the metal coolant lines that run along the sides of the inlet? I can't seem to find them on hondas parts online
@Kulblue
3 жыл бұрын
I used rubber hose and stock accord coolant hardline
@gordonharris5788
3 жыл бұрын
@@Kulblue oh shit I feel dumb, I didn't even realize that was the accord line. Have you still be going around with the heat shield off with no problems?
@Kulblue
3 жыл бұрын
@@gordonharris5788 I put tge heat shield.
@gordonharris5788
3 жыл бұрын
@@Kulblue it was able to work with a new one? Cause that was part of your problem in the video right?
@Kulblue
3 жыл бұрын
@@gordonharris5788 I used the stock heat shield I drilled the holes. Did u watch the video? Lol
Where did you buy your kit from? And did you order a whole kit or did you have to buy separate parts?
@Kulblue
3 жыл бұрын
You can get it from stores.axionind.com/ msg them and check the IG or Fb . The hoses bought autozone others are from honda .
@Babyjokers2.0t
3 жыл бұрын
@@Kulblue aye you got it from axion? Heck yeah man I get all my things from there
@Kulblue
3 жыл бұрын
@@Babyjokers2.0t yes the most of my parts from axionindustries
@axionind
2 жыл бұрын
@@Kulblue Thanks dude
Stud type r in the video the short one what is part number
Is this with stock turbo?
@Kulblue
2 жыл бұрын
Yes.
@edthetank10
2 жыл бұрын
Is it worth it and if so what else do I need to install it
Titanium FK8 inlet pipe from where you order it
@Kulblue
3 жыл бұрын
Axionindustries.com
@axionind
2 жыл бұрын
We have them in stock man
Are you running ctr turbo also ?
@Kulblue
3 жыл бұрын
No. Stock turbo
@03DREWSK33z
3 жыл бұрын
@@Kulblue oh nice I have inlet just stock turbo I didn’t know it can be run without turbo good to know.
@Kulblue
3 жыл бұрын
Make sure use your stock heat shield for now till get the upgrade turbo.
@03DREWSK33z
3 жыл бұрын
@@Kulblue gotcha I might be getting type r turbo soon so maybe I’ll wait but I appreciate the video
@Kulblue
3 жыл бұрын
@@03DREWSK33z oh nice brotha!!! Waiting my stage 2 😉
This video is horrible. I dont understand what the hell he is doing. The prl turbo inlet tube is silicone for the accord. What is this stainless pipe? For the civic 1.5
@Kulblue
Жыл бұрын
Sorry about on my video. This is for 2.0L accord or type r inlet pipe.