Did you re-use the gasket that came with it? I know it only sends 1 with RV6.

Any difference in power gains? Or is this mostly for sound?

If you were to do this on someone else’s car how much would you charge them for putting a Down pipe and a front pipe on a 2020 accord

Installed one last night and It threw out a lot of warnings(brakes,assists and uphill start)and CEL. Is that normal?

im noticing slight rattle after the DP install. im guessing its the heat shied touching. It only happens at a stop with the AC and when the car reaches around 130+ iats FL weather. Are you experiencing anything like it?

What does everyone recommend when it comes down to Rv6 downpipe or prl downpipe ?

So would it be worth spraying and heating the nut to loosen it or just turn the whole nut/stud in one piece?

If you were to put a down pipe and a front pipe on a 2020 accord how much would you charge them ; the reason I’m asking is Bc I’m doing it for a customer and I don’t wanna over charger them

Do you happen to have the torque specs on all the bolts removed? Or are we going with gutentight

I just installed my rv6 dp but didn’t place the heat blanket over the dp, are there any negatives Because of that ?

Love the video. All your help is appreciated. Always great to see someone that makes a mistake tell others how not to. Was that the only nut you had to heat up?

How did you get to the lower two bolts for the top end of the down pipe? We’re they easily accessible like the tops? Bottom seems very straight forward. Thanks in advance. 2022 2.0 Touring with 500 miles and got the ktuner and PRL HVI arriving today!

Yo boss hope you’re having a great day. I just installed my PRL catless downpipe & im also runic Borla Catback Exhaust with stock midpipe. For whatever reason, my setup sounds raspy do you have any idea what could cause that? Im currently untuned should be running Phearable Stage 3 later today I don’t know if that could help with sound. I know it’s a different downpipe but it should be similar process

I’m looking at a few downpipe options. What made you go with RV6 over PRL or other brands?

I'm about to install the rv6 downpipe and just wanted to make sure that the accord plug goes on the top since that hole is not used right?

So if was to do this myself, would the penetrating oil and torch be something I absolutely need to remove the lock nuts ?

Did your 02 sensor go off at all any lights pop up on the screen

Did you reuse the gasket and bolts?

How long did it take you to do this?