Another cunning plan Baldrick? Turning your microphone level down so that we, your loyal viewers turn our volume up to revel in the subtle tones of your sweet voice until.......the bloody alarm goes off. Nearly shat myself which would not have been good as I was sitting on the couch wearing only my dressing gown. The 'black death' was very nearly supplemented by the brown brew. Both the Vito and myself seem to have survived the incident unscathed, this time.

That alarm episode is up there with the smoke filled cab! 🤣

You bollocking Fudgy for the ''F'' bomb then the alarm goes off........on a par with the cab filled with smoke episode......brilliant🤣😂

Honestly this has been brilliant for our Wednesday evenings entertainment 😂😂 the alarm cutting was like bomb disposal meets carry on films. Toaddead is top quality 😂😂 As ever you and Fudgie are the morcambe and wise of spanners. Perfect thank you

Carried out this job twice now. Firstly 2007 1.4 TDCI Ford fiesta with 128000k - Injector 1 only! Chuffing away and bringing a diesel fragrance into the cabin. Black muck everywhere. I agree only replace what you need to. Watching videos like this one, gave me the confidence to do the job my self, the only tool you need in addition is a cutting tool, oh and a plastic drinking straw! Adapt the straw to fit a vacuum hose to help with cleaning the ports and holes etc. with my new found experience I then had an injector issue with a 2012 1.6tdci ford cmax with 81000k. Having no computers to fully establish which injector was really busted (no 1 as it happens ) I whipped them all out and gave to an injector specialist in yate who happens to be a customer of mine. Who provided an awesome service tested every injector and established the broken one and provided a replacement . (I even have an heads up as to which injector is likely to fell next) so replacement re seating them with new copper seals. Top tip based on my own experience get seals from the dealer ie Ford, just a better fit. Again AL I’m glad you covered this topic on the diesel engine. Interesting my car has had a replacement injector before by Ford (injector 4) originally I paid Ford to do this as part of service and warranty etc. thing is I paid for this work just for one and it was a lot of dosh. The injector test I had told me that this was a recon that Ford used?!?!?! I paid a lot of dosh for and this injector is more than likely to fell next! 🤔

13:06 that is the happiest looking scuttle panel I have ever seen.

@mikeburnitt403

4 ай бұрын

I cant unsee that now!🤣

Dot4 brake fluid works a treat, leave overnight and steam clean in the morning

👍 Great channel.

lovely cheap repair to keep the old girl going sterling work sir!

Just what I need on a wet miserable Wednesday evening whilst the kids are swimming… good work lads 👍🏻

Absolute bargain for that guy Al, nice honest repair.

Thanks Al. Your channel often makes me chuckle, but I rarely laugh out loud at anything I watch. Your reaction to setting the BL@*DY alarm off made me LOL for real. The last time that happened to me, I was working on a horrible LR Discovery that my ex gf had unwisely bought. I cut all the wires but it didn't stop. It apparently had a battery in the horn itself, so I ripped it out and dropped it in a bucket of water. It took an impressively long time to die!

Brilliant work there matey very thorough. Most mechanics these days just ain’t got the passion for it.

Excellent Al, thank you for another good watch!

Al, i think Fudge set the alarm off when he said the F Bomb 😂. The alarm is very sensitive. Another great episode lads.

@stevelodge6506

4 ай бұрын

😂

That's the only way to deal with after market alarms!🤬 Cut all wires and forget about it!!!😁 Educational and interesting as usual and Fudgey having a smashing time in the background. Happy Wednesday 👍

Must be the mid week episode we were promised. Thanks

Very reasonable- I’ve often wondered how much you charge, another educational video , top work 👏🏻👏🏻

Cracking job and video as usual Al and what a tidy motor too! :)

Another quality bit of viewing. Cheers chaps.

Midweek essential viewing completed. ✅ Looking forward to the Sunday video.

Awsome video boss

you never fail to put a smile on my face apart your mam and dad house but that was different

👌👍 Nice to see 👀 you on it old school with all the skills

Brilliant I actually followed you the video on the head gasket replacement on my sprinter 646 thanks

Billy dog went mental when that alarm went off. Not enough Fudgie in that video! 😂

I hate cheap aftermarket alarms so much 😂😂. I remember once working on customer's car. An the alarm kept going of on it the guy i was working with came along cut it out and hit it with a 1 pound hammer when customer came back to collect it he said oh I have some spare parts for you he gave him the remains of the alarm 😂. Nice work there Al an Fudge no more f bombs 😂😂. I will have to go to church twice now on Sunday 😂😂.

Every video is a gem Al 👍

Nice one chaps 😂 full of cunning brilliance 😅❤

Excellent video Al

Well think that Vito was screaming at you Al with that alarm going off lol.another great job.tell fudge put a £1 in the swear box lol

I have just done the injector seals on a Ford Kuga and spent ages trying to clean the black death off it, I wish I had known about that cleaner beforehand.

Finally got my lt 158 back in the road thanks for your encouragement matey

@6DDIESELSDorset

4 ай бұрын

Good going fella 👍

Great stuff, as always 👍

Great fix .

Can't even count how many injectors I've mined out over the years on mercs. As an ex mercedes trained technician it was a daily task. Always dreaded it

Another great and hilarious video has always al and fudgie 👍

Clean van al great job

Those labour rates are excellent,here in the states an independent shop like you lads about 75,90 $ hr,can't go near a dealer unless it's covered by warranty And most have the stooges employed,who's favorite vernacular is idk,more 6D diesels 👍

Nice one Al . Pity you weren't close to me I come to you for my car service. Bit far Cornwall to Dorset 😂👍

Put the subtitles on for the post fix talk over the engine running and it said "Right up the bott with Leakage Lil"😮 The mind is well and truly boggled now.

Fairplay all but I always do the lot while I'm in there but that's me have to say for a man of your skill £65 an hour is cheap nowadays no your worth mate love your vids keep em coming m8😊

You know your stuff pal… I’m even considering making the long journey down when I need owt doing !!…. Just bought a 67 plate lwb 314 sprinter with a genuine 40k on the clock . What do I need to look for or maintain … cheers

Well that alarm going off was a tad annoying. Still the bulkhead under the screen seemed happy enough with its little black eyes and smiling mouth. 😂

Ipa hand cleaning goop is quite good for black death and it stays put while it's dissolving overnight.

Good job , and a cheap fix for the customer

Great video Al. Have a good week

@6DDIESELSDorset

4 ай бұрын

Same to you👍

Vito's are nice but not cheap to fix when they go wrong.

Fine job....

Hello Al great job and at a reasonable hourly rate can you believe Jaguar Land rover are charging £190 an hour labour . Also there is a dedicated slide hammer tool you can buy just for pulling injector washers out ,it has a tapered thread on the end and it works first time every time.

£65ph is not just £65ph when the man chargeing knows more than a spotty newcomer with a computer "there's no school like the old school and al's the headmaster" coming to al is free real raw education they dont teach anywhere else thankyou chaps see you on the next one, a side note what about an live maybe for night only.

@6DDIESELSDorset

4 ай бұрын

Ill see if my technician ability can figure that 👍

@plantiuspottius2400

4 ай бұрын

🙏 all hail al and fudge

Have you tried testing the COPPER washers with a magnet ? us green oval nutters have had problems with the " blue box " company where copper washers stick to magnets, I found out the hard way they don't seal very well, great show lads brightens up the day.

Bloody alarms going doda😮‍💨 had the same when the alarm went off as i was locked off a security van 😮 luckily enough the bonnet was faulty and i was able to pull the wires off the speaker..... no cameras back then so you could get away with that, nowadays you'd be on the carpet

Good job I always heat da copper washer on the end of a screw driver with a blow torch before you dropped it in seat's better

You need to visit the shop that sells something for the weekend Al, they sell haircuts as well man 😅

So, Al, the moral of the tale is don't pressure wash Toad alarms? Lesson learned! Cheers

@6DDIESELSDorset

4 ай бұрын

It worked fine one it dried out lol

ps hope thing are getting sorted

Aftermarket alarms need a 12lb rejuvenation device at high speed repeatedly.

At least that alarm wasn't one of those that changed tones every few seconds, those are the worst, most obnoxious pieces of aftermarket excrement anybody could have fitted to their cars, onc had one of those blaring away for HOURS outside of my workspace in the computer shop I used to work for, think the police ended up "disabling" it for disturbance of the peace...

The holes in the scuttle panel look like faces, especially on the right side 😀

Need fit new fuel pump in my 651 14 plate sprinter. Right looking forward to it! Being 6ft 8 wish a had a skilled little human to plounk in the engine bay to do it! Van has done 289k so no shame init

Al, good job youre not on bomb disposal, holding a long term contract...LOL...

Excellent as always. So when you re seated....metal swarf or not? And is that a daihatsu sportrack....cheers

@6DDIESELSDorset

4 ай бұрын

All cleaned out and it’s an F73 fourtrak 👍

Entertainment as always 😝

oven cleaner foam is good for cleaning that crap up :)

Hi al love the videos as usual just wanted to update you on the 3.5 ton tipper situation. I’ve just purchased a iveco 3.5 ton tipper 21 plate with19k miles and after first 5 days has been brilliant so far, thanks for your advice pal! Also I have 1 other van which is ford transit connect limited 2019 (69 plate) that is just coming up to 70k miles which I plan to keep for another yr and I’m about to have it booked in at my local garage for a major service but after watching this video on the Vito I’m wandering if I should have cam belt and anything else done while it’s there. Do you recommend having the belt and water pump done at same time as a major service fella? Any advice would be much appreciated pal, would love to bring down for you guys to do but being from Maidstone in Kent little bit far haha many thanks for all your videos too mate.

@6DDIESELSDorset

4 ай бұрын

I have a feeling a transit connect of that age has a wet belt for the oil pump ( they are bad news) I’m sure you can get a conversation to put a chain back on it 👍

@leonjones7404

4 ай бұрын

@@6DDIESELSDorset ok mate thanks for your reply, when booking it in for major service I’ll ask if I can get wet belt swapped for a chain, I would still need cam belt changed tho mate wouldn’t I? And should I ask if cam belt kit comes with water pump kit too? Many thanks mate I know your a busy man

If it’s a German diesel engine big Al & Fudge can fix it 👏🏻 even with a big siren Bleeping out 🤣

I remember the ball ache involved when 613's stripped the thread on the holding bolt after the last twat overtightened 'em. at least access was a tad better.

Al thanks for another very good how to it looks so easy ,question for ya . Just got a 2007 w639 111 diesel it has a metalllic ticking noise at low revs which disapears on higher revs but it is quite pronounced when it is ticking ,what could that be ? and its not blowing by either have cheacked that before asking 😉

@6DDIESELSDorset

4 ай бұрын

I’ve had it with a shot injector you’d almost say it sounds like a little end gone. Changed the injectors and it went . Could possibly be a cam bucket 👍

@g7puw

4 ай бұрын

@@6DDIESELSDorset thank you for the heads up will take a look how much are you selling injectors for ?

Al any more transfer station news mate ?. Im glad i hadnt got my head phones on when that alarm went off 😂

@6DDIESELSDorset

4 ай бұрын

Nothing has changed sadly we’ll keep fighting 👍

Are there any oil passages that can get wet when you steam clean that area? Would be my biggest concern... That cleaner spray seems to do a nice job, with some help from you... 😉 Thanks for showing, really interesting! 👍👍👍

@6DDIESELSDorset

4 ай бұрын

No all sealed up 👍

I spy a beautiful French Sprinter 😍

@6DDIESELSDorset

4 ай бұрын

I’ve got a few lol 👍

Does (Full fat) Coke work as de-carboniser, heard from mechanics over the years but never tried it. Miss the edit out Al of Fudgies "F" Bomb!!! 😂😂😂

Al: Just needed 2 injector washers replaced. Customer: Just 2 washers? Nice cheap repair then...

@6DDIESELSDorset

4 ай бұрын

Yes we have to explain that all the time!! It can be hours of pain…👍

The Black Death is murder to get off done a few Al I use a steam cleaner with heavy t f r on and on and on 😩

I had a 55 plate vito I brought with 2 injector seals gone unfortunately some clever bugger couldn't get the injector out so decided to try winding the bolts down tighter wrecked the thread in the head , I tried a helicoil that didn't hold so ended up with a insert in there , 18months later another one failed on a different injector, horrible things , lovey van to drive and wasn't bad on fuel , would have a another one though

@6DDIESELSDorset

4 ай бұрын

Easy to fix with the right kit 👍

what size thread cleaning tool for the stretch bolts

@6DDIESELSDorset

Ай бұрын

Run a grinder Zip disc down an old one, make a long groove work a treat for getting g all the black gunk out 👍

give me giggles.

How long was the owner driving it before he brought it in for it to have that much black death build up?

@6DDIESELSDorset

Ай бұрын

In his defence we couldn’t get it I. For over a month and that’s not the worst I’ve seen 👍

Nice tidy Vito 😅

I got NM08LWS

Is there any progress with the rubbish tip behind your parents house?

@6DDIESELSDorset

4 ай бұрын

Sadly not as expected, nothing has changed

Is an injector seat cutting tool easy to use? I have a 1.4 hdi which is leaking.

@6DDIESELSDorset

3 ай бұрын

Yes not difficult 👍

@Mrtom248

3 ай бұрын

@@6DDIESELSDorset do you fit a standard injector copper washer after cutting?

@6DDIESELSDorset

3 ай бұрын

Yes it minuscule amounts you take off 👍

@Mrtom248

3 ай бұрын

@@6DDIESELSDorset thanks. Will give it a go. Keep up the great videos.

Hi. Enjoyed the insane comedic values.👍👍. As a keen model boater, just wondering whats happening to the IC boat? Appreciate you're busy and weather is mediocre but think a two minute update in next video would be a good thing. I love the VW content being a fan of the mark. 🤣🤣

@6DDIESELSDorset

4 ай бұрын

I will get the pair of us out of the workshop for the day! Believe me I’d like nothing more than to get it out on the water 👍

@paulwhite2023

4 ай бұрын

Titanic, here we come!

What is it about the OM651 engines you dont like Al ?

@6DDIESELSDorset

4 ай бұрын

Built to light , single chains rubbish sprockets and oil pump 👍

@Hillbillymills.

4 ай бұрын

Thanks for the reply, just asking as i have a 2014 C250 with the 2.1 OM651 😊

You still got that silver transit u robbed the engine out of my shell bit taty

@6DDIESELSDorset

4 ай бұрын

Yes still sat here

RIP headphones users 😂

Don’t spose you could demo ur expertise and show us plebs how best to remove glow/heater plugs 😁 please.

@6DDIESELSDorset

4 ай бұрын

Yes can do even the snapped off ones 👍

😂😂😂😂😂

What happens to the material from the seat recut? Does it fall into the engine? Or is it just gunk?

@6DDIESELSDorset

4 ай бұрын

It’s more like alloy dust, most tends to stick to the cutter head 👍

Dear Al , cheers £400 tv fecked completely with the ALARM going off and blowing the TV speakers damn it , still love the content but in future if that happens , headphone warning or just block the sound please or keep an anti noise hammer closer to feck the alarm speaker not my new TV . 😅

What's going on with your Greenie Crusade? Hate what they're doing to your Mum an Dad

@6DDIESELSDorset

4 ай бұрын

Nothing has changed sadly 😞

@dennisreid4428

4 ай бұрын

@ELSDorset Stuff like that makes me so angry!!!! Big money Vs the small man. Think they can do what they want and it'll all go away. Don't expect to much help from the powers that be,money talks. the power of youtube works though, if you name people and which department they work for and a couple of thousand emails. especially if they want to be re-elected or keep their jobs?

shh quiet...